As of October 2017. Specifications and appearance are subject to change without notice.
SFL17M062Z
1/15
LCD Projectors
PT-MZ670/MZ670L
Specications
Main unit
Power supply
Power consumption
1
*
BTU value
LCDpanel
Panel size
Display method
Drive method
Pixels
LensPT-MZ670
PT-MZ670LOptional powered zoom/focus lenses and xed-focus lens
Light source
Illumination life of setVaries depending on operation mode setting.
Projection size
Colors
Light output *
1
Center-to-corner uniformity
Contrast ratio*
1
Resolution
Scanning frequencyRGB
BPR (YCBCR )
YP
Video
HDMI/DIGITAL LINK
AC 100-240 V, 50/60 Hz
525W
(during standby)
Approx. 0.5 W (When [STANDBY MODE] is set to [ECO])
Approx. 22 W (When [STANDBY MODE] is set to [NORMAL])
Approx. 47 W(When [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON],
maximum audio is output, and USB memory is inserted in the
<VIEWER/PAIRING> terminal)
Approx. 115 W(When [QUICK STARTUP] is set to [ON], [IN STANDBY MODE]
in [AUDIO SETTING] is set to [ON], maximum audio is output, and the power
is supplied from the <DC OUT> terminal)
Max 1,792BTU
19.3 mm (0.76 inches) diagonal (16:10 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
Active matrix method
2,304,000 (1920 × 1200) × 3, total of 6,912,000 pixels
Powered zoom (1.6×), focus lenses, F 1.7–2.3, f 26.8– 45.5 mm
Throw ratio 1.6–2.8:1
Laser Diode Laser class 1(Class3R for US models)
20,000 hours at half luminance
* IEC62087: 2008 Broadcast contents, Dynamic contrast [2],
Temperature: 30°C (86F), Under conditions of 0.15 mg/m
of particulate matter
1.02–10.16 m (40– 400 inches) diagonally, 16:10 aspect ratio
Full color (16,777,216 colors)
6,500 lumens (Input signals: PC, Operating mode: Normal, Dynamic mode)
90%
3,000,000:1(all white/all black)(Dynamic Contrast 1 or 2)
Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
•Dot clock frequency: 25 MHz to 162 MHz
3
As of October 20172/15
SFL17M062Z
LCD Projectors
PT-MZ670/MZ670L
Keystone correction range
3
Projection
Lens
Model No.
Standard
zoom lens/
ET-ELS20*
ET-ELW21
ET-ELW22
ET-ELW20
ET-ELT20
ET-ELT21
Only [KEYSTONE] used*
Vertical
Throw
keystone
ratio
correction
angle α (°)
1.6-2.8± 20± 150.91.80.51.0
0.8
0.8-1.0
1.2-1.7
2.7-4.5
4.4-7.1
Horizontal
keystone
correction
angle β (°)
± 25± 30
± 22
± 22
± 25
± 25
± 25
[KEYSTONE] and [CURVED] used together Only [CURVED] used
Vertical
Horizontal
± 15
± 15
± 30
± 30
± 30
keystone
correction
angle α (°)
± 8
± 8
± 20
± 20
± 20
keystone
correction
angle β (°)
± 8
± 8
± 15
± 15
± 15
Min. value
of R2/L2
1.7
1.7
1.2
0.6
0.4
Min. value
of R3/L3
4.3
4.3
3.1
1.1
0.7
Min. value
of R2/L2
1.0
1.0
0.7
0.3
0.2
* Available only in the US, Canada and Europe.
[VERTICAL KEYSTONE] (viewed from the side)[HORIZONTAL KEYSTONE] (viewed from above)
Screen
Screen
Projection distance
Arc radius
Screen
Vertical arc correction (viewed from the side)Horizontal arc correction (viewed from above)
Projection distance
Arc radius
Screen
Min. value
of R3/L3
2.6
2.6
1.8
0.6
0.4
Optical axis shift
Installation
Speaker
Maximum usable volume output
Terminals
HDMI 1 INHDMI 19 pin, HDCP and Deep color compatible
HDMI 2 INHDMI 19 pin, HDCP and Deep color compatible
RGB 1IN
RGB 2IN
MONITOR OUT
VIDEO IN
AUDIO IN 1
AUDIO IN 2
AUDIO IN 3
VARIABLE AUDIO OUT
SERIAL IN
REMOTE 1
REMOTE 2
LAN
DIGITAL LINK / LAN
VIEWER / PAIRING
DC OUT
Power cord length
Cabinet materials
Arc center
Screen
Projection distance
Arc radius
Arc center
Screen
Projection distance
Arc radius
Vertical ±67%, Horizontal ±35% (Supplied lens/ET-ELS20/ET-ELW 20/
ET-ELT20/ET-ELT21)
Vertical ±60%, Horizontal ±30% (ET-ELW22)
NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.
