Panasonic PT-VMZ40 User Manual

LCD Projector

Speciﬁcations

Main unit

Power supply Power consumption 365 W

BTU value Max 1246BTU

LCD panel Panel size

Projection system

Pixels

Light source Laser Diode

Light output

Time until light output declines to 50 %*

Filter Replacement Cycle*

Resolution

Contrast*

Screen size

Center-to-corner uniformity*

Lens

Compatible signal

VIDEO

RGB

BPR (YCBCR)

HDMI Moving image signal resolution: 480i*

AC 100V - 240V, (3.8A-1.6A) 50Hz/60Hz

NORMAL: 365W ECO: 295W SHUTTER: 70W

STANDBY MODE [ECO]: 0.4W*

[STANDBY MODE] is set to [NORMAL]: [AUDIO SETTING] → [IN STANDBY MODE]

is set to [ON]: 40W

16.3 mm (0.64 in) diagonal (16:10 aspect ratio)

Transparent LCD panel (× 3, R/G/B)system

2,304,000 (1920 × 1200)

4500 lm (When [LIGHT POWER] is set to [NORMAL])*

([INPUT SIGNAL] is set to [PC], [PICTURE MODE] is set to [DYNAMIC],

[DAYLIGHT VIEW] is set to [OFF],

[AUTO POWER SAVE] is set to [OFF]

3000 lm (When [LIGHT POWER] is set to [ECO][QUIET])*

20,000 hours 20,000 hours (Under the dust conditions of 0.08mg/㎥) 10,000 hours (Under the dust conditions of 0.15mg/㎥)

Filter can be washed and reused up to two times.

1920 × 1200 pixels

3,000,000:1 (All White/All Black) (When [PICTURE MODE] is set to [DYNAMIC],

[DYNAMIC CONTRAST] is set to [1])

0.76–7.62 m (30– 300 inches) (16:10 aspect ratio)

85%

1.6x Manual zoom (Throw ratio:1.09-1.77:1) / Manual focus lens,

F=1.6–2.12, f=15.30–24.64 mm

fH: 15.73 kHz / 15.63 kHz fV: 59.94 Hz / 50 Hz

Resolution: 640 × 400 to 1920 × 1200

Dot clock frequency: 162 MHz or less

PIAS (Panasonic Intelligent Auto Scanning) system

Resolution: 480i/576i to 1920 × 1080

Dot clock frequency: 148.5 MHz or less

The HD/SYNC and VD terminals do not support 3 value SYNC.

Still image signal resolution: 640 × 400 to 1920 × 1200 (non-interlace)

Dot clock frequency: 25 MHz to 297 MHz

PT-VMZ40

STANDBY MODE [NORMAL]: 18W

/576i*6 to 4096 x 2160

As of March 2019 1/10

VMZ40G_STZ_02_08/03/2019

LCD Projector

PT-VMZ40

Keystone correction range

[VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above)

Screen

Arc center

Screen

Projection distance Arc radius

Screen

Vertical arc correction (viewed from the side) Horizontal arc correction (viewed from above)

Projection distance Arc radius

Screen

Arc center

Screen

Only [KEYSTONE] used

Model No.

PT-VMZ40

Vertical

keystone

correction

angle α (°)

±25 ±35 ±25 ±35 1.4 2.9 0.7 1.6

・When [SCREEN ADJUSTMENT] is used, the focus may not be able to match the whole screen as correction increases. ・The curved screen should be in the shape of a circular arc part of a perfect circle.

Optical axis shift Vertical: +44%, 0% (manual)

Horizontal: +20%, -20% (manual)

Installation

Terminals

Ceiling/oor, front/rear

COMPUTER 1 IN

COMPUTER 2 IN / 1 OUT high-density D-Sub 15 p (female)

VIDEO IN Pin jack

HDMI 1 IN HDMI 2 IN

AUDIO IN 2

AUDIO IN 3 Pin jack x 2(L-R), 0.5 V[rms], input Impedance 22 k ohms and more

VARIABLE AUDIO OUT M3 stereo mini jack, 0 V[rms] to 2.0 V[rms] variable, output Impedance

USB [

VIEWER/WIRELESS/DC OUT

]

SERIAL IN

Projection distance Arc radius

[KEYSTONE] and [CURVED] used together Only [CURVED] used

Horizontal

keystone

correction

angle β (°)

Vertical

keystone

correction

angle α (°)

Horizontal

keystone

correction

angle β (°)

high-density D-Sub 15 p (female)

