Panasonic PT-LRW35 User Manual

PT-LRZ35 Series

Revolutionary RGB LED Projectors Create Vibrant

1-Chip DLP™ Projectors

PT-LRZ35
PT-LRW35

High-Color Images for Teams in Collaborative Spaces

Main Features

01

RGB LED light engine employs discrete LEDs for each
color channel to prevent feasible breakup and widen the
gamut for deep, dynamic color reproduction. High-visibility
images are also free from the rainbow effect.

02

Handy 1.3 x zoom lens with Vertical Lens-Shift
(up to +52 %, +42 %)*1 supports flexible projector
placement. Dual CEC-ready HDMI® inputs and USB-DC
outlet to power streaming devices*2 keep you connected.

Brilliantly Vivid Images
Resist Color Breakup

Flexible Installation and
Connectivity for Teams

03

Stress-free Reliability and
Lasting Picture Quality

Wheel-less design paves the way for improved hermetic
sealing, with the dust-resistant DMD block enabling
implementation of filterless cooling for high image quality
and very low maintenance over 20,000 hours*3 of operation.

*1 PT-LRZ35: (+50 %, +40 %), PT-LRW35: (+52 %, +42 %). *2 Streaming device sold separately. Panasonic cannot guarantee compatibility with third-party devices. *3 At about 20,000 hours, Panasonic recommends cleaning or checkup at point of purchase. Light-source lifetime may be
reduced depending on environmental conditions. Replacement of parts other than the light-source may be required in a shorter period. At 20,000 hours, brightness will have decreased to approximately 50 % of its original level. *4 Measurement, measuring conditions, and method of notation all
comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.

PT-LRZ35 Series

Light Output
Resolution

PT-LRZ35 PT-LRW35

WUXGA WXGA

3,500 lm

*4

1-Chip DLP™ Projectors

PT-LRZ35 Series

Brilliant Color Performance in
Small Spaces

Discrete LEDs for each R/G/B channel reproduce an
expanded color gamut with deep, uniform saturation.
Viewers sensitive to the rainbow effect can now enjoy a
high-resolution DLP™ experience without distraction as
the wheel-less design suppresses the phenomenon.
Unleash dynamic, color-rich images to match the

High Performance, Low Maintenance,
Long Life

Wheel-less design with discrete LED heat-sinks boosts
cooling efficiency while improvements to the hermetic
DMD-block sealing structure resist dust intrusion and
eliminate need of an air filter, reducing maintenance
and preserving image quality over 20,000 hours*2 of
stress-free operation.

boldness of your vision.

Convenient CEC-Compliant HDMI®
Inputs and USB-DC Outlet

HDMI-CEC terminals enable one-touch projector start-up
and playback from standby via the CEC-compatible
component. USB-DC outlet can power a media streaming
device, allowing members of your group to beam content
wirelessly from their mobile devices*1.

*1 Requires a compatible network streaming device. Panasonic cannot guarantee compatibility with third-party devices. *2 At about 20,000 hours, Panasonic recommends cleaning or checkup at point of purchase. Light-source lifetime may be reduced depending on environmental conditions.
Replacement of parts other than the light-source may be required in a shorter period. At 20,000 hours, brightness will have decreased to approximately 50 % of its original level. *3 PT-LRZ35: (+50 %, +40 %), PT-LRW35: (+52 %, +42 %). *4 35 dB in NORMAL Mode. *5 90-day free trial of
Early Warning Functions is enabled upon installation of free Multi Monitoring & Control Software Ver. 2.0 or later. Purchase a license and activate at PASS when trial period expires to continue using Early Warning functions. Visit panasonic.net/cns/projector/products/mmcs/ for more details.
*6 DLP® Link™ technology synchronizes 3D video playback with supported glasses (sold separately) and also requires compatible 3D video content. The function is activated/disabled via the projector OSD menu.

Swift Setup with 1.3x Zoom Lens and
Easy Image Adjustment

A 1.3x zoom lens, vertical lens-shift function (up to +52 %,
+42 %)*3 and vertical keystone correction (±30 °) bring
more freedom and less image distortion for desktop
projection setups while 2-axis 360 ° installation expands
creative signage possibilities.

Other Features

• Low-noise operation of just 24 dB*4
in Quiet Mode

• Quick On/Quick Off for instant
image display and no projector
cooldown

• Built-in 10 W speaker, mic input,
and variable audio output

• Supports Closed Captions (CC)
for broadcast content

• Multi-Monitoring & Control
Software with optional Early

Warning Functions

• Supports Crestron Connected™,
AMX, and PJ Link

• 3D-ready with DLP

technology (requires compatible
glasses)

*5

™

control solutions

®

™*6

Link

Specifications

Model

Projec tor type
DLP™ chip

Light source
Light output*

Time unti l light output d eclines to 50 %*
Resolution
Contrast ratio*

Screen size [diagonal]
Center-to-corner zone ratio*
Lens
Lens shift (From the o rigin point of the len s mounter)

Keystone correction range
Installation
Terminals

Power supply
Power consumption
Built-in speaker
Operation noise*
Dimensio ns (W x H x D)

