Panasonic Palmcorder IQ PV-D326, Palmcorder IQ PV-D426 Operating Instructions Manual

Panasonic

PalmcoPdcp _[Q ®

Camcorder

Operating Instructions

(PV-D426 shown)

PV-D326
PV-D426

Beforeattemptingto connect, operate or adjust thisproduct,please readtheseinstructionsthoroughly.

Spanish Quick Use Guide is included.

Gufa para r_ipida consulta en espafiol est_i incluida.

VQTW0593

Thank you for choosing Panasonic!

You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, we're sure it

will bring you and your family years of
enjoyment. Please take time to fill in the

information at right. The serial number is on

the tag located on the underside of your

Palmcorder. Be sure to retain this manual
as your convenient Palmcorder information

source,

rDate of Purchase

Dealer Pumhased From
Dealer Address
Dealer Phone No.

Model No.
Serial No.

1 pc. AC Adaptor
(PV-A17)

with DC P_

Cable

These accessories are provided in order to set up or use your Palmcorder.

1 pc. Battery Pack 1 pc. Audio/Video 1 pc. Shoulder Strap
(PV-BP18) Cable (VJAW0032) (VYCW0108)

1 pc. VHS PlayPak

(PV-P1/VYMW0009)
and one "AA" battery

1pc. CR2025 Clock

Battery (VSBW0004)
(installed in Palmcorder)

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Your Compact VHS Palmcorder is designed to record This Palmcorder is equipped with the HQ System to

and play back in Standard Play (SP) and Super Long provide excellent video pictures, and is compatible

Play (SLP) modes. You can also play a Compact VHS with standard VHS equipment.

Palmcorder recording on your VHS VOR using the It is recommended that only cassette tapes that have

VHS PlayPak supplied, been tested and inspected for use in VCR machines

with the _ and/or _ mark be used.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

,q

This symbol warns the user that

uninsulated voltage within the unit may
have sufficient magnitude to cause electric
shock. Therefore, it is dangerous to make
any kind of contact with any inside part of
this unit.

This symbol alerts the user that important

literature concerning the operation and
maintenance of this unit has been included

Therefore, it should be read carefully in

order to avoid any problems.

The above markings are located on the appliance bottom cover.

2

1. Read Instructions -- All the salety and opefatin 9
instructions should be read before the unit is
operated.

2, Retain Instructions -- The safety and operating

instructions should be retained for future reference.

3. Heed Warnings -- All warnings on the unit and in
the operating instructions should be adhered to.

4. Follow Instructions -- All operating and

maintenance instructions should be followed.

5. Cteanlng -- Unplug this video unit from the watl
outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a dry cloth for cleaning.

6. Attachments -- Do not use attachments not

recommended by the video product manufacturer
as they may be hazardous.

7. Water and Moisture -- Do not use this video unit

near water -- for example near a bath tub, wash

bowl, kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool, and the like.

8. Accessories -- Do not place this video unit on an

unstable cart, stand, tripod, bracket, or table. The

video unit may fall, causing serious injury to a child
or adult, and serious damage to the unit. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
video unit. Any mounting of the unit should follow

the manufacturer's instructions and should use a

mounting accessory recommended by

the manufacturer. An appliance and

cart combination should be moved
with care. Quick stops, excessive

force, and uneven surfaces may
cause the appliance and cart
combination to overturn.

9. Ventilation -- Slots and openings in the cabinet are

provided for ventilation and to ensure reliable
operation of the video unit and to protect it from
overheating. These openings must not be blocked
or covered. Never place the video unit on a bed,
sofa, rug, or other similar surface, or near or over a
radiator or heat register. This video unit should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.

10. Power Sources -- This video unit should be

operated only from the type of power source

indicated on the marking label. If you are not sure
of the type of power supply to your home, consult
your appliance dealer or local power company. For
video units intended to be operated from battery
power, or other sources, refer to the operating
instructions.

11. Grounding or Polarization -- ]his video unit may
be equipped with either a polarized 2-wire AC
(Alternating Current) line plug (a plug having one
blade wider than the other) or 3-wire grounding
type plug, a plug having a third (grounding) pin.

The 2-wire polarized plug will fit into the power

outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug still fails to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
poladzed plug.

The 3-wire grounding type plug will fit into a
grounding type power outlet. This is a safety
feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose

of the grounding type plug.

12. Power-Cord Protection -- Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
of plugs, convenience receptacles, and the point
where they exit from the unit.

