Panasonic PT-DS20KU Product Sheet
S P E C F I L E
The PT-DS2 0K is not equi pp ed wit h a lens .
Pro du c t Nu mb e r : PT-DS20K
Pro du c t Na me : 3-Chip DLP
™
Projector
As of S eptem ber 201 2. Specifications and appearance are subject to change without notice.
SFD 12M 006 -1
1 / 1 8
S P E C F I L E
3-Chi p DLP™Projector
Specifi cat ions
Main unit
Power supply
Power consumption
DLP™ chip Panel size
Display method
Pixels
Lens
Lamp
Screen size
Brightness*
Center-to-corner uniformity*
Contrast*
Resolution
Scanning frequency SDI
2
2
2
HDMI/DVI-D
RGB
YPBPR (YCBCR)
Video/S-Video
P T-DS20K
200–240 V AC, 12 A, 50/60 Hz (3-wire single-phase)
2,300 W (2,350 VA) (0.3 W with STANDBY MO DE set to ECO.*19Wwith
STANDB Y MODE set to NORMA L.),
max. 7,848 BTU (without light output: 7,585 BTU )
24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ chip × 3 (R, G, B), DLP™ projection system
1,470,000 (1,400 × 1,050) × 3, total of 4,410,000 pixels
Optional powered zoom/focus lenses
465 W UHM lamps (× 4) (four lamp system)
1.78–15.24 m (70–600 inches) (1.78–7.62 m (70 –300 inches) with the
ET-D75LE50), 4:3 aspect ratio
20,000 lumens (four lamp)
90%
10,000:1 (full on/full off, in dynamic iris 3 mode)
1,400 × 1,050 pixels (Input signals that exceed this resolution will be
converted to 1,400 × 1,050 pixels.)
Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 372 compliant: 1080/50i, 1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p,
Dual-link HD-SDI signal (X´Y´Z´ 4:4:4 12-bit):
SMPTE ST 372 compliant: 2048 × 1080/24p, 2048 × 1080/24sF,
3G-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE ST 424 compliant: 1080/50i, 1080/60i, 1080/25p, 1080/24p,
1080/24sF, 1080/30p,
3G-SDI signal (YPBPR 4:2:2 10-bit):
SMPTE ST 424 compliant: 1080/50p, 1080/60p,
HD-SDI signal (YPBPR 4:2:2 10-bit):
SMPTE ST 292 compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p,
SD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE ST 259 compliant: 480i, 576i
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480) – WUXGA (1,920 × 1,200), compatible with
non-interlaced signals only, dot clock: 25 –162 MHz
Horizontal: 15–100 kHz, vertical: 24– 120 Hz,
dot clock: 162 MHz or less
480i (525i): fH 15.75 kHz; fV 60 Hz,
576i (625i): fH 15.63 kHz; fV 50 Hz,
480p (525p): fH 31.50 kHz; fV 60 Hz,
576p (625p): fH 31.25 kHz; fV 50 Hz,
720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
720 (750)/50p: fH 37.50 kHz; fV 50 Hz,
1035/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
1080/25p: fH 28.13 kHz; fV 25 Hz,
1080/24p: fH 27.00 kHz; fV 24 Hz,
1080/24sF: fH 27.00 kHz; fV 48 Hz,
1080/30p: fH 33.75 kHz; fV 30 Hz,
1080/60p: fH 67.50 kHz; fV 60 Hz,
1080/50p: fH 56.25 kHz; fV 50 Hz
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
As of S eptem ber 201 2
SFD12M 006 -1
2 / 1 8
S P E C F I L E
3-Chi p DLP™Projector
Optical axis shift Vertical
Horizontal
Keystone correction range
Keystone correction range when using the
optional upgrade kit ET-UK20*
Installation
Terminals SDI IN 1
3
SDI IN 2
HDMI IN
DVI-D IN
RGB 1 IN
R, G, B
B, PR (Y, CB, CR )
Y, P
S-Video signal
RGB 2 IN
R, G, B
Y, PB, PR (Y, CB, CR )
VIDEO IN
3D SYNC 1 IN/OUT
3D SYNC 2 OUT
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
P T-DS20K
±50% (±40% with the ET-D75LE6) from center of screen, powered
±30% (±20% with the ET-D75LE6) from center of screen, powered
NOT E: Opti cal axis shif t func ti on ca nnot be ope ra ted when used wi th th e
ET-D7 5L E50 .
