PT-MZ670 Series
LCD Projectors
PT-MZ670
PT-MZ570
PT-MW630
PT-MW530
BRILLIANT. QUIET. EFFICIENT. SMOOTH.
YOU NAILED IT!
YOU NAILED IT!
/ PT-MZ670L
/ PT-MZ570L
/ PT-MW630L
/ PT-MW530L
Brilliant Picture Quality
Vivid Images in Bright Environments
SOLID SHINE Laser
phosphor drive with
advance d 3LCD optical
engine projects bright,
vivid, and detailed pictures
even in rooms with high
levels of artificial light.
Text is reproduced clearly
and legibly, while graphics
and video retain excellent
color saturation and high
contrast.
Optical Block of MZ Series
Phosphor Wheel
Mirror
Dichroic
Mirror
Dichroic
Mirror
Mirror
Mirror
Green
Blue Laser
LCD Panel
Blue
LCD Panel
Red
Lens
Prism
Mirror
Dynamic Contrast of 3,000,000:1*2 for Natural
Image Expression
Precision laser power output modulation achieves high contrast with
low power consumption, enabling superior expression of light and dark
scenes for a natural, comfortable viewing experience. The PT-MZ670
Series features high 3,000,000:1*
2
dynamic contrast.
Daylight View Basic Optimizes Pictures in
Bright Spaces
Daylight View Basic delivers clear and sharp images by enhancing detail,
particularly in dark areas of the image, that are difficult to see in brightly lit
rooms. A sensor
measures ambient light
while Daylight View
Basic adjusts halftone
color and brightness to
suit surrounding
illumination.
Conventional Projector Daylight View Basic
Detail Clarity Processor 4 Provides Pin-Sharp Insight
Proprietary circuitry analyzes individual video frames to clarify areas of
each image containing fine details. Algorithms pull information from four
frequency bands of the signal, sharpening outlines, correcting contours,
and reducing ringing noise for a vastly superior picture.
Conventional projector
Detail Clarity Processor 4
Color Adjustment Function
Color Adjustme nt makes it easy to correct slight variations in the color
reproduction range of individual units set up for multiple projection,
particularly those in side-by-side configuration. Correction is performed
on 3 or 7 colors.
Unit 1 Unit 2
Variation
in Color Level
After Color
Adjustment
Note: Graphic is simulated.
Low Maintenance with ECO Functions
No Light-Source Replacement for 20,000 Hours*
3
Laser light-source lifespan is ex tended to 20,000 hours*3, cutting
running costs, labor, and wastage in comparison to lamp-based
projectors. By reducing use of consumable par ts, organizations can
also streamline spare-part inventories.
ECO Management System with Intelligent
Light-Source Control
Energy efficiency is achieved by automatically reducing light-source
output power in dim rooms, and by transitioning to a low-power mode
when no signal is detected.
Bright Room Dark Room
*2 With image mode set to "Dynamic” and Dynamic Contrast set to 1 or 2. *3 Around this time, original light source brightness will have decreased by approximately 50 %. IEC62087: 2008
Broadcast contents, Dynamic contrast [2], Under conditions of 0.15 mg/m
3
of particulate matter. Estimated maintenance time varies depending on environment. *5 Please follow the procedures listed in the operating instructions when washing filter with
0.15 mg/m
water. Replacement is recommended after filter has been washed and reused twice, or if filter is not sufficiently clean after washing.
3
of particulate matter. Estimated maintenance time varies depending on environment. *4 Under conditions of
Dust-Resistant Cabinet with One-Way Airflow Design
Dust-resistant cabinet has an unobstructed one-way airflow with
improved hermetic sealing around the filter module and air-intake duct.
Better lens-assembly hermeticit y reduces dust intrusion and extends
picture brightness.
Reusable Eco Filter Replacement Extended to
20,000 Hours*
Eco Filter includes a Micro Cut Filter that collects minute dust particles
with an electrostatic effect. Together with the dust-resistant projector
cabinet, Eco Filter enables
long-term use in dusty
conditions with less downtime.
Replacement is at about 20,000
4
hours*
, and the filter can be
washed and reused*
4
5
.