Min. value

of R2/L2

Min. value

of R3/L3

Projection distance Arc radius

Min. value

of R2/L2

Min. value

of R3/L3

[RGB signal] R: 0.7 Vp-p ,75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G) , 75 ohms, B: 0.7 Vp-p ,75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic [YPBPR signal] Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms

1 1.0 Vp-p, 75 ohms

HDMI 19 pin

2, HDCP and Deep color compatible

Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz) 4K/30p signal input compatible

M3 stereo mini jack

2, 0.5 V[rms], input Impedance 22 k ohms and moreAUDIO IN 1

2.2 k ohms and less

USB connector(type A)

1 for Memory Viewer/Wireless Module (Out put 5V

MAX 2A On standby, power supply is impossible when [STANDBY MODE] is set to[ECO].)

D-sub 9 pin

1, RS-232C compliant, for computer control use

As of March 2019 2/10

VMZ40G_STZ_02_08/03/2019

LCD Projector

PT-VMZ40

Terminals

LAN RJ-45 × 1 for network connection, PJLinkTM (class 2) compatible,

10Base-T/100Base-TX

Power cord length

Cabinet materials

Dimensions (W × H × D) Weight

Operation noise

2.0 m (6 ft 7 in)

Molded plastic

399 x 133*

x 348mm (15-23/32 x 5-1/4*7 x 13-11/16in)

Approx. 7.2 kg (15.9 lbs.)

37 dB[When [LIGHT POWER] is set to [NORMAL]] / 27 dB[When [LIGHT POWER] is set to [QUIET]]

Laser

Laser Class

Classication

Risk Group

Operating temperature

Operating humidity

NOTE: The <DIGITAL LINK/LAN> terminal and the <LAN> terminal are connected inside the projector. When using both the <DIGITAL LINK/ LAN> terminal and the <LAN> terminal, conﬁgure the system to prevent them from being connected to the same network directly or via the peripheral devices such as a hub or twisted-pair-cable transmitter.

USA and Canada: Class 3R (IEC 60825-1:2007) Other countries or regions: Class 1 (IEC/EN 60825-1:2014)

Risk Group 2 (IEC 62471-5:2015)

0–45 °C (32–113 °F)*

20%–80% (no condensation)

Remote control unit

Power supply

Operation range

3 V DC (AAA/R03/LR03 battery × 2)

Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor

Dimensions (W × H × D)

Weight*

48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16 in)

Approx. 102 g (3.6 ozs.) including batteries

Other Applications

Multi Monitoring and Control Software (for Windows) Logo Transfer Software (for Windows) Presenter Light Software (for Windows) Wireless Projector (for iOS / Android)

Supplied accessories

Power cord with secure lock (× 1) (× 2 for Europe / ASIA models) Wireless remote control unit (× 1) Batteries for remote control (AAA/R03 or AAA/LR03 battery x 2) Lens cap (× 1) String (× 1) (for lens cap)

Optional accessories

Ceiling mount bracket

ET-PKL100H (for high ceilings)

ET-PKL100S (for low ceilings)

Attachment for ceiling mount bracket ET-PKV400B

Early Warning Software ET-SWA100*

Replacement Filter Unit ET-RFV500

Wireless module

AJ-WM50*

*1 When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, Only certain commands can be received for external control using the serial terminal.

*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards. *3 Indicated average light-output value of all shipper products. *4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [2], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *5 Usage environment affects the duration of ﬁlter. *6 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only *7 With legs at shortest position. *8 The projector cannot be used at an altitude of 2 700 m (8 858') or higher above sea level. In the following operating environment, the light output may decrease to protect the projector. ・When the projector is operated at an altitude below 700 m (2 297') and the ambient temperature exceeds 36°C (97°F) ・When the projector is operated at an altitude between 700 m (2 297') and 1 400 m (4 593') exclusive and the ambient temperature exceeds 34°C (93°F) ・When the projector is operated at an altitude between 1 400 m (4 593') and 2 100 m (6 890') exclusive and the ambient temperature exceeds 32°C (90°F) ・When the projector is operated at an altitude between 2 100 m (6 890') and 2 700 m (8 858') exclusive and the ambient temperature exceeds 30°C (86°F) *9 Average value. Weight varies for each product. *10 Part number sufﬁx may differ depending on the license type. *11 In this document, the sufﬁxes at the end of the model numbers are omitted.

As of March 2019 3/10

VMZ40G_STZ_02_08/03/2019

+ 7 hidden pages