Panasonic PT-DZ8700U Specification

S P E C F I L E

The PT-DZ8 700 U is not equi ppe d wit h a lens.

Pro du c t Nu mb e r : PT-DZ8700U

Pro du c t Na me : 3-Chip DLP

™

Projector

As of M ay 201 1. Specifications and appearance are subject to change without notice.

SFD 10M 001 -2

1 / 1 9

S P E C F I L E

3-Chi p DLP™Projector

Specifi cat ions

Main unit

Power supply

Power consumption

DLP™ chip Panel size

Display method

Pixels

Lens

Lamp

Screen size

Brightness*

Center-to-corner uniformity*

Contrast*

Resolution

Scanning frequency SDI

Optical axis shift Vertical

Keystone correction range

Installation

2

2

2

HDMI/DVI-D/RGB

YPBPR (YCBCR)

Video/S-Video

Horizontal

P T-DZ8700U

120 V AC, 9.5 A, 60 Hz

970 W (1,000 VA) (0.2 W with standby mode set to eco.*16Wwith

standby mode set to normal. Both with fan stopped.)

24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)

DLP™ chip × 3 (R, G, B), DLP™ projection system

2,304,000 (1,920 × 1,200) × 3, total of 6,912,000 pixels

Optional powered zoom/focus lenses

355 W UHM lamps (× 2) (dual lamp system)

1.78–15.24 m (70–600 inches) (1.78–7.62 m (70 –300 inches) with the

ET-D75LE5), 16:10 aspect ratio

10,600 lumens (dual lamp, high mode)

90%

10,000:1 (full on/full off, in dynamic iris 3 mode)

1,920 × 1,200 pixels (Input signals that exceed this resolution will be

converted to 1,920 × 1,200 pixels.)

SD-SDI signal: SMPTE 259M compliant: 480i, 576i

Single-link HD-SDI signal: SMPTE 292M compliant:

720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p,

1080/24p, 1080/24sF, 1080/30p

Horizontal: 15 kHz–100 kHz, vertical: 24Hz – 120 Hz,

dot clock: 162 MHz or lower

480i (525i): fH 15.75 kHz; fV 60 Hz,

576i (625i): fH 15.63 kHz; fV 50 Hz,

480p (525p): fH 31.50 kHz; fV 60 Hz,

576p (625p): fH 31.25 kHz; fV 50 Hz,

720 (750)/60p: fH 45.00 kHz; fV 60 Hz,

720 (750)/50p: fH 37.50 kHz; fV 50 Hz,

1035/60i: fH 33.75 kHz; fV 60 Hz,

1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,

1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,

1080/25p: fH 28.13 kHz; fV 25 Hz,

1080/24p: fH 27.00 kHz; fV 24 Hz,

1080/24sF: fH 27.00 kHz; fV 48 Hz,

1080/30p: fH 33.75 kHz; fV 30 Hz,

1080/60p: fH 67.50 kHz; fV 60 Hz,

1080/50p: fH 56.25 kHz; fV 50 Hz

fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

±55% (±44% with the ET-D75LE6) from center of screen, powered

±20% (±15% with the ET-D75LE6) from center of screen, powered

When using only the KEYSTONE correction of the Geometric

Adjustment function: Vertical ±40°, horizontal ±15°

(vertical ±22° and horizontal ±15° with the ET-D75LE5,

vertical ±28° and horizontal ±10° with the ET-D75LE6)

When using both the KEYSTONE and CURVED corrections of the

Geometric Adjustment function: Vertical ±5°, horizontal ±5°

(vertical ±10° and horizontal ±10° with the ET-D75LE3,

vertical ±10° and horizontal ±15° with the ET-D75LE4/D75LE8)

Ceiling/floor, front/rear

As of M ay 201 1

SFD10M 001 -2

2 / 1 9

S P E C F I L E

3-Chi p DLP™Projector

Terminals SDI IN

HDMI IN

DVI-D IN

RGB 1 IN

R, G, B

Y, P

RGB 2 IN

R, G, B

Y, P

VIDEO IN

S-VIDEO IN

SERIAL IN

SERIAL OUT

REMOTE 1 IN

REMOTE 1 OUT

REMOTE 2 IN

LAN

Power cord length

Cabinet materials

Dimensions (W × H × D):