Ceiling/desk/AUTO, front/rear, 360 degree free installation
4.0 cm round-type x 1
10 W (monaural)
Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
BNC (female) x 5, RGB/Y P
D-Sub 15 p (female) x 1, RGB/Y P
D-Sub 15 p (female) x 1, RGB/Y P
B/PR (CB/CR)
B/PR (CB/CR)
/PR (CB/CR)
B
Pin jack x 1
M3 stereo jack x 1(L-R)
M3 stereo jack x 1(L-R)
Pin jack x 2(L-R)
M3 jack, 0 V[rms] to 2.0 V[rms] variable, output imedance 2.2 k ohms and less
D-sub 9 pin, RS-232C compliant, for computer control use
D-Sub 9 p (female) x 1, for external control (parallel)
M3 jack x 1(L-R) for link control (for wired remote control)
RJ-45 x 1 for network connection, 10/100Base-TX, compliant with PJLink™(Class 2)
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™(Class 2), Deep Color, HDCP
USB type-A × 1
USB type-A × 1(DC 5V, 2A(Max) )
3.0m(9ft 10in)
Molded plastic
As of October 20173/15
SFL17M062Z
LCD Projectors
PT-MZ670/MZ670L
Dimensions (W ×H×D)
5
Weight*
Noise level*
Operating environment
Remote control unit
Power supply
Operation range
Dimensions (W × H × D)
Weight
Compliance standardsIEEE802.11a/b/g/n
Wireless LAN*
Transmission method DSSS, OFDM
Modulation method DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO
Transmission speed IEEE802.11b Maximum 11 Mbps
IEEE802.11g/a Maximum 54 Mbps
IEEE802.11n Maximum 300 Mbps
Communication distance Approx. 30 m (98'5") (depending on the operating environment)
The projector cannot be used at an altitude of 2,700 m (8,858') or higher
above sea level.
The light output may decrease to protect the projector when the operating
environment temperature exceeds 36 °C (96.8 °F).
20% to 80% (no condensation)
DC 3 V (AAA/R03/LR03 battery × 2)
Approx. 30 m (98'5") (when operated directly in front of signal receiver)
48 x 145 x 27 mm (1-7/8" x 5-23/32" x 1/16")
Approx. 102g (3.60 ozs.) (including batteries)
IEEE802.11b/g/n: 2.412 GHz - 2.462 GH z (Channels 1 to 11)
IEEE802.11b/g/n: 2.412 GHz - 2.462 GHz (Channels 1 to 11)
IEEE802.11b/g/n: 2.412 GHz - 2.472 GH z (Channels 1 to 13)
Multi Monitoring and Control Software
Logo Transfer Software
Wireless PJ (for iOS/Android)
Smart Projector Control (for iOS/Android)
Wireless remote control unit (× 1)
Power cord (3.0m x 1) (× 2 for UK and Asia)
CD-ROM (Operating Instructions × 1)
Batteries for remote control (R03/AAA type × 2)
Power cord holder (× 1)
Instruction manual (Basic guide)
Application guide
LCD Projectors
PT-MZ670/MZ670L
Optional accessories
Ceiling Mount Bracket for High ceilings ET-PKD120H
Ceiling Mount Bracket for Low ceilings ET-PKD120S
Ceiling Mount Bracket
Projector Mount Bracket
ET-PKE301B*
7
Wireless Module Unit ET-WM300
Replacement Filter Unit ET-RFM100
Digital Interface Box ET-YFB100G
DIGITAL LINK switcher ET-YFB200G
Easy Wireless Stick ET-UW100 *The availability of ET-UW100 varies depending on the country.
Early Warning Software ET-SWA100 series*
8
Fixed-focus lens ET-ELW21
Zoom lens ET-ELW22
Zoom lens ET-ELW20
Zoom lens ET-ELS20 *Available with US, Canada and Europe area only
Zoom lens ET-ELT20
Zoom lens ET-ELT21
Weights and dimensions shown are approximate. Specications subject to change without notice.
*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) for 480i(525i) and 576i(625i)
*3 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
*4 When adjustable feet shortened.
*5 Average value. May differ depending on models.
*6 Can be used when the ET-WM300 (option) is installed.
*7 When the projector is mounted to the existing Ceiling Mount Bracket (in combination with the Model No.: ET-PKD120H (for High Ceilings) or
ET-PKD120S (for Low Ceilings), and the Model No.: ET-PKE300B (Projector Mount Bracket)), it is necessary to replace the drop-prevention
wire rope with the one corresponding to this projector. Consult your dealer. Drop-prevention set (service model no.: DPPW1004ZA/X1)
*8 The sufx of the Model No. differs according to the license type.
As of October 20175/15
SFL17M062Z
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.