Panasonic PT-F100NTE User Manual

Click on a desired document name on the displayed list.

Double-click [Index.pdf] in the CD or DVD drive.

The network adaptor selection window appears.

[WMmac] appears on the desktop.

Network Function Quick Guide

(PT-F100NTU/PT-F100NTE/PT-F100NTEA) (PT-FW100NTU/PT-FW100NTE/PT-FW100NTEA)

TQDJ19075 (En) M0507-1067

OS: Mac OS X v10.4

CPU: 800 MHz PowerPC G4 or faster, or 1.8 GHz Intel Core processor or faster

RAM: 256 MB or more (512 MB or more is recommended)

Empty hard disk capacity: 60 MB or more

Web browser: Safari 2.0 or newer

Hardware conditions: CD or DVD drive

Wireless or wired LAN function

Wireless LAN: An 802.11 b/g built-in wireless LAN adaptor must be running properly.

However, some 802.11 b/g wireless LAN may not allow connection to 802.11 g projector.

Wired LAN: A built-in LAN terminal (10BASE-T, 100BASE-TX or 1000BASE-T) must be

running properly. A LAN cable to connect must be compatible with category 5 or above (category 5e or above when using 1000BASE-T). Consult your system administrator when selecting a straight or crossover type.

■ System requirements

• Wireless Manager mobile edition (henceforth abbreviated to “ME”) 4.5 is used to send screen images from a computer to the projector via a wireless or wired LAN.

• Before installation, see “System requirements” at the upper right of this guide.

• Shut down all software currently active on your computer. Otherwise, installation may not be possible.

• Administrator authority is required for installation.

Set the supplied CD-ROM in the CD or DVD drive.

Launch Wireless Manager ME 4.5.

Double-click [WMmac4.5.dmg] in the CD or DVD drive.

Set the supplied CD-ROM in the CD or DVD drive.

Select the adaptor from the list and click [OK].

If the confirmation dialog window appears, click [YES].

If the user name setting window appears, set the icon and user name, and click [OK].

In [Network], select the same network number as is displayed in the [WIRELESS LAN] menu of the projector to connect.

Select the projector to connect and click [OK].

Click [ ] in the menu bar.

Click [Live Mode] in the menu.

• The installer starts up.

• Follow the instructions on the screen to install this software.

• If the name and password setting window appears, enter those of the administrator.

• Install Wireless Manager ME 4.5 in the [Applications] folder (./Applications).

Double-click [Wireless Manager.pkg].

Using network functions

The projectors illustrated as examples are PT-F100NTU.

• Operation is not guaranteed for all computers that meet the above conditions.

• Operation is not guaranteed for all wireless LAN cards and built-in wireless LAN adaptors.

• It is forbidden to take the projector outside the country or region where you purchased it, so use it only in the said country or region. Also, note that depending on countries or regions there are restrictions on the channels and frequencies at which you can use the wireless LAN.

• You must agree to the “Software Licensing Agreement” to use the supplied software. Please read it carefully when it is displayed during installation.

Installing the software

The “Network Function Edition for Macintosh” document is stored in the supplied CDROM in PDF file form.

Viewing the operating instructions

■ Easy wireless set up

■ Wired LAN connection

For details of usage, see “Network Function Edition for Macintosh” in the supplied CD-ROM.

Used for normal presentations.

■ Other examples of usage

See “Network Function Edition for Macintosh” in the supplied CD-ROM.

Network settings of the projector and the computer are required. See “Network Function Edition for Macintosh” in the supplied CD-ROM.

Macintosh

10BASE-T/100BASE-TX/1000BASE-T

Hub

LAN cable (straight, 100 m or less) LAN cable (straight, 100 m or less)

Access point (AP)

LAN

•

Macintosh is a registered trademark of Apple Inc. in the USA and other countries.

•

PowerPC is a registered trademark of IBM Corporation.

•

Intel Core is a registered trademark of Intel Corporation in the USA and other countries.

URL : http://panasonic.co.jp/pavc/global/projector/

ENGLISH

(PT-F200NTU/PT-F200NTE/PT-F200NTEA) (PT-FW100NTU/PT-FW100NTE/PT-FW100NTEA)

System requirements ■

OS: Mac OS X v10.4

CPU: 800 MHz PowerPC G4 or faster, or 1.8 GHz Intel Core processor or faster RAM: 256 MB or more (512 MB or more is recommended)

Empty hard disk capacity: 60 MB or more

Web browser: Safari 2.0 or newer

Hardware conditions:

Wireless LAN: An 802.11 b/g built-in wireless LAN adaptor must be running properly.

Wired LAN: A built-in LAN terminal (10BASE-T, 100BASE-TX or 1000BASE-T) must be

*1 However, the latest information only for Intel Core2 Duo processor MacBook and MacBook

Pro users is available on the Panasonic web page at http://panasonic.co.jp/pavc/global/projector.

Operation is not guaranteed for all computers that meet the above conditions.• Operation is not guaranteed for all wireless LAN cards and built-in wireless LAN adaptors.• It is forbidden to take the projector outside the country or region where you purchased it, so • use it only in the said country or region. Also, note that depending on countries or regions there are restrictions on the channels and frequencies at which you can use the wireless LAN. You must agree to the “Software Licensing Agreement” to use the supplied software. Please • read it carefully when it is displayed during installation.

Mac OS X v10.5*

CD or DVD drive Wireless or wired LAN function

However, some 802.11 b/g wireless LAN may not allow connection to

802.11 g projector.

running properly.

A LAN cable to connect must be compatible with category 5 or above (category 5e or above when using 1000BASE-T). Consult your system administrator when selecting a straight or crossover type.

TQDJ19101 (En) S1207-0A

PT-F200NTU