Panasonic PT-DX800S, PT-DX800LS, PT-DX800LK, PT-DX800K Product Sheet

S P E C F I L E

The PT-DX8 00L S and PT- DX 800 LK are not equ ip ped with a len s.

Pro du c t Nu mb e r : PT-DX800S/DX800K

PT-DX800LS/DX800LK

Pro du c t Na me : DLP

As of J une 201 1. Specifications and appearance are subject to change without not ice.

SFD 11M 002

™

Projectors

1 / 1 4

S P E C F I L E

DLP™Projectors

PT-DX800S/DX800K/DX800LS/DX800LK

Specifi cat ions

Main unit

Power supply

Power consumption 120 V AC, 60 Hz

220 – 240 V AC, 50/60 Hz

DLP™ chip Panel size

Display method Pixels

Lens PT-DX800S/DX800K

PT-DX800LS/DX800LK Lamp Screen size

Brightness* Center-to-corner uniformity* Contrast* Resolution

Scanning frequency DVI-D

Optical axis shift

Keystone correction range Installation Terminals DVI-D IN

RGB

YPBPR (YCBCR)

Video/S-Video

RGB 1 IN

R, G, B

Y, PB, PR (Y, CB, CR )

120 V AC, 7.5 A, 50/60 Hz 220 – 240 V AC, 4.3 A, 50/60 Hz 790 W (830 VA) (0.2 W with standby mode set to eco*1, 8Wwith standby mode set to normal. Both with fan stopped.) 760 W (950 VA) (0.3 W with standby mode set to eco*1, 9 W with standby mode set to normal. Both with fan stopped.)

17.8 mm (0.7 in) diagonal (4:3 aspect ratio) DLP™ chip × 1, DLP™ system 786,432 (1,024 × 768) × 1, total of 786,432 pixels Powered zoom/focus lenses (1.8 –2.5:1), F 1.7–1.9, f 25.6 – 35.7 mm Optional powered zoom/focus lenses and fixed-focus lens 300 W (max. 310 W) UHM lamps (× 2) (dual lamp system)

1.27–15.24 m (50–600 inches) (1.27–5.08 m (50–200 inches) with the ET-DLE055), 4:3 aspect ratio 8,000 lumens (dual lamp, lamp mode: high) 90% 2,000:1 (full on/full off, contrast mode: high, brightness: 3,000 lumens) 1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.) fH: 15 kHz–91 kHz, fV:50Hz – 85 Hz, dot clock: 162 MHz or lower fH: 15 kHz – 91 kHz, fV:50Hz – 85 Hz, dot clock: 150 MHz or lower 480i (525i): fH 15.75 kHz; fV 60 Hz, 576i (625i): fH 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.50 kHz; fV 60 Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720 (750)/50p: fH 37.50 kHz; fV 50 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080/25p: fH 28.13 kHz; fV 25 Hz, 1080/24p: fH 27.00 kHz; fV 24 Hz, 1080/24sF: fH 27.00 kHz; fV 48 Hz, 1080/30p: fH 33.75 kHz; fV 30 Hz, 1080/60p: fH 67.50 kHz; fV 60 Hz, 1080/50p: fH 56.25 kHz; fV 50 Hz fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] Vertical: +50% (powered), horizontal: ±10% (powered) (Vertical: +45%, horizontal: ±10% with the ET-DLE080) Vertical: ±40° (±30° with the ET-DLE055 and ET-DLE080) Ceiling/floor, front/rear DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link only

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 × 480) – WUXGA*3(1,920 × 1,200), compatible with non-

interlaced signals only, dot clock: 25–162 MHz BNC × 5 R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD/VD, SYNC: High impedance, TTL (positive/negative)

NOT E: HD/S YNC , and VD term ina ls do not acc ept tri- level sync signa ls .

Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms

As of J une 201 1

SFD11M 002

2 / 1 4

S P E C F I L E

DLP™Projectors

PT-DX800S/DX800K/DX800LS/DX800LK

RGB 2 IN

R, G, B

B, PR (Y, CB, CR )

Y, P VIDEO IN S-VIDEO IN SERIAL IN SERIAL OUT REMOTE 1 IN REMOTE 1 OUT REMOTE 2 IN LAN

Power cord length Cabinet materials Dimensions (W × H × D) PT-DX800S/DX800K

PT-DX800LS/DX800LK

Weight PT-DX800S/DX800K

PT-DX800LS/DX800LK

Operation noise*

Operating temperature Operating humidity

D-sub HD 15-pin × 1 R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD/VD, SYNC: High impedance, TTL (positive/negative)

NOT E: HD/S YNC , and VD term ina ls do not acc ept tri- level sync signa ls .

Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms BNC × 1, 1.0 Vp-p, 75 ohms Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms D-sub 9-pin × 1 for external control (RS-232C compliant) D-sub 9-pin × 1 for link control (RS-232C compliant) M3 jack × 1 for wired remote control M3 jack × 1 for link control D-sub 9-pin × 1 for external control (parallel) RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™

3.0 m (9 ft10 in) Molded plastic 498 mm × 175 mm*4× 466 mm*5(19-19/32˝ × 6-7/8˝ *4× 18-11/32˝ *5) (with supplied lens) 498 mm × 175 mm*4× 432 mm*5(19-19/32˝ × 6-7/8˝ *4× 17˝ *5) (without lens) Approx. 16.3 kg (35.9 lbs) (with supplied lens) Approx. 15.4 kg (34.0 lbs) (without lens) 39 dB (lamp mode: high), 35 dB (lamp mode: normal) 0°– 45°C (32°–113°F)*

20%– 80% (no condensation)

Remote control unit

Power supply Operation range*

Dimensions (W × H × D) Weight

Supplied accessories

Optional accessories

Zoom lens (0.9 –1.0:1) Zoom lens (1.3 – 2.0:1) Zoom lens (2.4 – 3.7:1) Zoom lens (3.7– 5.6:1) Zoom lens (5.5– 8.9:1) Fixed-focus lens (0.8:1) Ceiling mount bracket

Replacement lamp unit

Replacement filter unit

3 V DC (R6/AA type battery × 2) Approx. 30 m (98 ft5 in) when operated from directly in front of the signal receptor 51 × 176 × 23 mm (2˝ × 6-15/16˝ × 29/32˝) Approx. 134 g (4.7 oz) (including batteries)

Power cord (× 1) Power cord security lock (× 1) Wireless/wired remote control unit (× 1) Batteries for remote control (R6/AA type × 2)

ET-DLE080 ET-DLE150 ET-DLE250 ET-DLE350 ET-DLE450 ET-DLE055 ET-PKD56H (for high ceilings) ET-PKD55S (for low ceilings) ET-LAD60A ET-LAD60AW (Twin Pack) ET-EMF300

Wei ght s and dime nsi on s sho wn are appro xi ma te. Spec ifica ti ons and app ea ran ce are subj ec t to cha nge with ou t noti ce . *1 Whe n the stan dby mode is set to eco, netw or k func ti on s such as powe r on over the LAN netw ork will not ope rat e, and the se ri al out pu t term i-

nal cann ot be used . Also , onl y cer tai n com mands can be receiv ed for exte rn al cont rol usin g the ser ia l termin al . *2 Mea su remen t, me as uri ng cond iti on s, an d met hod of nota tio n all comp ly wit h ISO 21118 inte rn at ion al stan dar ds . *3 WUX GA resol ut io n is supp or te d only when the sign al s are com pl ia nt wit h VES A CVT-RB (Coo rdi na ted Vide o Timi ng -R edu ce d Bla nki ng ). *4 Wit h leg s at sho rte st positio n. *5 Pro tr udi ng part s not inc lu de d. *6 The oper at ing temp er atu re ra ng e is 0°C to 40° C (32 °F to 104 °F ) whe n the fan cont rol is set to Hig h Alti tu de mo de (f or al titud es from 1,4 00 m to

