Panasonic PT-EZ770Z User Manual

PEC

ILE

Product Number :

Product Name :

PT-EZ770Z/EZ770ZL

LCD Projectors

As of August 2014. Specifications and appearance are subject to change without notice.

SFL14M013

1/17

LCD Projectors

Specifications

Main unit

Power supply Power consumption

Optical system LCD panel Panel size

Display method Pixels Pixel configuration

Lens

Lamp Screen size

Brightness* Center-to-corner uniformity* Contrast* Resolution Scanning frequency DisplayPort/HDMI/DVI-D

Optical axis shift

Keystone correction range

Installation Built-in speakerSize

RGB

(YCBCR)

BPR

Video/YC

Output power

PT-EZ770Z/EZ770ZL

100–240 V AC, 50/60 Hz 590 W (0.3 W with s

et to NORMAL,37 W with in STANDBY MODE of Audio Setting set to on.)

STANDBYMODE

set to

Dichroic mirror separation/prism synthesis system

19.0 mm (0.75 inches) diagonal (16:10 aspect ratio) Transparent LCD panel (× 3, R/G/B) 2,304,000 (1,920 × 1,200) × 3, total of 6,912,000 pixels Stripe Powered zoom/focus lens (1.7– 2.8:1), F 1.7– 2.3, f 26.9–45.4 mm Optional powered zoom/focus lenses and fixed-focus lens 400 W UHM lamp

1.02–10.16 m (40– 400 inches), 16:10 aspect ratio *1.52 – 10.16 m (60 – 400 inches) with the ET-ELW22 (16:10 aspect ratio) 6,500 lumens (

LAMP POWER: AUTO/NORMAL , Dynamic mode, Standard lens)

90% 5,000:1 (full on / full off,

LAMP POWER: AUTO, Iris on, Dynamic mode)

1,920 × 1,200 pixels fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 25 MHz–162 MHz (VGA: 640 × 480 pixels to WUXGA: 1,920 × 1,200 pixels, VESA CVT-RB compliant, compatible with HDCP) f

: 15–100 kHz, fV: 24–120 Hz, dot clock: up to 162 MHz

15.73 kHz; fV59.94 Hz,

480i (525i): 576i (625i): 480p (525p): 576p (625p): 720 (750)/60p: 720 (750)/50p: 1080 (1125)/60i: 1080 (1125)/50i: 1080 (1125)/25p: 1080 (1125)/24p: 1080 (1125)/24sF: 1080 (1125)/30p: 1080 (1125)/60p: 1080 (1125)/50p:

: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

H: 15.63 kHz, fV : 50 Hz [PAL/PAL-N/SECAM]

fH15.63 kHz; f

31.47 kHz; f

H 31.25 kHz; fV 50 Hz,

60 Hz,

59.94 Hz,

fH45.00 kHz; fV60 Hz, fH

37.50 kHz; fV50 Hz,

33.75 kHz; fV60 Hz,

28.13 kHz; fV50 Hz,

f fH 28.13 kHz; fV 25 Hz, f

27.00 kHz; fV24 Hz,

fH27.00 kHz; fV48 Hz,

33.75 kHz; fV30 Hz,

f f

67.50 kHz; fV60 Hz,

fH56.25 kHz; fV50 Hz

Vertical: ±60%* (powered), horizontal: ±10% (powered) *±50% with the ET-ELW22.

NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.

Vertical: ±40° (with vertical correction only) Horizontal: ±30° (with horizontal correction only) Ceiling/floor, front/rear

3.7 cm (1-15/32 inches) (round) × 1 10 W (monaural)

, 10 W with STANDBY MODE

ECO

As of August 2014 2/17

SFL14M013

LCD Projectors

PT-EZ770Z/EZ770ZL

Terminals

DisplayPort IN

DP-20P × 1, HDCP compatible

480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p VGA (640 × 400) – WUXGA*

(1,920 × 1,200) Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)

HDMI IN

HDMI 19-pin × 1, Deep Color, HDCP compatible

480i(525i)

, 576i(625i)

, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p VGA (640 × 400) – WUXGA*

(1,920 × 1,200) Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)

DVI-D IN

DVI-D 24-pin × 1, DVI 1.0 compliant, compatible with HDCP, compati-

ble with single link only 480i(525i)

, 576i(625i)

, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,

RGB1 IN

R, G, B

1080(1125)/50p VGA (640 × 400) – WUXGA*

D-sub HD 15-pin (female) ×1 R: 0.7 Vp-p, 75 ohms;

(1,920 × 1,200)

G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)

B(CB

RGB2 IN

R, G, B

), PR(CR)

Y: 1.0 Vp-p (including sync signal);

B (CB), PR (CR): 0.7 Vp-p, 75 ohms

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

BNC ×5 (RGB/YPBPR/YCBCR×1) R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y, PB

(CB), PR(CR)

S-Video IN VIDEO IN MONITOR OUT

Y: 1.0 Vp-p (including sync signal);

B (CB), PR (CR): 0.7 Vp-p, 75 ohms

Vp-p; C: 0.286 Vp-p, 75 ohms

Y: 1.0 PIN Jack× 1, 1.0 Vp-p, 75 ohms D-sub HD 15-pin (female) ×1 R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)

Y, PB

(CB), PR(CR)

Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms

AUDIO IN

M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more

PIN Jack (L, R) × 2, 0.5 Vrms, input impedance: 22 kilohms or more VARIABLE AUDIO OUT SERIAL IN

M3 (L, R) × 1 (monitor out: 0–2.0 Vrms, variable)

D-sub 9-pin (female) × 1, for external control (RS-232C compliant) REMOTE 1 IN M3 jack × 1 for wired remote control REMOTE 2 IN LAN/DIGITAL LINK

D-sub 9-pin (female) × 1, for external control (parallel)

RJ-45 ×1for network and DIGITAL LINK (video/network/serial control)

connection, 100Base-TX, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 480i(525i)

, 576i(625i)

, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p

VGA (640 × 400) – WUXGA*

(1,920 × 1,200),

dot clock: 25 MHz–162 MHz

NOTE: Compatible with non-interlaced signals only.

