S P E C F I L E
The PT-DW7 40L S and PT- DW 740 LK are not equ ip ped with a len s.
Pro du c t Nu mb e r : PT-DW740S/DW740K
PT-DW740LS/DW740LK
Pro du c t Na me : DLP
As of J uly 201 2. Specifications and appearance are subject to change without not ice.
SFD 12M 008
™
Projectors
1 / 1 6
S P E C F I L E
DLP™Projectors
PT-DW740S/DW740K/DW740LS/DW740LK
Specifi cat ions
Main unit
Power supply
Power consumption 120 V AC, 60 Hz
220 – 240 V AC, 50/60 Hz
DLP™ chip Panel size
Display method
Pixels
Lens PT-DW740S/DW740K
PT-DW740LS/DW740LK
Lamp
Screen size
Brightness*
Center-to-corner uniformity*
Contrast*
Resolution
Scanning frequency HDMI/DVI-D
Optical axis shift
Keystone correction range
Installation
Terminals HDMI IN
2
2
2
RGB
YPBPR (YCBCR)
Video/S-Video
DVI-D IN
120 V AC, 7.5 A, 50/60 Hz
220 – 240 V AC, 4.3 A, 50/60 Hz
790 W (830 VA) (0.2 W with STAND BY MOD E set to ECO*1, 6Wwith
STANDB Y MODE set to NORMA L)
760 W (950 VA) (0.3 W with standby mode set to eco*1, 8 W with
STANDB Y MODE set to NORMA L)
16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
DLP™ chip × 1, DLP™ system
1,024,000 (1,280 × 800) × 1, total of 1,024,000 pixels
Powered zoom/focus lenses (1.8 – 2.5:1), F 1.7–1.9, f 25.6 – 35.7 mm
Optional powered zoom/focus lenses and fixed-focus lens
300 W (max. 310 W) UHM lamps (× 2) (dual lamp system)
1.27–15.24 m (50–600 inches) (1.27–5.08 m (50–200 inches) with the
ET-DLE055), 16:10 aspect ratio
7,000 lumens (dual lamp, LAMP M ODE: NO RMA L)
90%
2,500:1 (full on/full off, CONTRA ST M ODE : H IGH, brightness: 3,500 lumens)
1,280 × 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 × 800 pixels.)
fH: 15–91 kHz, fV :50– 85 Hz, dot clock: 25–162 MHz or lower
fH: 15 – 91 kHz, fV:50– 85 Hz, dot clock: 162 MHz or lower
480i (525i): fH 15.75 kHz; fV 60 Hz,
576i (625i): fH 15.63 kHz; fV 50 Hz,
480p (525p): fH 31.50 kHz; fV 60 Hz,
576p (625p): fH 31.25 kHz; fV 50 Hz,
720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
720 (750)/50p: fH 37.50 kHz; fV 50 Hz,
1035/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
1080/25p: fH 28.13 kHz; fV 25 Hz,
1080/24p: fH 27.00 kHz; fV 24 Hz,
1080/24sF: fH 27.00 kHz; fV 48 Hz,
1080/30p: fH 33.75 kHz; fV 30 Hz,
1080/60p: fH 67.50 kHz; fV 60 Hz,
1080/50p: fH 56.25 kHz; fV 50 Hz
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Vertical: +60% (powered), horizontal: ±10% (powered)
NOT E: Opti cal axis shif t func ti on ca nnot be ope ra ted when used wi th th e ET-DLE 05 5.
Vertical: ±40° (±30° with the ET-DLE055 and ET-DLE080)
Ceiling/floor, front/rear
HDMI 19-pin × 1, HDCP compatible
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480) – WUXGA*3(1,920 × 1,200), compatible with non-
interlaced signals only, dot clock: 25–162 MHz
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link
only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480) – WUXGA*3(1,920 × 1,200), compatible with non-
interlaced signals only, dot clock: 25–162 MHz
As of J uly 201 2
SFD12M 008
2 / 1 6
S P E C F I L E
DLP™Projectors
PT-DW740S/DW740K/DW740LS/DW740LK
RGB 1 IN
R, G, B
B, PR (Y, CB, CR )
Y, P
RGB 2 IN
R, G, B
Y, PB, PR (Y, CB, CR )
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
Power cord length
Cabinet materials
Dimensions (W × H × D) PT-DW740S/DW740K
PT-DW740LS/DW740LK
Weight PT-DW740S/DW740K
PT-DW740LS/DW740LK
Operation noise*
2
Operating temperature
Operating humidity
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOT E: HD/S YNC , and VD term ina ls do not acc ept tri- level sync signa ls .
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
D-sub HD 15-pin (female) × 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOT E: HD/S YNC , and VD term ina ls do not acc ept tri- level sync signa ls .