13. Outdoor Antenna Grounding- If an outside
antenna or cable system is connected to the video
unit, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Part 1
of the Canadian Electrical Code, in USA Section
810 o! the National Electrical Code, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.

ANTENNA

LEAD IN
WIRE

GROUND
CLAMP

ANTENNA

DISCHARGE UNIT
(NEC SECTION 810-20_

GROUNDtNG CONOUCTO_S
(NEC SECllON B10-2 _)

GROUND CLAIaP5

POWER SE_WCE G_OU_DIt_G

E SYSTEM

NEC -- NA'rtoNAL ELECTRICAL CODE _NECART ZS0.PART _)

14. Lightning -- For added protection of this video u nit
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent

damage to the video unit due to lightning and
power-line surges.

3

15. Power Lines- An outside antenna system should
not be located in the vicinity of overhead power

lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.

16. Ovedoading -- Do not overload wall outlets and

extension cords as this can result in a risk of fire or
electric shock.

17. Objects and Liquids -- Never push objects of any

kind into this video unit through openings as they
may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind onto the video unit.

18. Servicing -- Do not attempt to service this video
unit yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

19, Damage Requiring Service -- Unplug this video

unit from the wall outlet and refer servicing to

qualified service personnel under the following
conditions:

a. When the power-supply cord or plug is

b. If any liquid has been spilled onto, or objects

have fallen into the video unit.

c. If the video unit has been exposed to rain or

water.

d. If the video unit does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions, as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician

to restore the video unit to its normal operation.

e. If the video unit has been dropped or the cabinet

has been damaged.

I. When the video unit exhibits a distinct change in

performance -- this indicates a need for service.

20. Replacement Parts -- When replacament parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire,

electric shock or other hazards.

21. Safety Check-- Upon completion of any service or
repairs to this video unit, ask the service technician
to perform safety checks to determine that the
video unit is in safe operating order.

damaged.

USE & LOCATION

• TO AVOID SHOCK HAZARD ... Your (.;amco=der and power supply should not be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed
for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a
direct splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of
your Camcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug
your Camcorder from the power supply before cleaning.

• DO NOT AiM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS

• DO NOT LEAVE THE PALMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY

CAUSE DAMAGE TO THE INTERNAL PARTS OF THE EVF

• DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct sunlight,

inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your
Camcorder.

• AVOID SUDDEN CHANGES IN TEMPERATURE ,,, If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.

• DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.

• STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to
unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which

could be damaged by improper handling or storage.

CARE

• TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder

body.

• TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.

• TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your
hands and face are free from any chemical products, such as suntan lotion, as it may damage the finish.

4

i _e_ii]jt_z.._!_"iI'_.',,

Things You Should Know ............................................................................................... 2

Important Safeguards ..................................................................................................................... 3, 4

Precautions ......................................................................................................................................... 4

Quick Operation Guide ....................................................................................................................... 6

Supplying Power

Charge the Battery Pack .................................................................................................................. 7

Use the_h_Battery Pack ....................................................................................................................... 7

Battery Refresn'h Feature ................................................................................................................... 8

Battery Care ..................................................................................................................................... 8

AC Aoaptorcf_....................................................................................................................................... 9

Car Battery Cord (Optional) ............................................................................................................. 9

Cassette Information ......................................................................................................................... 10

Setting] the Clock

Set the Time Zone .......................................................................................................................... 11

Set the Daylight Saving Time ......................................................................................................... 12

Set the Date and Time ................................................................................................................... 13

Replace the Battery ........................................................................................................................ 14

Electronic Viewfinder Indications .......................................................................................... 15, 16, 17

Built-in Auto Light .............................................................................................................................. 18

Attaching the Shoulder Strap ............................................................................................................ 19

i "-_--__oJ,I;] _ii [Q]in
Camera Recording

Simple Recording ........................................................................................................................... 20

Stand-by Mode ............................................................................................................................... 21

Stand-by Release ........................................................................................................................... 21

Easy Edit:_iStand-by ......................................................................................................................... 22

Manual Easy Editing ...................................................................................................................... 22

Playback your Recordin,_s

Playback using the EVF ................................................................................................................. 23

Playback using the PlayPak ........................................................................................................... 24

Playback or View on a TV .............................................................................................................. 25

Four-Speed Power Zoom ............................................................................................................... 26

High Speed Shutter ....................................................................................................................... 26

