Panasonic PT-DX820BE User Manual

PEC

SFD15M025

ILE

Product Number :

Product Name :

PT-DX820W/DX820LW PT-DX820B/DX820LB

DLP™Projectors

As of April 2015. Specifications and appearance are subject to change without notice.

1/16

PT-DX820W/DX820LW/DX820B/DX820LB

DLP™ Projectors

SFD15M025

Specifications

Main unit

Power supply 120–240 V AC, 50/60 Hz Power consumption

DLP™ chip Panel size

Lens

Lamp Screen size

Brightness* Center-to-corner uniformity* Contrast*2 2,400:1 (full on/full off) Resolution

Scanning frequency

Optical axis shift

Keystone correction range

Installation Ceiling/floor, front/rear

NORMAL

STANDBY MODE

)

790 W (810 VA) (0.3 W with

STANDBY MODE

set to

max. 2,696 BTU (without light output: 2,601 BTU)

17.8 mm (0.7 in) diagonal (4:3 aspect ratio) Display method Pixels

PT-DX820W/B PT-DX820LW/LB

DLP™ chip × 1, DLP™ system 786,432 (1,024 × 768) × 1, total of 786,432 pixels Powered zoom/focus lenses (1.8–2.5:1), F 1.7–1.9, f 25.6–35.7 mm Optional powered zoom/focus lenses and fixed-focus lens 310 W UHM lamps (× 2)

1.27–15.24 m (50–600 inches)

*1.27 – 5.08 m (50 – 200 inches) with the ET-DLE055 (4:3 aspect ratio) *2.54 – 8.89 m (100 – 350 inches) with the ET-DLE030 (4:3 aspect ratio)

8,200 lumens (dual lamp, 90%

LAMP MODE: NORMAL

1,024 × 768 pixels HDMI/DVI-D RGB YP

(YCBCR)

BPR

: 15–100 kHz, fV: 24–120 Hz, dot clock: 25–162 MHz

: 15–100 kHz, fV: 24–120 Hz, dot clock: 20–162 MHz

525i (480i): f

625i (576i): f

525p (480p): f

15.75 kHz; fV60 Hz,

15.63 kHz; fV50 Hz,

H 31.50 kHz; fV 60 Hz,

625p (576p): fH31.25 kHz; fV50 Hz,

750 (720)/60p: f

750 (720)/50p: f

1125 (1035)/60i: f

1125 (1080)/60i: f

45.00 kHz; fV60 Hz,

H H 37.50 kHz; fV 50 Hz,

33.75 kHz; fV60 Hz,

H H 33.75 kHz; fV 60 Hz,

1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,

1125 (1080)/25p: f

1125 (1080)/24p: f

1125 (1080)/24sF: f

1125 (1080)/30p: f

28.13 kHz; fV25 Hz,

27.00 kHz; fV24 Hz,

27.00 kHz; fV48 Hz,

33.75 kHz; fV30 Hz,

1125 (1080)/60p: fH67.50 kHz; fV60 Hz,

Video/YC

1125 (1080)/50p: f

: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]

56.25 kHz; fV50 Hz

Vertical: -13% – +50% (powered) (-13% – +45% with the ET-DLE085)

horizontal: -10% – +30% (powered) (-10% – +28% with the ET-DLE085)

NOTE: Optical

axis shift function cannot be operated when used with the ET-DLE055.

If using the ET-DLE030, the optical axis is fixed.

Vertical ±40°, horizontal: ±15°

(Vertical: ±22° with the ET-DLE085/DLE055),

(Vertical: +5° with the ET-DLE030)

Curved correction (Geometric adjustment)

4 corner correction

set to

ECO

)

*1, 3 W with

As of April 2015 2/16

PT-DX820W/DX820LW/DX820B/DX820LB

DLP™ Projectors

SFD15M025

Terminals

HDMI IN

DVI-D IN

RGB 1 IN

R, G, B

Y, P

, PR(Y, CB, CR)

YC signal Video signal

RGB 2 IN

R, G, B

, PR(Y, CB, CR)

Y, P

SERIAL IN

SERIAL OUT

REMOTE 1 IN

REMOTE 1 OUT

REMOTE 2 IN D-sub 9-pin ×1 for external control (parallel)

LAN/DIGITAL LINK RJ-45 ×1for network and DIGITAL LINK (video/network/serial control)

USB DC OUT (5V/0.9A)

HDMI 19-pin × 1, Deep Color, compatible with HDCP,

DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible,

for single link only

BNC ×5

R: 0.7 Vp-p, 75 ohms,

G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,

B: 0.7 Vp-p, 75 ohms

HD, VD/SYNC: TTL, high impedance, positive/negative automatic

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms

Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms

1.0 Vp-p, 75 ohms

D-sub HD 15-pin (female) ×1

R: 0.7 Vp-p, 75 ohms,

G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,

B: 0.7 Vp-p, 75 ohms

HD, VD/SYNC: TTL, high impedance, positive/negative automatic

NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.

Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms

D-sub 9-pin (female)

D-sub 9-pin (male) ×1 for link control

M3 jack ×1 for wired remote control

M3 jack ×1 for link control

(female)

connection, 100Base-TX, compatible with Art-Net, compliant with

PJLink™ (class 1), Deep Color, compatible with HDCP,

×1 for external control (RS-232C compliant)

(RS-232C compliant)

As of April 2015 3/16

PT-DX820W/DX820LW/DX820B/DX820LB

DLP™ Projectors

SFD15M025

Power cord length Cabinet materials

Dimensions (W × H × D)

Weight*

Operation noise*

Operating temperature Operating humidity

Remote control unit

Power supply Operation range

Dimensions (W × H × D) Weight

Supplied accessories

3.0 m (9 ft 10 in) Molded plastic

(PT-DX820W/DX820LW : White) (PT-DX820B/DX820LB : Black)

498 × 175* (19-19/32 × 6-7/8*

× 521mm

× 20-1/2 inches) (with supplied lens) 498 × 175*3× 508mm (19-19/32 × 6-7/8*3× 20 inches) (without lens, with lens cap)

498 × 175*3× 498mm

Approx. 17.8 kg (39.2 lbs) (with supplied lens)

(19-19/32 × 6-7/8*

× 19-19/32inches) (without lens and lens cap)

Approx. 17.0 kg (37.5 lbs) (without lens)

30 dB (dual lamp operation, 28 dB (dual lamp operation, 0–45 °C (32 –113 °F)*

LAMP MODE: NORMAL), LAMP MODE: ECO)

10%–80% (no condensation)

3 V DC (AAA type battery × 2) Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor 48 × 145 × 27 mm (1-28/32 × 5-23/32 × 1-1/16 inches) Approx. 102 g (3.6 oz) (including batteries)

Power cord (× 1) Wireless/wired remote control unit (× 1) Batteries for remote control (AAA type ×2) Operating Instructions (× 1) Softwar

e CD-ROM (Logo Tr ansfer Software, Multi Projector Monitoring

Control Software)e) (× 1) Lens Mount cover (× 1) Lens cover (× 1) Clasp for lamp unit (× 2)

Optional accessories

Digital interface box

ET-YFB100G

Digital LINK Switcher ET-YFB200G Zoom lens (0.8–1.0:1) ET-DLE085 Zoom lens (1.3–2.0:1) Zoom lens (2.4– 3.7:1) Zoom lens (3.7– 5.6:1) Zoom lens (5.5– 8.9:1)

Fixed-focus lens (0.4:1) Fixed-focus lens (0.8:1) Ceiling mount bracket

ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 ET-DLE030 ET-DLE055 ET-PKD120H (for high ceilings) ET-PKD120S (for low ceilings)

High-ceiling mount bracket

ET-PKD130H

(6-axis adjustment mechanism) Attachment for ceiling mount bracket ET-PKD130B Early Warning Software Replacement lamp unit

ET-SWA100 ET-LAD70 ET-LAD70W (Twin Pack)

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

1 When the

cannot be used. Also, only certain commands can be received for e xternal c ontrol using the serial terminal.

2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 inter national standards.

With

Average value. May differ depending on models.

When using the projector at elevations lower than 2,700 m(8,858") above sea level, and the operating environment temperature becomes 35 °C (95 °F) or

higher, the light output may be reduced to protect the projector. When using the projector at elevations between 2,700 m(8,858") and 4,200 m(13,780"), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be recuced to protect the projector.

STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal

legs at shortest position.

As of April 2015 4/16

PT-DX820W/DX820LW/DX820B/DX820LB

DLP™ Projectors

SFD15M025

Dimensions

498(19-19/32)

520.6(20-1/2)

249(9-13/16)

22.6

(7/8)

(13/32)

175

(6-7/8)

156(6-5/32)19

175(6-7/8)

95.5 (3-3/4)

76.5(3)

unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT-DX820.

416(16-3/8)

498(19-19/32)

Terminals

12 34 56

7891011

(3/4)

4.5 (3/16)

1 Remote 1 input

2 Remote 1 output

3 Remote 2 input

4 Serial input

5 Serial output

6 Dc out 5v

7 8 RGB 1 input

RGB 2 Input

DVI-D input

HDMI input

LAN/DIGITAL LINK connector

As of April 2015 5/16

+ 11 hidden pages