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
BNC × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
D-sub 9-pin (male) × 1 for link control (RS-232C compliant)
M3 jack × 1 for wired remote control
M3 jack × 1 for link control
D-sub 9-pin (female) × 1 for external control (parallel)
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
3.0 m (9 ft10 in)
Molded plastic
498 × 175*4× 466 mm (19-19/32 × 6-7/8*4× 18-11/32 inches)
(with supplied lens)
498 × 175*4× 432 mm (19-19/32 × 6-7/8*4× 17 inches)
(without lens)
Approx. 16.3 kg (35.9 lbs) (with supplied lens)
Approx. 15.4 kg (34.0 lbs) (without lens)
39 dB (dual lamp operation, LAM P MO DE: NO RMAL ),
35 dB (dual lamp operation, LAM P MO DE: EC O)
0 – 45 °C (32 – 113 °F)*
5
20%– 80% (no condensation)
Remote control unit
Power supply
Operation range*
6
Dimensions (W × H × D)
Weight
3 V DC (R6/AA type battery × 2)
Approx. 30 m (98 ft5 in) when operated from directly in front of the
signal receptor
51 × 176 × 23 mm (2 × 6-15/16 × 29/32 inches)
Approx. 134 g (4.7 oz) (including batteries)
As of J uly 201 2
SFD12M 008
3 / 1 6
S P E C F I L E
DLP™Projectors
Supplied accessories
Optional accessories
Zoom lens (0.8–1.0:1)
Zoom lens (1.4–2.0:1)
Zoom lens (2.4 – 3.8:1)
Zoom lens (3.8 – 5.7:1)
Zoom lens (5.6 – 9.0:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket
Replacement lamp unit
Replacement filter unit
PT-DW740S/DW740K/DW740LS/DW740LK
Power cord (× 1)
(× 2 for PT-DW740ES/DW740EK/DW740ELS/DW740ELK)
Power cord security lock (× 1)
Wireless/wired remote control unit (× 1)
Batteries for remote control (R6/AA type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
ET-DLE080
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
ET-LAD60A
ET-LAD60AW (Twin Pack)
ET-EMF300
Wei ght s and dime nsi on s sho wn are appro xi ma te. Spec ifica ti ons and app ea ran ce are subj ec t to cha nge with ou t noti ce .
1 Whe n the stan dby mode is set to eco , netw or k func tions such as powe r on over the LAN network will no t ope rat e, and the se ri al out pu t termi-
*
nal cann ot be used . Also , onl y cer tai n com mands can be receiv ed for exte rn al cont rol usin g the ser ia l termin al .
2 Measu remen t, me as uri ng cond iti on s, an d met hod of nota tion all comp ly wit h ISO 2111 8 inte rn at ional stan dar ds .
*
3 WUX GA resol ut io n is supp or te d only when the sign al s are com pl ia nt wit h VES A CVT-RB (Coo rdi na ted Vide o Timi ng -R edu ce d Bla nki ng ).
*
4 Wit h leg s at sho rte st posi tio n.
*
5 The oper at ing temp er atu re ra ng e is 0 °C to 40 °C (32 °F to 104 °F) when the fan co ntrol is se t to Hig h Alti tu de mo de (f or al titud es from 1,4 00 m
*
to 2,7 00 m (4, 59 3 ft to 8,858 ft) abov e sea lev el ). Al so , if the amb ie nt te mpera tu re exc ee ds 40 °C (104 °F) (35 °C (95 °F) in High Alti tu de mod e)
whe n t he proje ct or is bein g used with Lamp Se le ct set to Dual and Lamp Powe r set to High , the lig ht output may be reduc ed appro xi ma tel y
20% to prot ect the pro jec to r.
6 Ope ra ti on ran ge diffe rs depe ndi ng on environ ments .
*
As of J uly 201 2
SFD12M 008
4 / 1 6
498 (19-19/32)
416 (16-3/8)
423 (16-21/32)
466 (18-11/32)
43 (1-11/16)
9 (11/32)
77.5
(3-1/16)20 (25/32)
155 (6-3/32)
175 (6-7/8)
21 (13/16)
S P E C F I L E
DLP™Projectors
Dimensi ons
PT-DW740S/DW740K/DW740LS/DW740LK
uni t : m m (in ch)
NOT E: This il lu str at io n is not dra wn to sc al e.
The illu st rat io n sho ws the PT-DW7 40S /D W740K .
Terminals
1 LAN c onn ector
2 Video input
3 S-Video input
4 RGB 1 input
5 HDMI input
6 DVI-D input
7 Remote 1 input
8 Remote 1 outpu t
9 Remote 2 input
10 Se rial input
11 Se rial output
12 RG B 2 Inp ut
As of J uly 201 2
SFD12M 008
5 / 1 6