Panasonic PT-EW730ZLEJ Datasheet

PEC

SFL13M004

ILE

Product Number :

Product Name :

PT-EW730Z/EW730ZL

LCD Projectors

As of October 2013. Specifications and appearance are subject to change without notice.

1/17

PT-EW730Z/EW730ZL

LCD Projectors

SFL13M004

Specifications

Main unit

Power supply Power consumption

Optical system LCD panel Panel size

Lens

Lamp Screen size Brightness* Center-to-corner uniformity* Contrast* Resolution Scanning frequency DisplayPort/HDMI/DVI-D

Optical axis shift

Keystone correction range

Installation Built-in speakerSize

100–240 V AC, 50/60 Hz 575 W (0.3 W with

STANDBYMODE

set to set to NORMAL, 37 W with in STANDBY MODE of Audio Setting set to on.) Dichroic mirror separation/prism synthesis system

19.0 mm (0.76 inches) diagonal (16:10 aspect ratio)

Display method Pixels Pixel configuration

Transparent LCD panel (× 3, R/G/B) 1,024,000 (1,280 ×800) × 3, total of 3,072,000 pixels Stripe Powered zoom/focus lens (1.7–2.8:1), F 1.7–2.3, f 26.9 –45.4 mm Optional powered zoom/focus lenses and fixed-focus lens 400 W UHM lamp

1.02–10.16 m (40–400 inches), 16:10 aspect ratio

7,000 lumens (

LAMP POWER: AUTO/NORMAL, Dynamic mode, Standard lens)

90% 5,000:1 (full on / full off, 1,280

× 800 pixels

LAMP POWER: AUTO, Iris on, Dynamic mode)

fH: 15–91 kHz, fV: 24–120 Hz, dot clock: 25 MHz–162 MHz (VGA: 640 × 480 pixels to WUXGA: 1,920 × 1,200 pixels, VESA CVT-RB compliant, compatible with HDCP)

RGB

BPR

Video/YC

(YCBCR)

H: 15–91 kHz, fV: 24–120 Hz, dot clock: up to 162 MHz

15.75 kHz; fV60 Hz,

480i (525i): 576i (625i): 480p (525p): 576p (625p): 720 (750)/60p: 720 (750)/50p: 1080 (1125)/60i: 1080 (1125)/50i: 1080 (1125)/25p: 1080 (1125)/24p: 1080 (1125)/24sF: 1080 (1125)/30p: 1080 (1125)/60p: 1080 (1125)/50p:

fH15.63 kHz; fV50 Hz, fH31.50 kHz; fV60 Hz,

H 31.25 kHz; fV 50 Hz,

f fH45.00 kHz; fV60 Hz, fH

37.50 kHz; fV50 Hz,

33.75 kHz; fV60 Hz,

28.13 kHz; fV50 Hz,

f fH 28.13 kHz; fV 25 Hz, f

27.00 kHz; fV24 Hz,

fH27.00 kHz; fV48 Hz,

33.75 kHz; fV30 Hz,

f f

67.50 kHz; fV60 Hz,

fH56.25 kHz; fV50 Hz

fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

H: 15.63 kHz, fV : 50 Hz [PAL/PAL-N/SECAM]

f Vertical: ±60% (powered), horizontal: ±10% (powered)

NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.

Vertical: ±40° (with vertical correction only) Horizontal: ±30° (with horizontal correction only) Ceiling/floor, front/rear

3.7 cm (1-15/32 inches) (round) × 1

Output power

10 W (monaural)

, 10 W with STANDBY MODE

ECO

As of October 2013 2/17

PT-EW730Z/EW730ZL

LCD Projectors

SFL13M004

Terminals

DisplayPort IN

DP-20P × 1,

HDCP compatible 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p VGA (640 × 480) – WUXGA*4(1,920 × 1,200)

Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)

HDMI IN

HDMI 19-pin × 1, Deep Color, HDCP compatible

480i(525i)

, 576i(625i)

, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)

DVI-D IN

DVI-D 24-pin × 1, DVI 1.0 compliant, compatible with HDCP, compati-

ble with single link only 480i(525i)

, 576i(625i)

, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,

RGB1 IN

R, G, B

1080(1125)/50p VGA (640 × 480) – WUXGA*

D-sub HD 15-pin (female) ×1 R: 0.7 Vp-p, 75 ohms;

(1,920 × 1,200)

G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)

Y, P

B(CB

), PR(CR)Y: 1.0 Vp-p (including sync signal);

B (CB), PR (CR): 0.7 Vp-p, 75 ohms

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

RGB2 IN

R, G, B

BNC ×5 (RGB/YPBPR/YCBCR×1) R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

B(CB

Y, P

), PR(CR)

S-Video IN VIDEO IN MONITOR OUT (RGB output)

Y: 1.0 Vp-p (including sync signal);

B (CB), PR (CR): 0.7 Vp-p, 75 ohms

Vp-p; C: 0.286 Vp-p, 75 ohms

Y: 1.0 PIN Jack× 1, 1.0 Vp-p, 75 ohms D-sub HD 15-pin (female) ×1 R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: high impedance, TTL (positive/negative)

AUDIO IN

M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more

PIN Jack (L, R) × 2, 0.5 Vrms, input impedance: 22 kilohms or more VARIABLE AUDIO OUT SERIAL IN

M3 (L, R) × 1 (monitor out: 0–2.0 Vrms, variable

D-sub 9-pin (female) × 1, for external control (RS-232C compliant) REMOTE 1 IN M3 jack × 1 for wired remote control REMOTE 2 IN LAN/DIGITAL LINK

D-sub 9-pin (female) × 1, for external control (parallel)

RJ-45 ×1for network and DIGITAL LINK (video/network/serial control)

connection, 100Base-TX, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 480i(525i)

, 576i(625i)

(1,920 × 1,200),

dot clock: 25 MHz–162 MHz

NOTE: Compatible with non-interlaced signals only.

