Panasonic PT-EW530L User Manual

PT-EZ570 Series

LCD Projectors

PT-EZ570/EZ570L PT-EW630/EW630L PT-EX600/EX600L PT-EW530/EW530L PT-EX500/EX500L

Bright, Ecological Projectors with Excellent System Flexibility

Classrooms

Meeting rooms

Lecture rooms

PT-EZ570G1 Printed in J apan.

All information included here is valid as of April 2012.

For more information about Panasonic projectors, please visit:

Projector Global Web Site – panasonic.net/avc/projector

Facebook –

www.facebook.com/panasonicprojector

YouTube – www.youtube.com/user/ PanasonicProjector

Weights and dimensions shown are approximate. Speciﬁcations and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. The projection distances and throw ratios given in this leaﬂet are for use only as guidelines. For more detailed infor- mation, please consult the dealer from whom you are purchasing the product. The PJLink t rademark is an application trademark in Japan, the U nited States, and other countries and regions or registered trademarks. RoomView, Crestron RoomView, and Crestron Connected are trademarks of Crestron Electronics, Inc. All other trademarks are the property of their respective trademark owners. Projection images simulated. © 2012 Panasonic C orporation. All rights reserved.

High Brightness, Image Quality and Reliability From Educational to Business Applications

PT-EZ570

Series

Meeting rooms

Classrooms

Crisp, clear images even in brightly lit rooms.

Bright, detailed images ideal for CAD, engineering, and design use.

Excellent large-screen projection and easy usability.

Lecture rooms

Specifications

fH: 15.75 kHz, fV: 60 Hz [480i (525i)] f

H: 31.50 kHz, fV: 60 Hz [480p (525p)]

H: 15.63 kHz, fV: 50 Hz [576i (625i)]

H: 31.25 kHz, fV: 50 Hz [576p (625p)]

H: 45.00 kHz, fV: 60 Hz [720 (750)/60p]

H: 37.50 kHz, fV: 50 Hz [720 (750)/50p]

H: 33.75 kHz, fV: 60 Hz [1035/60i]

H: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]

H: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]

H: 28.13 kHz, fV: 25 Hz [1080/25p]

H: 28.13 kHz, fV: 50 Hz [1080/25sF]

H: 27.00 kHz, fV: 24 Hz [1080/24p]

H: 27.00 kHz, fV: 48 Hz [1080/24sF]

H: 33.75 kHz, fV: 30 Hz [1080/30p]

H: 33.75 kHz, fV: 60 Hz [1080/30sF]

H: 67.50 kHz, fV: 60 Hz [1080/60p]

H: 56.25 kHz, fV: 50 Hz [1080/50p]

5,000:1 (full on/full off, lamp power: Auto)

1,920 × 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 × 1,200 pixels.)

Vertical: ±30°*6, horizontal: ±30°*7

Yes

490 W (0.4 W with STANDBY MODE set to ECO*1, 11 W with STANDBY MODE set to NETWORK.)

19.0 mm (0.75˝) diagonal (16:10 aspect ratio)

5,500 lm (lamp power: Auto/Normal)

1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.)

Vertical: ±40°*6, horizontal: ±30°*

20.0 mm (0.80˝) diagonal (4:3 aspect ratio)

6,000 lm (lamp power: Auto/Normal)

1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.)

19.0 mm (0.75˝) diagonal (16:10 aspect ratio)

4,500 lm (lamp power: Auto/Normal)

2,000:1 (full on/full off, lamp power: Auto)

1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.)

Vertical: ±40°

–

20.0 mm (0.80˝) diagonal (4:3 aspect ratio)

5,000 lm (lamp power: Auto/Normal)

1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.)

