Specifications and Main Features
- Model Numbers: PT-D9500U, PT-D9600U
- AC Voltage Supply: 200 V — 240 V 50 Hz/60 Hz
- Source Of Navigation: 1 X 1,600 W xf lamp
- Projected Picture Size: Usable 110 inch (2.5 m ) to large 16 inch != which covers 602 inch
- DMD: 0.9 inch for PT-D9500U model and 1.1 inch for PT-D9600U model DMD
- Other English Dots: PT-D9500U: 1,024 X 768 D, PT-D9600U: 1,280 X 1024 D
- Clock Frequency Range: 20 MHz Hz to 162 MHz
- APPPT RatioPTD9500U – 4:3, PT-D9600U: 5:4
- Supported Input Formats: RGB signals, high definition television signals, NTSC, PAL, SECAM , Analog & Digital Video Standards
- RS-323C: Yes, for control from a personal computer or a signal selector
- Method Of Projection: Ceiling/Floor/Rear
- Horizontal Correction: Yes, trapezium干 Bias是可行的.
- Ocular Axis Adjustment: ZOOM Laser Type and Positioning of lens
- ANC: Yes
- Self-diagnosis Display Function: Digitale error code display function: Two digit error code
- Storage Capacity: Signal sources are registered not over than 64 levels.
- Input Modules: Requirement (exclusive)
- Physical Dimensions Projector weight only 96Kgs 211.20lbs and Ceiling mount bracket is 135Kg 297lbs
Frequently Asked Questions
Q1: What are the model numbers of this projector?
A1: The model numbers are PT-D9500U and PT-D9600U.
Q2: How many volts do you need to power the projector?
A2: The projector is able to function if there is a supply of alternating current with 200 volts to 240 volts along with a capacity of 50Hz/60Hz.
Q3: What is the brightness rating of the projector?
A3: In order to achieve a higher level of brightness in the output, this projector is equipped with a xenon lamp that has 1,600 power ratings.
Q4: How big can the image that you project on the wall.
A4: In terms of the image size that can be projected, this projector can project images as little as 100 inches(2.5m) in size and as large as 600 inches(15 m) in size.
Q5: Can it read RGB signals?
A5: It can accept RGB signals, high or standard definition TVs and other video formats such as NTSC, PAL and SECAM.
Q6: Can I use a computer to control my projector.
A6: Yes, there is a provision of an RS-232C connector in the projector that allows the management of the device through a personal computer.
Q7: Why do the images that are projected change at times?
A7: Trapezium distortion can occur which can be fixed with keystone correction, A lens focus and position adjustment feature can also optically shift the center axis of a lens. One advantage of the projector is that it has a built in self-diagnostic display function that helps catch failures early on.
Q8: How many other types of signals can the projector recognize.
A8: The projector is capable of recognizing up to 64 different types of input signal sources.
Q9: Are there some optional accessories which need to be procured in order to operate the projector?
A9: Certainly, the projector lens and input module is available separately and is necessary for use.
Q10: How much does a projector weigh?
A10: The weight of the projector is 96 kg (211.2 lbs) if used alone and 135 kg (297 lbs) when used along with the ceiling mount bracket.
User Manual
Loading...