2,7 00 m (4, 59 3 ft to 8,858 ft) abov e sea lev el ). Al so , if the amb ie nt te mpera tu re exc ee ds 40 °C (1 04° F) (35° C (95° F) in High Al titud e mod e) whe n

the proj ect or is bein g used with Lamp Se lect set to Dual an d Lam p Powe r set to High , the lig ht outpu t may be reduc ed appro xi ma tel y 20% to

pro te ct the proj ect or. *7 Ope ra ti on ran ge diffe rs depe ndi ng on environ ments .

As of J une 201 1

SFD11M 002

3 / 1 4

S P E C F I L E

2 3 45

DLP™Projectors

Dimensi ons

42 3 (16 -2 1/ 32)

46 6 (18 -1 1/ 32)

9 (1 1/3 2)

43 ( 1-1 1/ 16 )

PT-DX800S/DX800K/DX800LS/DX800LK

uni t : m m (in ch) NOT E: This il lu str at io n is not dra wn to scal e. The illu st rat io n sho ws the PT-DX8 00S /D X8 00K .

15 5 (6- 3/ 32 )

77 .5

416 (16-3/8)

498 (19-19/32)

(3 -1 /16 )20 ( 25/ 32 )

17 5 (6- 7/ 8)

21 ( 13/ 16 )

Terminals

G/Y

R/P

S-VIDEO IN

VIDEO IN RGB1 IN RGB2 IN DVI-D I N

LAN

IN OUT

REMOTE 1 REMOTE 2

6 78 9 10 11

B/P

IN OUT SERIAL

SYNC/HD

1 Vi deo input

2 S-Vid eo input

3 RGB 1 input

4 RGB 2 Input

5 DVI-D input

7 Remote 1 i npu t

8 Remote 1 o utp ut

9 Remote 2 i npu t

10 Se ria l in put

11 Se ria l ou tput

6 LAN connecto r

As of J une 201 1

SFD11M 002

4 / 1 4

S P E C F I L E

DLP™Projectors

PT-DX800S/DX800K/DX800LS/DX800LK

Standard setting -up pos ition

Upper edge of projected image

Projected image

Lower edge of projected image

Projected image

*1 Wh en the lens protr ud es to the max imu m.

(1 3-3 /8–

34 0–4 20

16 -17 /32 )

41 6–4 96

(6-10/16)

168

100 (3-15/16)

400

(15-3/4)

255 (10-1/32)

10 0

(3 -15 /16 )

A: 84 mm (3-5 /1 6˝ ) with th e ET-DLE 08 0

43 mm (1-11/1 6˝ ) with the supp li ed le ns 44 mm (1-23/3 2˝ ) with the ET-DLE 15 0 45 mm (1-25/3 2˝ ) with the ET-DLE 25 0 51 mm (2˝ ) wit h the ET-D LE350

(1 6-3 /8–

34 4

(1 3-1 7/3 2 )

95 mm (3-3/4˝ ) with the ET-DLE45 0

19 -17 /32 )

27 mm (1-1/16 ˝ ) with the ET-DLE055

*2 Ad jus ta bl e in 40 mm (1-9 /1 6˝ ) step s.

NOT E:

Ill us tr ati on s sho w the pro je cto r ins ta lle d usi ng opti ona ET-PK D5 6H an d an option al lens.

Thi s ill us tra ti on is not dra wn to sca le .

l ceil in g mou nt bra ck et

uni t : m m (in ch)

C a u t io n :

• All c on struction work should be done by a qualified technician.

• When mounting to the ceiling, use the special mounting brac ket. To prev en t the p roject or from swaying o r dropping, attach the wire betw ee n the m ou nt in g brack et and the ceiling.

As of J une 201 1

SFD11M 002

5 / 1 4

+ 9 hidden pages