![](/html/0a/0ac9/0ac9e64f47e6c2a11fa6b4ca8562d2e87053a7edbcd6a7580df60481355a2dc4/bg2.png)
LCD Projectors
Specifications
Main unit
Power supply
Power consumption
Optical system
LCD panel Panel size
Display method
Pixels
Pixel configuration
Lens
Lamp
Screen size
Brightness*
Center-to-corner uniformity*
Contrast*
Resolution
Scanning frequency DisplayPort/HDMI/DVI-D
Optical axis shift
Keystone correction range
Installation
Built-in speaker Size
2
2
2
RGB
(YCBCR)
YP
BPR
Video/YC
Output power
PT-EX610/EX610L
100–240 V AC, 50/60 Hz
495 W (0.3 W
set to
NORMAL, 37 W with in STANDBY MODE of Audio Setting set to on.)
STANDBYMODE
with
set to
Dichroic mirror separation/prism synthesis system
20.0 mm (0.79 inches) diagonal (4:3 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
786,432 (1,024 ×768) × 3, total of 2,359,296 pixels
Stripe
Powered zoom/focus lens (1.7–2.8:1), F 1.7–2.3, f 26.9 –45.4 mm
Optional powered zoom/focus lenses and fixed-focus lens
335 W UHM lamp
1.02–10.16 m (40–400 inches), 4:3 aspect ratio
6,200 lumens (LAMP POWER: AUTO/NORMAL, Dynamic mode, Standard lens)
90%
5,000:1 (full on / full off,
LAMP POWER: AUTO, Iris on, Dynamic mode)
1,024 × 768 pixels
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 25 MHz–162 MHz (VGA: 640 ×
480 pixels to WUXGA: 1,920 × 1,200 pixels, VESA CVT-RB compliant,
compatible with HDCP)
f
H
: 15–100 kHz, fV: 24–120 Hz, dot clock: up to 162 MHz
480i (525i):
576i (625i):
480p (525p):
576p (625p):
720 (750)/60p:
720 (750)/50p:
1080 (1125)/60i:
1080 (1125)/50i:
1080 (1125)/25p:
1080 (1125)/24p:
1080 (1125)/24sF:
1080 (1125)/30p:
1080 (1125)/60p:
1080 (1125)/50p:
H
: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
f
H: 15.63 kHz, fV : 50 Hz [PAL/PAL-N/SECAM]
f
fH15.73 kHz; fV59.94 Hz,
fH15.63 kHz; fV50 Hz,
fH31.47 kHz; fV59.94 Hz,
H 31.25 kHz; fV 50 Hz,
f
fH45.00 kHz; fV60 Hz,
fH
37.50 kHz; fV50 Hz,
f
33.75 kHz; fV60 Hz,
H
H
28.13 kHz; fV50 Hz,
f
fH 28.13 kHz; fV 25 Hz,
f
27.00 kHz; fV24 Hz,
H
fH27.00 kHz; fV48 Hz,
H
33.75 kHz; fV30 Hz,
f
f
67.50 kHz; fV60 Hz,
H
fH56.25 kHz; fV50 Hz
Vertical: ±50% (powered), horizontal: ±10% (powered)
NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.
Vertical: ±40° (with vertical correction only)
Horizontal: ±30° (with horizontal correction only)
Ceiling/floor, front/rear
3.7 cm (1-15/32 inches) (round) × 1
10 W (monaural)
1
, 10 W with STANDBY MODE
ECO
*
As of March 2014 2/16
SFL13M013
![](/html/0a/0ac9/0ac9e64f47e6c2a11fa6b4ca8562d2e87053a7edbcd6a7580df60481355a2dc4/bg3.png)
LCD Projectors
PT-EX610/EX610L
Terminals
DisplayPort IN
HDMI IN
DVI-D IN
RGB1 IN
R, G, B
B(CB
Y, P
), PR(CR)Y: 1.0 Vp-p (including sync signal);
RGB2 IN
R, G, B
B(CB
Y, P
), PR(CR)
S-Video IN
VIDEO IN
MONITOR OUT
AUDIO IN
VARIABLE AUDIO OUT
SERIAL IN
REMOTE 1 IN
REMOTE 2 IN
LAN/DIGITAL LINK
DP-20P × 1,
HDCP compatible
480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i,
1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF,
1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p
VGA (640 × 400) – WUXGA*4(1,920 × 1,200)
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz,
32 kHz)
HDMI 19-pin × 1, Deep Color, HDCP compatible
480i(525i)
3
*
, 576i(625i)
3
*
, 480p(525p), 576p(625p), 720(750)/60p,
720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p,
1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,
1080(1125)/50p
VGA (640 × 400)–WUXGA
4
*
(1,920 × 1,200)
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz,
32 kHz)
DVI-D 24-pin × 1, DVI 1.0 compliant, compatible with HDCP, compati-
ble with single link only
480i(525i)
3
*
, 576i(625i)
3
*
, 480p(525p), 576p(625p), 720(750)/60p,
720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p,
1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,
1080(1125)/50p
VGA (640 × 400) – WUXGA*
4
(1,920 × 1,200)
D-sub HD 15-pin (female) ×1
R: 0.7 Vp-p, 75 ohms;
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
B (CB), PR (CR): 0.7 Vp-p, 75 ohms
P
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
BNC ×5 (RGB/YPBPR/YCBCR×1)
R: 0.7 Vp-p, 75 ohms;
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y: 1.