)

As of October 2013 3/17

PT-EW730Z/EW730ZL

LCD Projectors

SFL13M004

Power cord length Cabinet materials Dimensions (W

Weight

Operation noise*

Operating temperature Operating humidity

Remote control unit

Power supply Operation range*

Dimensions (W × H × D) Weight

Supplied accessories

3.0 m (9 ft 10 in) Molded plastic

× H × D) PT-EW730Z

530 × 177*

× 445mm

(20-7/8 × 6-31/32*5× 17-17/32inches) (with supplied lens)

PT-EW730Z

PT-EW730ZL

530 × 177* (20-7/8 × 6-31/32 *5× 15-5/32 inches) (without lens) Approx. 10.6 kg (23.4 lbs) (with supplied lens) Approx. 9.8 kg (21.6 lbs) (without lens) 37 dB (LAMP POWER: NORMAL), 31 dB (LAMP POWER: 29 dB (

0–45 °C

× 385mm

LAMP POWER: ECO 2)

(32–113 °F)

ECO

1),

10%–80% (no condensation)

3 V DC (R03/LR03/AAAtypebattery × 2)

Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor 48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16 inches) Approx. 102 g (3.6 oz) (including batteries)

Power cord (including power cord holder)(× 1) Wireless/wireled remote control unit (× 1) Batteries for remote control (AAA/R03/LR03 type × 2) Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring

& Control Software) (× 1)

Optional accessories

Zoom lens (1.3–1.7:1) Zoom lens (2.8– 4.6:1) Zoom lens (4.6–7.2:1) Fixed-focus lens (0.8:1) Ceiling mount bracket

Bracket assembly Replacement lamp unit Replacement filter unit

ET-ELW20 ET-ELT20 ET-ELT21 ET-ELW21 ET-PKE200H (for high ceilings) ET-PKE200S (for low ceilings) ET-PKE200B ET-LAE300 ET-RFE300

Weights and dimensions shown are a pproximate. Specifications and appearance are subject to change without notice.

1 When the standby mode is set to eco, network functions such as power on over the L AN network will not operate, and the serial output termi-

nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.

2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 inter national standards.

3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)

4 WUXGA

5 With

6 Average value. May differ depending on models.

7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between 1,400 m and 2,700 m (4,593 ft to 8,858 ft) above

8 Operation

resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).

legs at shortest position.

sea level. When operating temperature exceeds 40 °C (35 °C at high altitude), lamp power may automatically switch to ECO 2 in order to protect the projector.

range differs depending on environments.

As of October 2013 4/17

PT-EW730Z/EW730ZL

LCD Projectors

SFL13M004

Dimensions

385 (15-5/32)

445 (17-17/32)

(2-3/8)

530

(20-7/8)

unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT-EW730Z.

(3-5/32)

160 (6-5/16)

177 (6-31/32)

(21/32)

Terminals

9 10

234567

11 13 14 15

1 LAN/DIGITAL LINK connector

2 HDMI input

3 RGB output

4 RGB1 input

5 RGB2 input

6 BVI-D input

7 Display Port input

8 Video input

9 Audio 1 input

10 Audio 2 input

11 Audio 3 input

12 Remote 1 input

13 Audio output

14 Serial input

15 Remote 2 input

As of October 2013 5/17

PT-EW730Z/EW730ZL

LCD Projectors

SFL13M004

Standard setting-up position

Upper edge of projected image

Projected image

Lower edge of projected image

Projected image

*1 When the lens protrudes to the maximum.

A: 79.5 mm (3-1/8 in) with the ET-ELW20

(33-27/32–

57-15/32)

972–1,572

(38-9/32–61-7/8)

(2-3/8)

120

(4-23/32)

(2-3/8)

(2-1/8)

(7-15/32)

(7-11/16)

860–1,460

195190

60 mm (2-3/8 in) with t he supplied lens 84 mm (3-5/16 in) with the ET-ELT20 80 mm (3-5/32 in) with the ET-ELT21 50 mm (1-31/32 in) with the ET-ELW21

*2 Adjustable in 30 mm (1-3/16 in) steps.

NOTE:

Illustrations show t he projector i nstalled u sing optional ceiling mount bracket ET-PKE200H and bracket assembly ET-PKE200B.

This illustration is not drawn to scale.

(2-3/8)

(4-23/32)

120

60 (2-3/8)

unit : mm (inch)

Caution:

• All construction work should be done by a qualified technician.

• When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or drop-

ping, attach the wire between the mounting bracket and the ceiling.

As of October 2013 6/17

+ 11 hidden pages