100–240 V AC, 50/60 Hz

PT-EZ570/EW630/EX600/EW530/EX500*: powered zoom (1.7–2.8:1), powered focus F 1.7–2.3, f 26.9–45.4 mm, PT-EZ570L/EW630L/EX600L/EW530L/EX500L*: optional powere d zoom/focus and fixed-focus lens

330 W UHM lamp × 1

3,000 hours *3 (LAMP POWER: NORMAL), 4,000 hours *3 (LAMP POWER: ECO 1/2)

1.02–10.16 m (40–400 in), 16:10 aspect ratio

90 %

H: 26–80 kHz, fV: 23–85 Hz, dot clock: 162 MHz or lower

fH: 15–120 kHz, fV: 48–100 Hz, dot clock: 230 MHz or lower (Signals exceeding the dot clock rate of 163 MHz are downsampled.)

fH: 15–120 kHz, fV: 48–100 Hz, dot clock: 230 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)

H: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/SECAM/PAL-N]

Ceiling/floor, front/rear

3.7 cm round shape × 1, output power: 10.0 W (monaural)

DVI-D 24-pin × 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) HDMI 19-pin × 1 (Deep Color, compatible with HDCP) D-Sub HD 15-pin (female) × 1

37 dB (LAMP POWER: NORMAL), 31 dB (LAMP POWER: ECO 1/ECO 2)

× 1, recommended replacement cycle: 12,000 hours*

Molded plastic (PC + ABS)

Approximately 10.3 kg (22.7 lbs) (with supplied lens), approximately 9.6 kg (21.2 lbs) (without lens)

Approximately 10.2 kg (22.5 lbs) (with supplied lens), approximately 9.5 kg (20.9 lbs) (without lens)

Operating temperature: 0 °C–40 °C (32 °F–104 °F)*12, operating humidity: 20 %–80 % (no condensation)

Power cord × 1 (× 2 for EZ570E/EZ570EL,EW630E/EW630EL,EX600E/EX600EL,EW530E/EW530EL and EX500E/EX500EL), power cord holder × 1, wireless/wired remote control unit × 1, batteries (R03/LR03/AAA type × 2), computer cable × 1, Software CD-ROM × 1 (Logo Transfer Software, Multi Projector Monitoring and Control Software)

Power supply

Power consumption

LCD panel

Lens

Lamp

Lamp replacement cycle *

Screen size (diagonal)

Brightness *

Center-to-corner uniformity *

Contrast *

Resolution

Scanning frequency

Keystone correction range

Installation

Built-in speaker

Terminals

Operating noise *

Filter

Mechanical shutter

Cabinet materials

Dimensions (W × H × D)

Weight *

Operating environment

Supplied accessories

Panel size

RGB (analog)

DVI-D INPUT Terminal: HDMI INPUT TerminalI: RGB INPUT Terminal:

PT-EZ570/EZ570L*PT-EW630/EW630L*PT-EX600/EX600L* PT-EW530/EW530L*PT-EX500/EX500L*

19.2 mm (0.76˝) diagonal (16:10 aspect ratio)

*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *2 The values above are maximum values when they are used in cycles of being turned on for 2 hours and off for 0.25 hours. When the lamps are turned on and off more frequently, the lamp replacement cycle is shortened. The usage environment affects the lamp replacement cycle. *3 The usage environment affects the lamp replacement cycle. *4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *5 The axis shift function cannot be used with the ET-ELW21. *6 With vertical correction only. *7 With horizontal correction only. *8 Menu selectable. *9 Average value. May differ depending on the actual unit. *10 The usage environment affects the duration of the filter. *11 With legs at shortest position. *12 The operating temperature range is 0 °C to 30 °C (32 °F to 86 °F) when the fan control is set to ON 1 for altitudes from 1,000 m to 2,000 m (3,281 ft to 6,562 ft) above sea level, 0 °C to 30 °C (32 °F to 86 °F) when the fan control is set to ON 2 for altitudes from 2,000 m to 2,700 m (6,562 ft to 8,858 ft) above sea level. * Product numbers vary depending on the market. The general guideline is as follows: The product numbers in the Americas and Taiwan are PT-EZ570U/PT-EZ570UL, PT-EW630U/PT-EW630UL, PT-EX600U/PT-EX600UL, PT-EW530U/ PT-EW530UL and PT-EX500U/PT-EX500UL. The product numbers in Europe, CIS, Asia (except Taiwan), Oceania, Middle East, and Africa are PT-EZ570E/PT-EZ570EL, PT-EW630E/PT-EW630EL, PT-EX600E/PT-EX600EL, PT-EW530E/PT-EW530EL and PT-EX500E/PT-EX500EL.