Focus .............................................................................................................................................. 27

Backlight ......................................................................................................................................... 28

One-Touch Auto Fade (BLACK or WHITE only) ............................................................................ 28

Color Digital Fade (other than BLACK and WHITE) ...................................................................... 29

Digital Zoom ................................................................................................................................... 30

Digital Electronic Image Stabilization System ................................................................................ 31

Negative/Positive Transposer ........................................................................................................ 31

Motion Detection (MotionSensor) .................................................................................................. 32

Intelligent Titler ............................................................................................................................... 33

Copying your Tapes (dubbing) .......................................................................................................... 34

[_[.] I'i[.]l IIII r_ [.] i{|i_ "Li[.] t'

Palmcorder Accessory System ......................................................................................................... 35

Notes Regarding Operations ............................................................................................................ 36

Specifications .............................................................................................................................. .;,._;.o_

Before Requesting Service ......................................................................................................... ,_t,

Index of Controls ............................................................................................................. 39, 40, 41, 42

Index ................................................................................................................................................. 42

Spanish Quick Use Guide/Gul'a Para Uso R_.pido ....................................................... 43, Sack Cover

This operating instruction book is designed for use with models PV-D326 and PV-D426.

Illustrations in this manual show the PV-D426. Features may vary, so please read carefully.

Differences between models

Model Number Viewfinder ! Video Heads

PV-D326 Black and White 4-Head

/

PV-D426 Color 4-Head (Metai,CNR)

5

Charge the Battery Pack fully before operation (see page/).

1 Attach the Battery (see page 7).

Make sure Battery is charged before
use (see page 7).

Slide the TAPE EJECT switch to open
the door.

Insert a cassette (see page 10).

Press here to close the door.

F'---'- 5Set the POWER switch to CAMERA.

Built-in Lens Cover opens and POWER
Lamp lights.

Slide the TAPE SPEED Selector for
SP or SLP (see page 10).

With the Eye Cup up to your eye,
adjust the Vision Adjustment Control

to your eyesight.

Press RECORD[PAUSE to start

recording.
Press RECORD/PAUSE again
recording (see page 20).

POWER Lamp

6

I

Set the POWER switch to VCR.

Press REWIND/SEARCH to rewind the
tape.

3 Press PLAY to start playback.

4 Press STOP to stop playback.

ChargetheBatteryPackfully

before operation.

®

POWER
Lamp

CHARGE
Lamp

Note:
Afterrechargingthe Battery Packabout5times,

usethe BATTERY REFRESH feature as
explainedon page8.

Plug in the AC Adaptor.

POWER Lamp lights up.
Insert the Battery

(_) Align the right side of the Battery

with the line on the AC Adaptor.

(_) Press down on the Battery and then

slide it in the direction of the arrow.

CHARGE Lamp lights up. It goes out

when charging is done (about one and

a half hours).

Remove the Battery
Slide the Battery out and then lift up.

• The useful operation time of the Battery will
gradually decrease after repeated use and

recharging. The Battery is no longer
seryiceable if the operation time is very short,

even after a sufficient charge.

With a fully charged Battery Pack, you will have a maximum of about one and a half
hours of continuous use. (If the Built-in Light is used, battery operating time decreases.)

- C . _,_1 Attach the Battery

-jl_]__) (_ Align the Battery with the top of the

I _ IY),/ mounting surface.

@ P_ce_,.sit into place until it locks with a

Remove the Battery

While sliding the BATTERY RELEASE
button, remove the Battery.

7

This feature completely discharges the Battery beto_e recharging begins.

To maintain your battery's operating capacity, use the refresh feature after about every five charges.

CHARGE Lamp

Plug in AC Adaptor.

Place the Battery into
the AC Adaptor.

Press the BATTERY REFRESH
button.

The CHARGE Lamp will flash when

discharging begins and stop flashing
when fully discharged. POWER Lamp

will stay ht when fully charged.

Remove the Battery

• Should you accidentally press the BATTERY
REFRESH button, remove Battery and then
re-insert it to begin charging.

• It takes about seven and a half hours when
both Battery Refresh and charging are

ONLY FOR U.S.A. performed.

!,_._ ATTENTION: i

The product that you have purchased is powered by a rechargeable battery. The battery /
is recyclable. At the end of its useful life, under various state and local laws, it may be /
illegal to dispose of this battery into the municipal waste stream. Check with your local /

solid waste officials for details in your area for recycling options or proper disposal. _)

Caution:

• Charge only with specified charger.