6

Weight*

Operating temperature

Operating humidity

B, PR (Y, CB, CR )

B, PR (Y, CB, CR )

P T-DZ8700U

BNC × 1,

SD-SDI signal (YC

SMPTE 259M compliant: 480i, 576i

Single-link HD-SDI signal (YCBCR 4:2:2 10-bit):

SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,

1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p

HDMI 19-pin × 1, Deep Color, compatible with HDCP,

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,

1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p

(non-interlaced signals only),

VGA (640 × 480) – WUXGA*3(1,920 × 1,200),

dot clock: 25 MHz–162 MHz

NOT E: Comp ati bl e wit h non- in te rla ce d signal s onl y.

DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible,

for single link only

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,

1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,

VGA (640 × 480) – WUXGA*3(1,920 × 1,200),

dot clock: 25 MHz–162 MHz

NOT E: Comp ati bl e wit h non- in te rla ce d signal s onl y.

BNC ×5

R: 0.7 Vp-p, 75 ohms,

G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,

B: 0.7 Vp-p, 75 ohms

HD, VD/SYNC: TTL, high impedance, positive/negative automatic

NOT E: SYNC /HD and VD ter mi nal s do not accept tri -l evel syn c sig nal s.

Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms

D-sub HD 15-pin (female) ×1

R: 0.7 Vp-p, 75 ohms,

G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,

B: 0.7 Vp-p, 75 ohms

HD, VD/SYNC: TTL, high impedance, positive/negative automatic

NOT E: SYNC /HD and VD ter mi nal s do not accept tri -l evel syn c sig nal s.

Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms

BNC × 1, 1.0 Vp-p, 75 ohms

Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms

D-sub 9-pin × 1 for exter nal control (RS-232C compliant)

D-sub 9-pin × 1 for link control

M3 jack × 1 for wired remote control

M3 jack × 1 for link control

D-sub 9-pin × 1 for exter nal control (parallel)

RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant

with PJLink™ (class 1)

3.0 m (9 ft 10 in)

Molded plastic

530 mm × 200 mm*4× 548.5 mm*

(20-7/8˝ × 7-7/8˝ *4× 21-19/32˝*5) (without lens)

Approx. 24 kg (52.9 lbs) (without lens)

0°–45°C (32°–113°F)*

10%– 80% (no condensation)

BCR 4:2:2 10-bit):

5

7

As of M ay 201 1

SFD10M 001 -2

3 / 1 9

S P E C F I L E

3-Chi p DLP™Projector

Remote control unit

Power supply

Operation range*

Dimensions (W × H × D)

Weight

Supplied accessories

Optional accessories

Zoom lens (0.9–1.1:1)

Zoom lens (1.3 – 1.7:1)

Zoom lens (1.7– 2.4:1)

Zoom lens (2.4 – 4.7:1)

Zoom lens (4.6 – 7.4:1)

Zoom lens (7.3 – 13.8:1)

Fixed-focus lens (0.7:1)

Lens motor cover

Ceiling mount bracket

Attachment for ceiling mount bracket

Frame

Smoke cut filter

Replacement lamp unit

Replacement filter unit

8

P T-DZ8700U

3 V DC (AA type battery × 2)

Approx. 30 m (98 ft 5 in) when operated from directly in front of the

signal receptor

51 × 176 × 28 mm (2˝ × 6-15/16˝ × 1-3/32˝)

Approx. 134 g (4.7 oz) (including batteries)

Power cord with security lock (× 1)

Wireless/wired remote control unit (× 1)

Batteries for remote control (AA type × 2)

Safety wire rope (× 1)

ET-D75LE6

ET-D75LE10

ET-D75LE20

ET-D75LE30

ET-D75LE4

ET-D75LE8

ET-D75LE5

ET-D75MC1

ET-PKD310H (for high ceilings)

ET-PKD310S (for low ceilings)

ET-PAD310

ET-PFD310

ET-SFD310

ET-LAD310 (one bulb)

ET-LAD310W (a set of two bulbs)