INPUT 1 *

Model

Optical axis shift Vertical ±60 %, horizontal ±10 % from center of screen

(powered) *

Vertical ±60 %, horizontal ±10 % from center of screen (powered) *

Vertical ±50 %, horizontal ±10 % from center of screen (powered) *

5,000 lm (lamp power: Auto/Normal)

PT-EZ570/EW630/EX600/EW530/EX500*: 489.5 × 164*11 × 434 mm (19.3 × 6.5*11 × 17.1 in) (with supplied lens) PT-EZ570L/EW630L/EX600L/EW530L/EX500L*: 489.5 × 164*11 × 370 mm (19.3 × 6.5*11 × 14.6 in) (without lens)

1.02–10.16 m (40–400 in), 4:3 aspect ratio1.02–10.16 m (40–400 in), 4:3 aspect ratio

Video/S-Video

BPR (YCBCR)

HDMI/DVI-D

Display method

Drive method

Pixels 2,304,000 (1,920 × 1,200) × 3,

total of 6,912,000 pixels

Active matrix

Transparent LCD panel (× 3, R/G/B)

1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels

786,432 (1,024 × 768) × 3, total of 2,359,296 pixels

1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels

786,432 (1,024 × 768) × 3, total of 2,359,296 pixels

LAN:

REMOTE IN:

SERIAL IN:

AUDIO OUT:

AUDIO IN:

RGB OUT:

INPUT 3 *

INPUT 2 *

COMPORNENT/VIDEO INPUT Terminal: S-VIDEO INPUT Terminal:

RGB/VIDEO INPUT Terminal:

RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)

M3 × 1 for wired remote control

D-Sub 9-pin (female) × 1 for external control (RS-232C compliant)

M3 (L, R) × 1 (variable)

RCA (L, R) × 1, M3 (L, R) × 2

D-Sub HD 15-pin (female) × 1

RCA × 3 (YP

BPR

/YCBCR × 1), shared with VIDEO IN (RCA × 1, composite video)

Mini DIN 4-pin × 1 (S-Video)

BNC × 5 (RGB/YP

BPR

/YCBCR × 1), shared with VIDEO IN (BNC × 1, composite video)

PT-

EW630/EW630

PT-

E X600/E X600

PT-

EW530/EW530

PT-

EX500/EX500

5500 lm

WXGA

WUXGA

5000:1

6000 lm

XGA

5000:1

4500 lm

WXGA

2000:1

5000 lm

XGA2000:1

5000 lm

5000:1

PT-

EZ570/EZ570L

* Product numbers vary depending on the market. The general guideline is as follows: The product numbers in the Americas and Taiwan are PT-EZ570U/PT-EZ570UL, PT-EW630U/PT-EW630UL, PT-EX600U/PT-EX600UL, PT-EW530U/ PT-EW530UL and PT-EX500U/PT-EX500UL. The product numbers in Europe, CIS, Asia (except Taiwan), Oceania, Middle East, and Africa are PT-EZ570E/PT-EZ570EL, PT-EW630E/PT-EW630EL, PT-EX600E/PT-EX600EL, PT-EW530E/PT-EW530EL and PT-EX500E/PT-EX500EL.

The PT-EZ570L/PT-EW630L/PT-EX600L/PT-EW530L/PT-EX500L Series is sold without lenses. The specifications are the same as those of the PT-EZ570 Series.

The PT-EZ570 Series projectors provide high brightness and superb contrast in spite of their compact body. The unique Daylight View Basic function allows them to project crisp, high-resolution images without having to dim the room light. From classrooms in elementary and high schools to university lecture rooms, engineering or art classes, and company meeting rooms, these advanced projectors produce bright, easy-to-see images for all kinds of applications. They also feature an eological design that lowers power consumption, flexibility in installation, and easy maintenance.

The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you easily make adjustments with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions.

Flexible Installation

A lens-centered, symmetrical design provides ease of installation, eliminating the need for special considerations when planning the installation site.

Lens-Centered Design

P-in-P Mode

* In STANDBY MODE set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be re ceived for external control using the serial terminal.