• The Battery can be charged within a tempera-

ture range of 32 ° F (0° C) and 104° F (40 ° C).

• The Battery may be warm after charging or
just after use. This is normal.

• Do not use an insufficiently charged or worn

out Battery.

Safety precautions:

• Do not get the Battery near, or dispose of in

fi re.

• Do not directly connect (short circuit) the
positive (,+) and negative (-) terminals.

• Never attempt to disassemble or reassemble

the Battery.

8

To avoid damage to the Battery:

• Do not drop or jar the Battery.

• Use the Battery with specified units only.

• If the Battery is used in extremely high
temperatures, a safety device will automati-

cally prevent operation.

To insure longer battery life:

• While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a

cool, dark, dry place.

• Keep the Battery terminals clean.

I

DC Power Cable

1

DC IN J[. Connect the VCR DC OUT on

Pv'__ector"'"=_ ' *'-- the AC Adaptor to the DC IN on

the Palmcorder with the DC
Power Cable (supplied).

V Plug in the AC Adaptor.

• The POWER Lampwill lightup.

Note:

• AC Adaptorcan notbe usedto powerthe PalmcorderwhilechargingtheBattery.

• Whilenotin use,unplugthe ACAdaptorfrom theAC outlet.(AC Adaptorconsumes

1.2Wof electricpower if it ispluggedintoan AC outlet even when notin use.)

DC IN
Connector

Cigarette Lighter
Socket (1 :V)

Car Battery Cord Cigarette
(optional) Lighter Plug

Connect a PV-C16 Car Battery Cord
(optional) to the DC IN of the

Palmcorder.

Start your car engine and then_ Insert
the Car Battery Cord plug into your

cigarette lighter socket.

• There is a fuse located in the lighter plug

end of the cord.
Should fuse replacement be necessary
use the exact current rating (in amps).

Note:

* This cord can only be used in vehicles

equipped with DC 12V (negative ground)
batteries. Use only the specified car battery

cord. If you are not sure check with your local
car/truck dealer as to what type of DC battery
ground you have in your vehicle.

o Be sure to start your car engine before

inserting the cigarette lighter plug of the
Car Battery Cord into the lighter socket;

otherwise, the cigarette lighter plug fuse

may burn out.

• Because the car is running while your
Palmcorder is in operation, make sure
you're in a well ventilated area.

• Disconnect the cigarette lighter plug when
your Palmcorder is not being used.

9

Turn the Tape Wheel in the direction
of the arrow until there is no slack.

Attach the Battery (see page 7).

Slide the TAPE EJECT switch
to open the door.

,4

_l'lnsert the cassette vertically

with its window side facing

out.

Press here to closethedoor.

• To remove the cassette, slide the TAPE EJECT switch.

Use tapes with the _ mark in this unit.

Tape Speed Selector Cassette type I
Position T-20 T-30 T-40

I

SP (StandardP{ay) 20 minutes 30 minutes 40 minutes
SLP (Super LongPlay) 1 hour 1 hour 2 hours

30 minutes

SP providesthe best picture.

• SLP has slightlymorepicturenoisedudng playback.

Cassettes have a record tab to ensure that recordings are not accidentally erased.

_ _F _ioerareVent accidental erasure

k off the tab with a screwdriver.

slide tab open.)

_$1 To record again

Cover the hole with adhesive tape.

iding tab (Or, slide tab closed.)

10

Setting the clock is divided into thtuu bections; Set the Time Zone, Set the Daylight
Saving Time, and Set the Date and Time. Please follow instructions in the order

presented. Before you begin...

The Palmcorder is set to the Eastern

Standard time zone at the factory. If you
live in a different time zone, follow the

steps below to change it. Then, when
traveling, rather than resetting the clock to

the local time, you can simply set the
appropriate time zone.

• Connect the Palmcorder to a power source.

• Set the POWER switch to VCR or CAMERA.

- Note:

CLOCK SET menu disappears if, after
activation, CLOCK SET UP A, DOWN _1,or

DISPLAY buttons are not pressed within 30
seconds.

The Palmcorder's clock may lose or gain up
to two minutes per month. Please adjust as
necessary (refer to page 13).

DISPLAY

Time Zone chart

-

'...,_

:.........*w*a! i : : ..- ci

6:DO i 7:00 " 8:00 9:00 _10:0_'11:00_12:00" 1:00 _2:00

Press CLOCK SET UP • to display

the CLOCK SET menu.