Vertical ±40°, horizontal ±15°
(vertical ±22° and horizontal ±15° with the ET-D75LE50,
vertical ±28° and horizontal ±15° with the ET-D75LE6)
Vertical ±45°, horizontal ±40°
(vertical ±22° and horizontal ±15° with the ET-D75LE50,
vertical ±28° and horizontal ±15° with the ET-D75LE6,
vertical ±40° and horizontal ±40° with the ET-D75LE10/D75LE20)
Ceiling/floor, front/rear
BNC × 1,
Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-A)
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
BNC × 1,
Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-B)
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
HDMI 19-pin × 1, Deep Color, compatible with HDCP,
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 × 480) –WUXGA*4(1,920 × 1,200),
dot clock: 25 MHz–162 MHz
NOT E: Comp ati bl e wit h non- in te rla ce d signal s onl y.
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible,
for single link only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480) –WUXGA*4(1,920 × 1,200),
dot clock: 25 MHz–162 MHz
NOT E: Comp ati bl e wit h non- in te rla ce d signal s onl y.
BNC ×5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOT E: SYNC /HD and VD ter mi nal s do not accept tri -l evel syn c sig nal s.
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub HD 15-pin (female) ×1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOT E: SYNC /HD and VD ter mi nal s do not accept tri -l evel syn c sig nal s.
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
BNC × 1, 1.0 Vp-p, 75 ohms
BNC × 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA
BNC × 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
D-sub 9-pin (male) × 1 for link control
M3 jack × 1 for wired remote control
M3 jack × 1 for link control
As of S eptem ber 201 2
SFD12M 006 -1
3 / 1 8
S P E C F I L E
3-Chi p DLP™Projector
REMOTE 2 IN
LAN
Power cord length
Cabinet materials
Dimensions (W × H × D):
7
Weight*
Operation noise*
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range*
Dimensions (W × H × D)
Weight
Supplied accessories
2
9
P T-DS20K
D-sub 9-pin × 1 for external control (parallel)
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant
with PJLink™ (class 1)
3.0 m (9 ft 10 in)
Molded plastic
620 × 291*5× 800*6mm
(24-7/16 × 11-15/32*5× 31-1/2*6inches) (without lens)
Approx. 43 kg (94.8 lbs) (without lens)
49 dB (quad lamp operation)
0°– 45°C (32°–113°F)*
10%– 80% (no condensation)
3 V DC (AA type battery × 2)
Approx. 30 m (98 ft 5 in) when operated from directly in front of the
signal receptor
51 × 176 × 28 mm (2 × 6-15/16 × 1-3/32 inches)
Approx. 134 g (4.7 oz) (including batteries)
Power cord with security lock (× 1)
Wireless/wired remote control unit (× 1)
Batteries for remote control (AA type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
8
Optional accessories
Zoom lens (1.0–1.2:1)
Zoom lens (1.4 – 1.8:1)
Zoom lens (1.8–2.6:1)
Zoom lens (2.6–5.1:1)
Zoom lens (5.0–8.0:1)
Zoom lens (7.9–15.0:1)
Fixed-focus lens (0.8:1)
Lens motor cover
Ceiling mount bracket
ET-D75LE6
ET-D75LE10
ET-D75LE20
ET-D75LE30
ET-D75LE40
ET-D75LE8
ET-D75LE50
ET-D75MC1
ET-PKD510H (for high ceilings)
ET-PKD510S (for low ceilings)
Frame
Smoke cut filter
Upgrade kit
Replacement lamp unit
ET-PFD510
ET-SFR510
ET-UK20
ET-LAD510 (one bulb)
ET-LAD510F (a set of four bulbs)
Replacement lamp unit for portrait mode
ET-LAD510P (one bulb)
ET-LAD510PF (a set of four bulbs)
Replacement filter unit
Wei ght s and dime nsi on s sho wn are appro xi ma te. Spec ifica ti ons and app ea ran ce are subj ec t to cha nge with ou t noti ce .
1 Whe n the stan dby mode is set to eco , netw or k func tions such as powe r on over the LAN network will no t ope rat e, and the se ri al out pu t termi-
*
nal cann ot be used . Also , onl y cer tai n com mands can be receiv ed for exte rn al cont rol usin g the ser ia l termin al .
2 Measu remen t, me as uri ng cond iti on s, an d met hod of nota tion all comp ly wit h ISO 2111 8 inte rn at ional stan dar ds .
*
3 Up to a tota l of ±55 ° dur ing simu lta ne ou s hori zo nt al and vert ic al cor re cti on .
*
4 WUX GA resol ut io n is supp or te d only when the sign al s are com pl ia nt wit h VES A CVT-RB (Coo rdi na ted Vide o Timi ng -R edu ce d Bla nki ng ).
