Panasonic PT-DZ10KU User Manual

PEC

ILE

Product Number :

Product Name :

PT-DZ10K

3-Chip DLP™Projector

As of April 2013. Specifications and appearance are subject to change without notice.

SFD12M023

1/17

S PEC F ILE

3-Chip DLP™Projector

Specifications

Main unit

Power supply

Power consumption

DLP™ chip Panel size

Lens

Lamp

Screen size

Brightness*

Center-to-corner uniformity*

Contrast*

Resolution

Scanning frequency SDI

Optical axis shift Vertical

120 V AC, 50/60 Hz

220–240 V AC, 50/60 Hz

Display method

Pixels

HDMI/DVI-D/RGB

(YCBCR)

BPR

Video/S-Video

Horizontal

PT-DZ10K

120 V AC, 9 A, 50/60 Hz

220–240 V AC, 4.7 A, 50/60 Hz

925 W (1,010 VA) (0.2 W with standby mode set to eco.*

standby mode set to normal. Both with fan stopped.)

900 W (980 VA) (0.3 W with standby mode set to eco.*1 9 W with standby

mode set to normal. Both with fan stopped.)

24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)

DLP™ chip × 3 (R, G, B), DLP™ projection system

2,304,000 (1,920 × 1,200) × 3, total of 6,912,000 pixels

Optional powered zoom/focus lenses

355 W UHM lamps (× 2) (dual lamp, normal mode)

1.78–25.4 m (70–1,000 inches) (1.78–15.24 m (70–600 inches) with the

ET-D75LE8), 16:10 aspect ratio

10,600 lumens (dual lamp, normal mode)

90%

10,000:1 (full on/full off, in dynamic iris 3 mode)

1,920 × 1,200 pixels

3G-SDI signal (RGB 4:4:4 12-bit/10-bit):

SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i,

1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p

3G-SDI signal (YP

4:2:2 10-bit):

BPR

SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p

HD-SDI signal (YP

4:2:2 10-bit):

BPR

SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i,

1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p,

1125(1080)/24sF, 1125(1080)/30p

SD-SDI signal (YC

4:2:2 10-bit):

BCR

SMPTE ST 259 compliant: 525i(480i), 625i(576i)

Horizontal: 15 kHz–100 kHz, vertical: 24 Hz – 120 Hz,

dot clock: 25 –162 MHz or lower (HDMI/DVI: 25 MHz – 162 MHz)

525i (480i): f

625i (576i): f

525p (480p): f

625p (576p): f

750 (720)/60p: f

750 (720)/50p: f

1125 (1035)/60i: f

1125 (1080)/60i: f

15.75 kHz; fV60 Hz,

15.63 kHz; fV50 Hz,

31.50 kHz; fV60 Hz,

31.25 kHz; fV50 Hz,

45.00 kHz; fV60 Hz,

37.50 kHz; fV50 Hz,

33.75 kHz; fV60 Hz,

1125 (1080)/50i: fH28.13 kHz; fV50 Hz,

1125 (1080)/25p: f

1125 (1080)/24p: f

1125 (1080)/24sF: f

1125 (1080)/30p: f

28.13 kHz; fV25 Hz,

27.00 kHz; fV24 Hz,

27.00 kHz; fV48 Hz,

33.75 kHz; fV30 Hz,

1125 (1080)/60p: fH67.50 kHz; fV60 Hz,

1125 (1080)/50p: f

H: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

56.25 kHz; fV50 Hz

fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

±55% (±44% with the ET-D75LE6) from center of screen, powered

±20% (±15% with the ET-D75LE6) from center of screen, powered

NOTE: Optical axis shift function cannot be operated when used with the

ET-D75LE50.

6 W with

As of April 2013

SFD12M023

2/17

S PEC F ILE

3-Chip DLP™Projector

Keystone correction range

Installation

Terminals SDI IN

HDMI IN

DVI-D IN

RGB 1 IN

R, G, B

Y, P

S-Video signal

RGB 2 IN

R, G, B

Y, P

VIDEO IN

SERIAL IN

SERIAL OUT

REMOTE 1 IN

REMOTE 1 OUT

REMOTE 2 IN

LAN

Power cord length

Cabinet materials

Dimensions (W ×H × D):

Weight*

Operation noise*

Operating temperature

Operating humidity

B, PR (Y, CB, CR)

, PR(Y, CB, CR)

PT-DZ10K

Vertical ±40°, horizontal ±15°

(vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50,

vertical ±28° and horizontal ±15° with the ET-D75LE6)

When using only the KEYSTONE correction of the Geometric Adjustment

function: Vertical ±40°, horizontal ±15°

Ceiling/floor, front/rear

BNC × 1,

3G-SDI signal: SMPTE ST 424 compliant

HD-SDI signal: SMPTE ST 292 compliant

SD-SDI signal: SMPTE ST 259 compliant

HDMI 19-pin × 1, Deep Color, compatible with HDCP,

525i(480i)*

750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p,

1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p,

1125(1080)/50p VGA (640 × 480) – WUXGA*

NOTE: Compatible with non-interlaced signals only.

DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible,

for single link only

525i(480i)*

750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p,

1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p,

1125(1080)/50p VGA (640 × 480) – WUXGA*

NOTE: Compatible with non-interlaced signals only.