ET-ACF310

Wei ght s and dime nsi on s sho wn are appro xi ma te. Spec ifica ti ons and app ea ran ce are subj ec t to cha nge with ou t noti ce .
*1 Whe n the stan dby mode is set to eco, netw or k func ti on s such as powe r on ove r the LAN netw ork wi ll not ope rat e, and the se ri al out pu t termi-

nal cann ot be used . Also , onl y cer tai n com mands can be receiv ed for exte rn al cont rol usin g the ser ia l termin al .
*2 Measu remen t, me as uri ng cond iti on s, an d met hod of nota tion all comp ly wit h ISO 2111 8 inte rn at ional stan dar ds .
*3 WUX GA resol ut io n is supp or te d only when the sign al s are com pl ia nt wit h VES A CVT-RB (Coo rdi na ted Vide o Timi ng -R edu ce d Bla nki ng ).
*4 Wit h leg s at sho rte st posi tio n.
*5 Exc lu di ng the opti on al len s.
*6 Ave ra ge va lue (exc lu din g the opti ona l len s) . May dif fer depe nd ing on mode ls .
*7 The oper at ing temp er atu re ra ng e is 0°C (32 °F ) to 40°C (104 °F ) when used in High -Al ti tude mod e (1, 400 m (4 ,59 3 ft) to 2,700 m (8 ,85 8 ft) ).
*8 Ope ra ti on ran ge diffe rs depe ndi ng on envi ron me nts .

As of M ay 201 1

SFD10M 001 -2

4 / 1 9

540 (21-1/4)

548.5 (21-19/32)

8.5 (11/32)

530 (20 -7/8 )

462 (18-3/16)

468 (18-7/16)26 (1-1/32)

100 (3-15/16)

200 (7-7/8)

S P E C F I L E

1

6789 10 111213

23 4 5

3-Chi p DLP™Projector

Dimensi ons

P T-DZ8700U

uni t : m m (in ch)
NOT E: This il lu str at io n is not dra wn to sc al e.

Terminals

1 Remote 1 input

2 Remote 1 output

3 Remote 2 input

4 Serial inp ut

5 Serial out put

6 SDI i npu t

7 HDMI input

8 Video inp ut

9 S-Video input

10 RG B 1 input

11 RG B 2 Input

12 DV I-D inpu t

13 LA N connec tor

As of M ay 201 1

SFD10M 001 -2

5 / 1 9

S P E C F I L E

Upper edge of projected image

342

(13-15/32)

∅

60.5

(2-3/8)

198

(7-25/32)

*

1

*

2

Lower edge of projected image

Projected image

L

L

L

340–420

(13-3/8–

16-17/32)

*

2

436–516

(17-5/32–

20-5/16)

100

(3-15/16)

100

(3-15/16)

100
(3-15/16)

100

(3-15/16)

Projected image

HH

3-Chi p DLP™Projector

Standard s ett ing-up position

P T-DZ8700U

*1 W hen the len s prot ru de s to the

max im um .
212 mm (8-1 1/ 32˝ ) wit h the ET-D 75L E6

125 mm (4-2 9/ 32˝ ) wit h the ET-D 75L E1 0
114 mm (4-1 /2 ˝) wit h the ET- D75 LE 1
121 mm (4-3 /4 ˝) wit h the ET- D75 LE 20
99 mm (3- 29 /3 2˝) with the ET-D75 LE 2
121 mm (4-3 /4 ˝) wit h the ET- D75 LE 30
102 mm (4-1 /3 2˝) with the ET-D75 LE 3
126 mm (4-3 1/ 32˝ ) wit h the ET-D 75L E4
254 mm (10˝ ) wit h the ET-D7 5L E8
202 mm (7-1 5/ 16˝ ) wit h the ET-D 75L E5

*2 Adj us ta ble in 40 mm (1-9 /1 6˝) step s.

uni t : m m (in ch)

NOT E:

Ill us tr ati on s sho w the pro je cto r ins talle d
usi ng opti ona l cei li ng mou nt brac ket
ET-PK D3 10H and an opt io nal lens .

Thi s ill us tra ti on is not drawn to sca le .

C a u t io n :

• All c on struction work should be done by a qualified t ec hn ician.

• When mounting to the ceiling, use the special m ou nt in g bracket . To prevent the p ro je ct or from sway in g or drop ­ping, attach the wire that is included with the proj ector between the mount in g bracket a nd the ceiling.

As of M ay 201 1

SFD10M 001 -2

6 / 1 9