Panasonic PN25248-SG Specification
Model
Name
Model
No.
GA-AS24TPoE+
Product Specification
PN25248-SG
401-25248-SG-SP02
Page 1 of 7
1. Summary
GA-AS24TPoE+ has 26 ports which are 10BASE-T/100BASE-TX/1000BASE-Tcompatible ports.
Ports 1 to 24 (twisted pair ports) support IEEE802.3at PoE power supply functions.
2. Feature
（1） Ports 1 to 26 (twisted pair ports) are 10BASE-T/100BASE-TX/1000BASE-Tcorresponding to auto-negotiation.
（2） The twisted pair ports 1 to 24 can supply power conforming with IEEE802.3at. They can supply a maximum of 30 W of power per port,
and the device total can supply a maximum of 168 W of power.
（3） All of the twisted pair ports are equipped with straight/cross cable automatic detection functions. Straight cables can be used to make
interconnections without distinctions between the terminals and network devices having to be made.
(The factory default is for ports 1 to 24 to have MDI-X be fixed.)
（4） If equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet functions (hereinafter EEE), and if data is transmitted when
linked up, the energy efficient state will be moved to, whereas each port can suppress power consumption.
（5） Automatically detects the connection states via the equipped energy efficiency mode, and suppresses power consumption to required
levels.
（6） VLAN function allows free grouping of up to 256 VLANs.
（7） The IEEE802.1p compatible QoS function is supported.
（8） Has an Internet Mansion function, which ensures security between each door.
（9） The Switching Hub settings can be configured via a web browser. Since the IP address is not set when the Switching Hub is shipped
from the factory, it can be changed by connecting the computer and the Switching Hub which have the ZEQUO assist Plus that is on
the CD-ROM installed on them with the twisted pair cables.
Date issued
Date revised
Deｃ. 22, 2016
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Model
Name
Model
No.
GA-AS24TPoE+
PN25248-SG
3. Rated/Environmental Conditions
3－1. Power supply
3－2. Power consumption
3－3. Operating environment
3－4. Storage environment
3－5. EMC compliance
3－6. Safety compliance
3－7. Environment compliance
401-25248-SG-SP02
Product Specification
Page 2 of 7
AC100-240V, 50/60Hz, 4.0A (with a built-in power supply)
Normally, Max.209W （23.7W when not supplying power）, Min.13.8W
Temperature: 0 - 40℃（※）
Humidity: 20 - 80%RH （no condensation）
※If the supply power for the entire device is going to be used at
80 W or less, corresponds to 0 to 50℃.
Temperature: -20 - 70℃
Humidity: 10 - 90%RH （no condensation）
CISPR 22 Class A, EN 55022 Class A, EN 55032 Class A
AS/NZS CISPR22 Class A
VCCI Class A
EN 61000-3-2, EN 61000-3-3
CISPR 24, EN 55024
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
IEC 60950-1
EN 60950-1
RoHS compliant
4. Form
4－1. Form and materials/colors
4－2. Mass（Weight） 3,800g
5. Hardware Specifications
5－1. Interface
Dimensions ：44mm（Height）×440mm（Width）×257mm（Depth）
（Excluding protruding sections）
Case material ：SECC
Color : Main unit: Green 03, Front face: Black 03,
Face plate label: Black 04
Twisted pair port 1-26 ：RJ45 connector ※1
Transmitting and receiving network system ：IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
Energy Efficient Ethernet ：IEEE802.3az (LPI) ※2
Transmission speed ：10/100Mbps full/half duplex,
1000Mbps full duplex,
Compatible cable ：Twisted pair cable
（At least equivalent to EIA/TIA568 category 5e）
If there is Category 3 cable used in a
connection, the communication at a
speed of 10Mbps can not be established.
You must use category 5e or higher
crossover cable.
Maximum transmission distance ：100m
Auto-Negotiation ：Communication speed and full/half duplex
are automatically recognized.
The setting can be fixed to 10Mbps, 100Mbps,
1000Mbps and full duplex or half duplex.
Up to 168 W of power can be supplied to ports 1 to 24 in total.
(Maximum power supplied to a port: 30.0W)
※1 Automatically detects the connection states via the equipped Power Saving Mode,
and suppresses power consumption to required levels.
Factory default : Half
※2 Port 1-24 equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet
functions(hereinafter EEE), and if data is transmitted when linked up, the energy
efficient state will be moved to, whereas each port can suppress power consumption.
Factory default : Enable
Date issued
Date revised
Deｃ. 22, 2016
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Model
Name
Model
No.
GA-AS24TPoE+
PN25248-SG
5. Hardware Specifications
401-25248-SG-SP02
Product Specification
Page 3 of 7
5－2. Switching mode
5－3. LED display
Switching method ：Store and Forward
Switching capacity ：52.0Gbps
Packet transfer capability ：Non-blocking
Max 14,880pps/port（10Mbps）
Max 148,800pps/port（100Mbps）
Max 1,488,000pps/port（1000Mbps）
MAC Address table ：Max 8K entry/unit
Buffer memory ：512K Byte/unit
Flow control ：half-duplex Back pressure
full-duplex IEEE802.3x
Aging timeout ：10to 1,000,000 sec.
Jumbo frame supported ：9KB
Transmittable frames ：EAP, BPDU
HOL Blocking
（1）POWER（Power）LED
Green Light ：Power is ON
Off ：Power is OFF
（2）STATUS (status) LED
Green Light ： System is normally operating
Green Blink : After powering on, and the system startup is completed,
blinks for five minutes
Orange Light ： System is starting up
Orange Blink： System is malfunctioning
（3） PoE LIM. (PoE limit) LED
Off : Supplies power in a range of 0 – 161 W
Green Light : Supplies power in a range of 161 W – 168 W
Green Blink : When the requested power supply capacity exceeds 168 W
(overload of the device overall)
（4） Port LED (Left)
LINK/ACT (ports 1-26) LED
Green Light : Link is established.
Green Blink : Data is being sent/received.
Off : No terminal is connected.
5－4. Cascade connections
5－5. FAN Installed
Date issued
Date revised
Deｃ. 22, 2016
Oct. 1, 2020
（5） Port LED (Right)
PoE (ports 1-24) LED
Green Light : Power is supplied normally.
Green Blink : Overload power supply
Off : Power is not supplied or PoE receiving equipment is not connected.
Port 1-26 corresponding to the Auto MDI / MDI-X
(Allowed change by the setting for the application)
The factory default is for ports 1 to 24 are fixed to be MDI-X.
Panasonic Life Solutions Networks Co., Ltd.
Loading...