BNC ×5

R: 0.7 Vp-p, 75 ohms,

G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,

B: 0.7 Vp-p, 75 ohms

HD, VD/SYNC: TTL, high impedance, positive/negative automatic

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms

Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms

D-sub HD 15-pin (female) ×1

R: 0.7 Vp-p, 75 ohms,

G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,

B: 0.7 Vp-p, 75 ohms

HD, VD/SYNC: TTL, high impedance, positive/negative automatic

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms

BNC × 1, 1.0 Vp-p, 75 ohms

D-sub 9-pin (female) ×1 for external control (RS-232C compliant)

D-sub 9-pin (male) ×1 for link control

M3 jack ×1 for wired remote control

M3 jack ×1 for link control

D-sub 9-pin ×1 for external control (parallel)

RJ-45 ×1 for network connection, 100Base-TX/10Base-T, compliant

with PJLink™ (class 1)

3.0 m (9

Molded plastic

530 × 200*5× 548.5 mm

(20-7/8 × 7-7/8*

24 kg (52.9 lbs) (without lens)

43 dB (normal mode), 37 dB (eco mode)

0°– 45°C (32°–113°F)*

10%–80% (no condensation)

, 625i(576i)*3, 525p(480p), 625p(576p), 750(720)/60p,

(1,920 × 1,200),

dot clock: 25 MHz–162 MHz

, 625i(576i)*3, 525p(480p), 625p(576p), 750(720)/60p,

(1,920 × 1,200),

dot clock: 25 MHz–162 MHz

(RS-232C compliant)

10 in)

× 21-19/32 inches) (without lens)

As of April 2013

SFD12M023

3/17

S PEC F ILE

3-Chip DLP™Projector

Remote control unit

Power supply

Operation range*

Dimensions (W × H × D)

Weight

Supplied accessories

Optional accessories

Zoom lens (0.9–1.1:1)

Zoom lens (1.3–1.7:1)

Zoom lens (1.7– 2.4:1)

Zoom lens (2.4–4.7:1)

Zoom lens (4.6–7.4:1)

Zoom lens (7.3–13.8:1)

Fixed-focus lens (0.7:1)

Lens motor cover

Ceiling mount bracket

Attachment for ceiling mount bracket ET-PAD310

Frame

Smoke cut filter

Replacement smoke cut filter ET-SFR320

Replacement lamp unit

Replacement lamp unit for portrait mode

Replacement filter unit

3 V DC (AA/R6 type battery × 2)

Approx. 30 m (98

signal receptor

51 × 176 × 28 mm (2 × 6-15/16 × 1-3/32 inches)

Approx. 134 g (4.7 oz) (including batteries)

Power cord (×1) (x2 for PT-DZ10KE)

Wireless/wired remote control unit (× 1)

Batteries for remote control (AA/R6 type × 2)

Lens drop-prevention screw (× 1)

Softwar

e CD-ROM (Logo Transfer Software, Multi Projector Monitoring

& Control Software) (× 1)

ET-D75LE6

ET-D75LE10

ET-D75LE20

ET-D75LE30

ET-D75LE40

ET-D75LE8

ET-D75LE50

ET-D75MC1

ET-PKD310H (for high ceilings)

ET-PKD310S (for low ceilings)

-PFD310

-SFD320

ET-LAD310A (one bulb)

ET-LAD310AW (a set of two bulbs)

ET-LAD320P (one bulb)

ET-LAD320PW (a set of two bulbs)

ET-EMF320

PT-DZ10K

5 in) when operated from directly in front of the

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi-

nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.

2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)

4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).

5 With legs at shortest position.

6 Average value (excluding the optional lens). May differ depending on models.

* *7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from

1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude. The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the ET-LAD320P/LAD320PW lamp is mounted and the projector is used in portrait configuration. The operating temperature range is 0 °C to 35 °C (32 °F to 95 °F) when the FAN CONTROL is set to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector is used with the ET-SFD320 Smoke Cut Filter, the operating temperature range is 0 °C to 30 °C (32 °F to 86 °F).

*8 Operation range differs depending on environments.

As of April 2013

SFD12M023

4/17

S PEC F ILE

3-Chip DLP™Projector

Dimensions

540 (21-1/4)

548.5 (21-19/32)

8.5

(11/32)

unit : mm (inch) NOTE: This illustration is not drawn to scale.

100

200 (7-7/8)

462 (18-3/16) 468 (18-7/16)

530 (20-7/8)

(3-15/16)

(1-1/32)

PT-DZ10K

Terminals

1 Remote 1 input

2 Remote 1 output

3 Remote 2 input

4Serial i nput

5Serial output

6 SDI input

7HDMI i nput

8 RGB 1 input

9 RGB 2 Input

10 DVI-D i nput

11 Video input

12 LAN connector

As of April 2013

SFD12M023

5/17

S PEC F ILE

3-Chip DLP™Projector

Standard setting-up position

Upper edge of projected image

Projected image

H H

Lower edge of projected image

Projected image

(7-25/32)

100

(3-15/16)

198

φ60.5

(12-3/8)

342

(13-15/32)

100 (3-15/16)

340～420

(13-3/8–

100

(3-15/16)

100

(3-15/16)

–

(17-5/32

16-17/32)

436～516

PT-DZ10K

*1 When the lens protrudes to the

maximum. 212 mm (8-11/32) w ith the ET-D75LE6

125 mm (4-29/32) w ith the ET-D75LE10

20-5/16)

121 mm (4-3/4) w ith the ET-D75LE20 121 mm (4-3/4) w ith the ET-D75LE30 124 mm (4-7/8) w ith the ET-D75LE40 254 mm (10) w ith the ET-D75LE8 203 mm (8) w ith the ET-D75LE50

*2 Adjustable in 40 mm (1-9/16) steps.

NOTE:

Illustrations show the projector installed using optional ceiling mount bracket ET-PKD310H and an optional lens.

This illustration is not drawn to scale.

unit : mm (inch)

Caution:

• All construction work should be done by a qualified technician.

• When mounting to the ceiling, use the special mounting bracket.

Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket.

As of April 2013

SFD12M023

6/17

+ 11 hidden pages