Choose from a wide lineup of lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lenses attach and detach with one-touch ease.

A Wide Selection of Optional Lenses

All you need to do is designate four points as the corners of the projected image, and this function automatically carries out horizontal and vertical keystone correction.

* PT-EZ570/EW630/EX600 only.

Corner Keystone Correction* Enables Angled Projection

Extensive interfaces include HDMI and DVI-D input terminals, two sets of computer (RGB) input terminals, and a serial (RS-232C) terminal for external control. It is also possible to output audio during Standby mode. This is convenient when connecting an external audio system through the projector.

Abundant Terminals Including HDMI and DVI-D Inputs

The PT-EZ570 Series projectors feature a high-output 10-watt monaural speaker that produces a large sound volume without requiring external speakers.

Built-in 10-W Speaker

You can change the default Panasonic start up logo to your desired logo. A new logo can be easily uploaded by connecting a computer to the PT-EZ570 Series through the LAN or serial connection by using the Logo Transfer Software*. An abundance of other security measures are also included, such as a security bar, a user password and a control panel lock.

Effective Theft Prevention with the Startup Logo

The PT-EZ570 Series can be easily operated remotely over a LAN network, because it is all done using the computer’s familiar web browser. Furthermore, the projector sends an e-mail message to notify the operator when an error has occurred, or a lamp needs to be replaced.

Web Browser Control/Monitoring and E-mail Message Alert

Panasonic’s original freeware, “Multi Projector Monitoring & Control Software,” allows the user to control and monitor multiple projectors at the same time via LAN. Projectors can be scheduled to turn on and off at a certain hour everyday. When a problem occurs, an alarm message is sent to the monitoring/controlling PC.

Multi Projector Monitoring & Control Software

The LAN terminals support PJLink™ Class 1 connection, which is highly convenient for system construction.

PJLink™ Compatibility

Two different image sources can be simultaneously displayed onto a single screen. You can also switch to P-in-P (Picture-in-Picture) mode and display a sub-window onto the main screen. The sub-window can be positioned at any of the four corners (upper left, upper right, lower left, lower right) to expand the usable area as only a wide-screen projector can do.

Side-by-Side and P-in-P Function

for Effective

Presentations and Lectures

(PT-EZ570/L, PT-EW630/L, PT-EW530/L)

Other Valuable Features

Easy Lamp and Air Filter Replacement

The quiet design keeps noise levels down to 31-dB, so the sound of the cooling fan is hardly noticeable. This helps the audience to keep their attention on the speech when someone is giving a presentation or on the screen images during quiet scenes.

For easy maintenance, you can replace the filter from the side and the lamp from the top of the projector. The filter and lamp are easily replaced even after the projector is installed on the ceiling.

• Closed caption decoder built-in for the US market. (NTSC only)

Quiet 31-dB*8 Design Does Not Interrupt Meetings or Classes

The mechanical lens shutter completely blocks annoying light leakage when the projector is on standby or temporarily not in use, such as during a meeting.

Ecology Conscious Design

The cooling fan continues to operate even when the main power switch is turned off after projection is finished. This also allows the power to be turned off by directly switching off the room’s main breaker for systems, such as ceiling mounted systems, where the main power switch cannot be reached.

• No halogenated flame retardants are used in the cabinet.

• Lead-free glass is used for the lens.

• Lamp power switching further reduces power consumption.

• "ECO" button on the remote control.

• Standby power consumption of only 0.4 W

has been achieved.

• RoHS compliant.

Direct Power Off

The LAN terminal allows a computer connected to the network to use Crestron RoomView™ application software to manage and control system devices.

Crestron RoomView™ Compatibility

System Integration Flexibility and Easy Maintenance

Monitoring &

er.

l Softwar

EZ570/EW630/EX600

ly.

ail Message Aler

remote control

e-mail

Internet

LAN

EZ570 Series

Side-by-Side Mode

*1 The PT-EX600/L has 6,000 lm, PT-EW630/L 5,500 lm, PT-EZ570/L and PT-EX500/L 5,000 lm,

and PT-EW530/L has 4,500 lm of brightness.