0 Vp-p (including sync signal);
B (CB), PR (CR): 0.7 Vp-p, 75 ohms
P
Vp-p; C: 0.286 Vp-p, 75 ohms
Y: 1.0
PIN Jack× 1, 1.0 Vp-p, 75 ohms
D-sub HD 15-pin (female) ×1
R: 0.7 Vp-p, 75 ohms;
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more
M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more
PIN Jack (L, R) × 2, 0.5 Vrms, input impedance: 22 kilohms or more
M3 (L, R) × 1
(monitor out: 0– 2.0 Vrms, variable)
D-sub 9-pin (female) × 1, for external control (RS-232C compliant)
M3 jack × 1 for wired remote control
D-sub 9-pin (female) × 1, for external control (parallel)
RJ-45 ×1for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compliant with PJLink™ (class 1),
Deep Color, compatible with HDCP,
480i(525i)
3
*
, 576i(625i)
3
*
, 480p(525p), 576p(625p), 720(750)/60p,
720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p,
1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,
1080(1125)/50p
4
VGA (640 × 400) – WUXGA*
(1,920 × 1,200),
dot clock: 25 MHz–162 MHz
NOTE: Compatible with non-interlaced signals only.
As of March 2014 3/16
SFL13M013
![](/html/0a/0ac9/0ac9e64f47e6c2a11fa6b4ca8562d2e87053a7edbcd6a7580df60481355a2dc4/bg4.png)
LCD Projectors
PT-EX610/EX610L
Power cord length
Cabinet materials
Dimensions (W × H × D) PT-EX610
PT-EX610L
6
Weight
*
PT-EX610
PT-EX610L
Operation noise*
2
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range*
8
Dimensions (W × H × D)
Weight
Supplied accessories
3.0 m (9 ft 10 in)
Molded plastic
530 × 177*
5
× 445mm
(20-7/8 × 6-31/32*5× 17-17/32inches) (with supplied lens)
5
530 × 177*
× 385mm
(20-7/8 × 6-31/32 *5× 15-5/32 inches) (without lens)
Approx. 10.6 kg (23.4 lbs) (with supplied lens)
Approx. 9.8 kg (21.6 lbs) (without lens)
LAMP POWER: NORMAL),
35 dB (
29 dB (
LAMP POWER: ECO)
0–45 °C
7
*
(32–113 °F)
7
*
10%–80% (no condensation)
3 V DC (R03/LR03/AAAtypebattery × 2)
Approx. 30 m (98 ft 5 in) when operated from directly in front of the
signal receptor
48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16 inches)
Approx. 102 g (3.6 oz) (including batteries)
Power cord (including power cord holder)(× 1)
Wireless/wireled remote control unit (× 1)
Batteries for remote control (AAA/R03/LR03 type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
Optional accessories
Zoom lens (1.3–1.7:1)
Zoom lens (2.8– 4.6:1)
Zoom lens (4.6–7.2:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket
Bracket assembly
Replacement lamp unit
Replacement filter unit
ET-ELW20
ET-ELT20
ET-ELT21
ET-ELW21
ET-PKD120H (for high ceilings)
ET-PKD120S (for low ceilings)
ET-PKE300B (for ET-PKD120H/PKD120S)
ET-PKE200B
9
*
ET-LAE300
ET-RFE300
Weights and dimensions shown are a pproximate. Specifications and appearance are subject to change without notice.
1 When the standby mode is set to eco, network functions such as power on over the L AN network will not operate, and the serial output termi-
*
nal cannot be used. Also, only certain commands can be received for external control using the serial terminal. Only Taiwan model, 0.15 W.
2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 inter national standards.
*
3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
*
4 WUXGA
*
5 With
*
6 Average value. May differ depending on models.
*
7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between 1,400 m and 2,700 m (4,593 ft to 8,858 ft) above
*
8 Operation
*
9 If the ceiling mount bracket of the ET-PKE200H or ET-PKE200S has already been installed, use the projector attachment for the ET-PKE200B.
*
resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
legs at shortest position.
sea level. When operating temperature exceeds 40 °C (35 °C at high altitude), lamp power may automatically switch to ECO in order to protect
the projector.
range differs depending on environments.
As of March 2014 4/16
SFL13M013