Panasonic PT-F100NTEA, PT-F100EA User Manual
Long-Lasting
Brightness
PT-F100NTEA
PT-F100EA
LCD Projectors
With their outstanding flexibility,
PT-F100 series projectors make
ideal replacements for existing
ceiling-mounted systems. They
require little maintenance after
installation, so total cost of
ownership is low.
A Bright Choice for
New Installations and
Replacement Use
Advanced Technologies that Maintain High
Brightness Over a Longer Service Life
Auto Rolling Filter (ARF) and Anti-Dust Design
A Micro Cut Filter, a high-efficiency electrostatic filter, with superior dust-collecting performance combines with Panasonic’s original
Auto Rolling Filter and anti-dust design to minimise brightness
loss due to dust accumulation. The Auto Rolling Filter periodically winds the used section into the casing so that a fresh
section of filter is exposed. Thus, peak performance is maintained. In developing the anti-dust design, Panasonic totally reengineered the airflow path, from intake to exhaust, to create a
cabinet that hermetically seals off the projector interior. This
design and the Auto Rolling Filter team up to keep the air
inside the projector dust-free at all times.
ARF unit
ARF unit
Micro Cut Filter
A high-efficiency electrostatic filter in the air intake section
traps dust particles that are 1 microns* or larger. By capturing approximately 7 times as much dust as our previous
filters, it guards against optical blocks and reduces the
penetration of dust into the interior to provide stable operation by preventing drops in brightness.
Size of particles
1
100
0.5
0.05
0.01
(micrometer)
10
Dust
1
Dead
mite
Pollen
25–50 µm
Mould
2.5–20 µm
Bacteria
Virus
up t o 0.25 µm
Loading...