For the PT-EZ570/L, PT-EW630/L, PT-EX600/L. The PT-EW530/L andPT-EX500/L has 2,000:1 contrast ratio.

*3 The usage environment affects the duration of the filter. *4

When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one.

*5 With the lamp power set to Eco 1/Eco 2. Up to 3,000 hours with the Lamp power set to Normal. *6

When the Standby mode is set to Eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *7 With the lamp mode set to auto. *8 With the lamp power set to Eco 1 or Eco 2. 37 dB with the lamp power set to Normal. *9 This function is not effective for some source combinations.

Conventional ProjectorDaylight View Basic

Even with its light, compact body, the PT-EZ570 Series produces brightness of up to 6,000 lm

. In addition, the iris automatically adjusts itself to match the situation, resulting in high contrast ratio of up to 5,000:1

Panasonic's Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.

Compact, Yet Bright and High Contrast

Full-HD Ready WUXGA Resolution (PT-EZ570/L)

In response to the increasing popularity of widescreen image viewing, including Blu-ray content, the PT-EZ570/L features native WUXGA resolution for full-HD viewing. This brings you lifelike projection of intricate, highly detailed images.

The Daylight View Basic Function Ensures Clear Images Even in Brightly Lit Rooms

Quality Images with High Brightness

Bright scene

Dark scene

The PT-EZ570 Series projectors’ optical block maintains a high level of performance over time, due to the use of inorganic materials in the LCD panels and polarizers, thus achieving a replacement cycle of 10,000 hours. It also makes them the logical choice for a truly dependable LCD projector system.

Inorganic Materials Maintain Image Quality Longer

A number of functions are provided to reduce power consumption. They adjust the brightness according to ambient light conditions, and reduce the lamp power when there is no signal input or the projector is in AV Mute mode*. You can easily set the Eco Management functions according to operating conditions by using the ECO button on the remote control.

Eco Management Functions

The PT-EZ570 Series projectors feature a lamp replacement cycle of up to 4,000 hours. This helps to lower operating costs by providing longer usage between lamp replacements.

Lamp Replacement Cycle of up to 4,000 Hours

When the Standby mode is set to Eco, the standby power consumption is low at 0.4 W. This lowers running costs, and helps to reduce environmental impact.

Environmentally Friendly Standby Power Consumption of Only 0.4 W

Intelligent Lamp Control System Reduces Power Consumption

The cabinet is designed with a straight airflow path, from intake to exhaust. The shielding of the lens section, where dust is likely to enter, has been further improved to keep dust out. And the sealing performance of the air filter unit and air intake duct has been increased to prevent the entry of dust from the filter periphery, resulting in a highly dust-resistant structure. The Eco Filter unit, which efficiently captures dust in the intake airflow path, requires no replacement for 12,000 hours

. And the large, pleated Micro Cut Filter (electrostatic filter) uses an ion effect to trap minute dust particles, further raising the overall dust-trapping capability. These features minimize the entry of dust into the optical block and maintain brightness over a long period of time, while reducing the hassle of maintenance. Also, in addition to achieving a long replacement cycle, the Eco Filter can be washed with water

and reused

as an environmental consideration.

A Dust-Resistant Cabinet Design and an Eco Filter that Needs No Replacement for 12,000 Hours

Ecology-Conscious Reliability

When the lamp power is set to Auto, the intelligent lamp control system automatically adjusts the lamp output in accordance with the brightness of the projected image and reduces it by up to 70 %

. It also combines with color shift correction, which corrects the shift in the color balance that occurs when the lamp output drops. As a result, power consumption is effectively reduced while excellent color reproduction is maintained.

WUXGA

1920x1200

Full HD

1920x1080

XGA

1024x768

WXGA

1280x800

Security bar

100

％

100

％

Normal mode

Eco mode

Auto mode

Up to 70 %

Conventional Lamp System

Intelligent Lamp Control System

Lamp output

Conventional brightness Decrease brightness

* PT-EW530/L, PT-EX500/L only

Mechanical Lens Shutter (PT-EZ570/L, PT-EW630/L, PT-EX600/L)

* Uploadable still images are limited to 1024 x 768 pixel bitmap files. Also, the application will reduce the number of colours to 191.

+ 2 hidden pages