*
5 Wit h leg s at sho rte st posi tio n.
*
6 Exc lu di ng the opti on al len s.
*
7 Ave ra ge va lue (exc lu din g the opti ona l len s) . May dif fer depe nd ing on mode ls .
*
8 The oper at ing temp er atu re ra ng e is 0 °C to 40 °C (32 °F to 104 °F) when the
*
to 2,7 00 m (4, 59 3 ft to 8,858 ft) abov e sea lev el ). Wh en th e proj ec to r is used with the ET-SFR 51 0 Smok e Cut Filt er, the op er ati ng temp era tu re
ran ge is 0 °C to 35 °C (32 °F to 95 °F), an d the pr oje ct or ca nn ot be use d in pla ce s at high alti tud e. The ope rat in g tem per at ure rang e is 0 °C to
40 °C (32 °F to 104 °F) when th e ET-LAD 51 0P/ LA D5 10P F lam p is mou nte d and the proj ec tor is used in port rai t con fi gur at io n. The oper ating temper at ure ra nge is 0 °C to 35 °C (32 °F to 95 °F) whe n the
to 8,8 58 ft) abo ve sea leve l) . When the projec to r is used with the ET-SFR 51 0 Smo ke Cut Filt er, the opera ting tem pe ra tur e ran ge is 0 °C to 30 °C
(32 °F to 86 °F).
9 Ope ra ti on ran ge diffe rs depe ndi ng on environ ments .
*
ET-EMF510
FAN C ONTR OL is set to HIGH A LTITU DE MOD E ( fo r alt itu de s from 1,40 0 m
FAN C ONTR OL is set to HIGH A LTITU DE MOD E ( fo r alt itu de s from 1,40 0 m to 2,700 m (4 ,59 3 ft
As of S eptem ber 201 2
SFD12M 006 -1
4 / 1 8
800 ( 31-1/2)
S P E C F I L E
3-Chi p DLP™Projector
Dimensi ons
73 0 (28 - 3 / 4 )
70
( 2- 3 / 4 )
244
( 9-19 / 32 )
620 (24-13/32)
244
( 9-19 / 32 )
P T-DS20K
uni t : m m (in ch)
NOT E: This il lu str at io n is not dra wn to scal e.
177
( 6 - 31 / 32)
29 1 ( 11-15/ 32 )
36
(1-13 / 3 2 )
47
(1-27/ 32)
608
( 23 -15 / 16 )
Terminals
1
23 4 5
1 Remote 1 input
2 Remote 1 output
3 Remote 2 input
4 Serial inp ut
5 Serial out put
6 SDI 1 input
6 7 8 9 10 11 12 13 14 15
7 SDI 2 input
8 HDMI input
9 RGB 1 input
10 RGB 2 Input
11 DVI-D input
12 Vide o inp ut
13 3D sync 1 input /ou tput
14 3D sync 2 outpu t
15 LAN con nector
As of S eptem ber 201 2
SFD12M 006 -1
5 / 1 8
S P E C F I L E
Upper edge of projected image
432
(18)
∅
60.5
(2-3/8)
298
(11-23/32)
*
1
*
2
Lower edge of projected image
Projected image
L
L
L
419– 539
(16-1/2–
21-7/32)
*
2
560– 680
(22-1/16–
26-25/32)
157
(6-3/16)
314
(12-3/8)
157
(6-3/16)
87.5
(3-7/16)
175
(6-7/8)
87.5
(3-7/16)
Projected image
HH
3-Chi p DLP™Projector
Standard s ett ing-up position
P T-DS20K
*1 Wh en the lens protr ud es to the
max im um .
212 mm (8-1 1/ 32) with the ET-D75 LE 6
125 mm (4-2 9/ 32) with the ET-D75 LE 10
121 mm (4-3 /4 ) with the ET-D7 5LE 20
121 mm (4-3 /4 ) with the ET-D7 5LE 30
124 mm (4-7 /8 ) with the ET-D7 5LE 40
254 mm (10) with th e ET-D75 LE 8
203 mm (8) wit h the ET-D 75L E5 0
*2 Adj us ta ble in 40 mm (1-9 /1 6) ste ps .
uni t : m m (in ch)
NOT E:
Ill us tr ati on s sho w the pro je cto r ins talle d
usi ng opti ona l cei li ng mou nt brac ket
ET-PK D5 10H and an opt io nal lens .
Thi s ill us tra ti on is not drawn to sca le .
C a u t io n :
• All c on struction work should be done by a qualified t ec hn ician.
• When mounting to the ceiling, use the special m ou nt in g bracket . To prevent the p ro je ct or from sway in g or drop ping, attach the wire that is included with the proj ector between the mount in g bracket a nd the ceiling.
As of S eptem ber 201 2
SFD12M 006 -1
6 / 1 8
Loading...