As of August 2014 3/17

SFL14M013

LCD Projectors

PT-EZ770Z/EZ770ZL

Power cord length Cabinet materials Dimensions (W × H × D) PT-EZ770Z

PT-EZ770ZL

Weight

PT-EZ770Z PT-EZ770ZL

Operation noise*

Operating temperature Operating humidity

Remote control unit

Power supply Operation range*

Dimensions (W × H × D) Weight

Supplied accessories

3.0 m (9 ft 10 in) Molded plastic 530 × 177*

× 445mm

(20-7/8 × 6-31/32*5× 17-17/32inches) (with supplied lens)

530 × 177*

× 385mm (20-7/8 × 6-31/32 *5× 15-5/32 inches) (without lens) Approx. 10.6 kg (23.4 lbs) (with supplied lens) Approx. 9.8 kg (21.6 lbs) (without lens) 37

LAMP POWER: NORMAL), 31 dB (LAMP POWER: ECO

dB (

29 dB ( 0–45 °C

LAMP POWER: ECO

(32–113 °F)

)

10%–80% (no condensation)

3 V DC (R03/LR03/AAAtypebattery × 2) Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor 48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16 inches) Approx. 102 g (3.6 oz) (including batteries)

Power cord (including power cord holder)(× 1) Wireless/wireled remote control unit (× 1) Batteries for remote control (AAA/R03/LR03 type × 2) Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring

& Control Software) (× 1)

Optional accessories

Fixed-focus lens (0.8:1) Short throw zoom lens ( 0.78-0.98:1 WUXGA /

0.78-0.98:1 WXGA /

0.8-1.0:1 XGA) Zoom lens (1.3–1.7:1) Zoom lens (2.8– 4.6:1) Zoom lens (4.6–7.2:1) Ceiling mount bracket

Bracket assembly

Replacement lamp unit Replacement filter unit

ET-ELW21 ET-ELW22

ET-ELW20 ET-ELT20 ET-ELT21 ET-PKD120H (for high ceilings) ET-PKD120S (for low ceilings) ET-PKE300B (for ET-PKD120H/PKD120S) ET-PKE200B

ET-LAE300 ET-RFE300

Weights and dimensions shown are a pproximate. Specifications and appearance are subject to change without notice.

1 When the standby mode is set to eco, network functions such as power on over the L AN network will not operate, and the serial output termi-

nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.

2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 inter national standards.

3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)

4 WUXGA

5 With

6 Average value. May differ depending on models.

7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between 1,400 m and 2,700 m (4,593 ft to 8,858 ft) above

8 Operation

9 If the ceiling mount bracket of the ET-PKE200H or ET-PKE200S has already been installed, use the projector attachment for the ET-PKE200B.

resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).

legs at shortest position.

sea level. When operating temperature exceeds 40 °C (35 °C at high altitude), lamp power may automatically switch to ECO 2 in order to protect the projector.

range differs depending on environments.

As of August 2014 4/17

SFL14M013

LCD Projectors

Dimensions

385 (15-5/32)

445 (17-17/32)

(2-3/8)

530

(20-7/8)

PT-EZ770Z/EZ770ZL

unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT-EZ770Z.

(3-5/32)

160 (6-5/16)

177 (6-31/32)

(21/32)

Terminals

9 10

234567

11 13 14 15

1 LAN/DIGITAL LINK connector

2 HDMI input

3 MONITOR output

4 RGB1 input

5 RGB2 input

6 BVI-D input

7 Display Port input

8 Video input

9 Audio 1 input

10 Audio 2 input

11 Audio 3 input

12 Remote 1 input

13 Audio output

14 Serial input

15 Remote 2 input

As of August 2014 5/17

SFL14M013

LCD Projectors

Standard setting-up position

Upper edge of projected image

Projected image

Lower edge of projected image

PT-EZ770Z/EZ770ZL

*1 When the lens protrudes to the maximum. A: 50 mm (1-31/32 in) wi th the ET-ELW21

ø60.5

(2-3/8)

(7-15/32)

195190

(7-11/16)

352–432*

443–523*

(13-27/32– 17)*

(17-7/16–20-19/32)*

100

(3-15/16)

95 mm (3-3/4 in) wi th the ET-ELW22

79.5 mm (3-1/8 in) wi th the ET-ELW20 60 mm (2-3/8 in) wi th the supplied lens 84 mm (3-5/16 in) wi th the ET-ELT20 80 mm (3-5/32 in) wi th the ET-ELT21

*2 A djustable in 40 mm (1-9/16 in) steps.

NOTE:

Illustrations show the projector i nstalled using optional ceiling mount bracket ET- PKD120H and bracket a ssembly ET- PKE300B.

This illustration is not drawn to scale.

Projected image

100

(3-15/16)

(7-7/8)

200

100 (3-15/16)

100

(3-15/16)

200

(7-7/8)

unit : mm (inch)

Caution:

• All construction work should be done by a qualified technician.

• When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or drop-

ping, attach the wire between the mounting bracket and the ceiling.

As of August 2014 6/17

SFL14M013

+ 11 hidden pages