Weight*
Operating environment
Applicable software

*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast
contents, under conditions with 30 °C (86 °F), 1,400 m above sea level, and 0.15mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 With legs at shortest position. *4 Average value. May differ depending on the actual unit.
*5 Note that the projector cannot be used at altitudes exceeding 4,200 m (13,780 ft) above sea level. 4,200 m (13,780 ft) above sea level is the maximum elevation at which performance can be guaranteed. In the following operating environments, light output may be reduced to protect
the projector: when the projector is used at altitudes below 1,400 m (4,593 ft) and ambient temperature exceeds 40 °C (104 °F); when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature exceeds 35 °C (95 °F); and
when the projector is used at altitudes between 2,700 m (8,858 ft) and 4,200 m (13,780 ft) exclusive and ambient temperature exceeds 30 °C (86 °F).

Panel size
Display method
Number of pixels

1

1

1

HDMI I N 1/HDMI I N 2
COMP UTER 1 IN
COMPUTER 2 IN
COMPUTER OUT
VIDEO IN
AUDI O 1 IN/AUDIO 2 I N
VARIABLE AUDIO OUT

SERIAL IN
LAN
Micro US B
DC OUT

1

4

PT-LRZ35 PT- LRW 35

1-Ch ip DLP™ projector

17.0 mm (0.67 in) diagona l, 16:10 aspect ratio

DLP™ chip x 1, DLP™ projection system

2,304, 000 (1920 x 1200 p ixels)

Light Emitting Diode

3,500 l m

2

20,000 hours
1920 x 1200 pixe ls

30,00 0:1 (When [Lig ht Power] is set to [N ormal] and [P icture Mode] is set t o [Dynamic] )

1.02 –7.62 m (40 –300 in), 16:10 aspect r atio

90 %

1.3x manual zo om (throw rati o: 1.28–1.69 :1)

Vertic al: +50 %, +40 %

Vertic al: ±30 °

Ceiling/floor, front/rear, 2-axis 360-degree installation

HDMI 19 -pin x 2 (HDC P and Deep Color com patible), CEC supp orted

D-sub 15-p in (female) x 1 (RGB /YPBP R/YCBC R)

D-sub 15-p in (female) x 1 (RGB /YPBP R/YCBC R)

D-sub 15-p in (female) x 1 (RGB /YPBP R/YCBC R)

Pin jack x 1

M3 stereo m ini-jack x 2

M3 stereo m ini-jack x 1

D-sub 9 -pin (female) x 1 fo r external con trol (RS-232 C compliant)

RJ-4 5 x 1 for network con trol, 10Base-T, 100B ase-T, compatible wit h PJ Link™ (Class 1)

1 (for ser vice use)

USB Co nnector (Type A ) x 1 (for power supp ly, DC 5 V/2 A)

AC 100– 240 V, 50/6 0 Hz

NORM AL: 420 W, ECO: 25 5 W, QUIET: 196 W

10 W monaural

NORMAL: 35 dB, ECO: 2 7 dB, QUIET: 24 dB

375 x 124*3 x 314 mm (14 3/4˝ x 4 7/8˝ *3 x 12 3/8˝ ) (including protru ding parts)

Approx . 6.7 kg (14.8 lbs)

Operati ng temperature : 0–40 °C ( 32–104 °F)*5, operati ng humidity: 2 0–80 % (no c ondensation)

Multi Mo nitoring & Cont rol Software, E arly Warning Sof tware

16.5 mm (0.65 i n) diagonal, 16:10 aspect rat io

1,024,000 (128 0 x 800 pixels)

1280 x 800 pi xels

1.3x manual zo om (throw rati o: 1.35–1.77:1)

Vertic al: +52 %, +42 %

Optional Accessories

• Ceiling Mount Bracket

ET-PKL100H* (for high ceiling) / ET-PKL100S* (for low ceiling)

* ET-PKL100H/ET-PKL100S is used in combination with the ET-PKV400B (sold separately).

• Attachment for Ceiling Mount Bracket

ET-PKV400B

• Early Warning Software

ET-SWA100 Series

Note: Part number suffix may differ depending on the license type.
* Multi Monitoring & Control Software Ver. 2.0 or later is required. Please download from the following website:
https://panasonic.net/cns/projector/download/application/

Weights and dimensions shown are approximate. Specifications and appearance are subject to change
without notice. Product availability may vary by country or region. This product may be subject to export
control regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas
Instruments. DLP Link is a trademark of Texas Instruments. Trademark PJLink is a trademark applied for
trademark rights in Japan, the United States of America and other countries and areas. The terms HDMI and
HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other countries. All other trademarks are the
property of their respective trademark owners. © 2020 Panasonic Corporation. All rights reserved.

For more information about Panasonic projectors, please visit:

Projector Global Website –
Facebook – www.facebook.com/panasonicprojectoranddisplay
YouTube – www.youtube.com/user/PanasonicProjector

All information included here is valid as of July 2020.

panasonic.net/cns/projector

LRZ35series_G1 Printed in Japan.