Press UP • or DOWN • repeatedly

to selectiR,."]=ll=[qallCJl=l',(e]_.l=ll from

the CLOCK SET menu.

I |

18F..LEC'T: PUSH v/& KEY|
_SET : PUSH DISPLAY KEY)

Press DISPLAY to display the

SELECT TIME ZONE menu.

---SELECT TIME ZONE---

/ CENTRAL HAWAII

MOUNTAIN SAMOA

|SELECT: PUSH VIA KEY

Press UP • or DOWN • repeatedly
to select one of the eight time zones of
the location where you are using the

Palmcorder.

Press DISPLAY to fix the Time Zone.

The CLOCK SET menu appears.

To exit from the CLOCK SET

menu, select _ and press

DISPLAY.

Note: 1

I hen you travel outside the eight time

zones right, please set the clock
manually (see page 13).

11

i,,"tlJ'lri'i[,.i_ilxs,_li_l_,-_Tll_"z_._,.i_#_..il/¥tii[,.,= Before you begin...
The clock will automatically adjust to • Connect the Palmcorder to a power source.

• Set the POWER switch to VCR or CAMERA.

daylight saving time.

- Note:

CLOCK SET menu disappears if, after

activation. CLOCK SET UP k, DOWN • or
DISPLAY buttons are not pressed within 30

seconds.

This feature will not function if Hawaii or

Samoa Time Zone is selected.

DISPLAY

Spring:
FirstSundayin April(DAYLIGHT SAVING
TIME: AUTO) Automaticallyaddsone hour

and adjusts the clock.

1:00 a.m. 2:00 a.m.

IN°rmaITime I : :

DaylightSaving I • -- ._

Time 3:00 a.m. 4:00 a.m.

Autumn:

Last Sunday in October (DAYLIGHT SAVING
TIME: AUTO) Automatically turns back one
hour and adjusts the clock.

DaylightSaving I 1:ooa.m. 2:00a.m.
Time I - --

iNormal Time I " : -_

1:00 a.m. 2:00 a.m,

12

Press CLOCK SET UP • to display
the CLOCK SET menu.

Press UP • or DOWN • repeatedly

to select tl_f'-i'dl[_lil_f-I'll_[eldl_r_14

from the CLOCK SET menu.

-- -CLOCK SEI'- -- _1

!I,SELEC'r TIME ZONE /

I L_" "_'_'_' ' I

I $.DKIE.<TIME SETriN_l |

I /

I _LECT: _ v/. KEY /

Press DISPLAY to display the

DAYLIGHT SAVING TIME menu.

"F"DAYUGHT_ NG TIME" 1

4Press UP • or DOWN • to select

AUTO or OFF.

Press DISPLAY to fix the
DAYLIGHT SAVING TIME setting.

The CLOCK SET menu appears.

To exit from the CLOCK SET
menu, select _ and press

DISPLAY.

Thedateandtimeiscalculated,including
leapyear,uptoDEC312094.

DISPLAY

04SPLAY

E]Op _O0:OO_'M:mI_O 5::o'o:ooPM

_]_'" JAN 1 1995 JAN''I 1995

ITI_ J^"" "11995="b O ,5,:2o:ooPM

qA,N.-1 199S

OI$1,_.A_'

[_" • O'QOPM

O :!.199,

[_1_. 5:20:OOPM ==""_ 5:20:OOPM, .

... FEB 12-19.95

E3So..FEB-12-_995_i_0

_']_, 5:20:O0,RM,--I_ ='_Y

FE B 12 -1.9.9,6_ O

[;17"

Before you begin...

• Connectthe Palmcorderto a powersource.

• Setthe POWERswitchto VCR or CAMERA.
Note:

!

CLOCK SET menu disappears if,after I

activation, CLOCK SET UP A, DOWN • or

I

DISPLAY buttons are not pressed wlthin 30

seconds.

Press CLOCK SET UP • to display
the CLOCK SET menu.

Press UP • or DOWN • repeatedly
to selectl_fl,]r-¥ldi|hV_l;l,:']_l|l_[,dl from

the CLOCK SET menu.

- - - CLOCK SET - - - |

/

II.SELECT TIME ZONE |

P'_"° /

ISELECT: PUSH Vl,k KEY |
_.SET : PUSH DISPLAY KEY)

Press DISPLAY to display the
DATE,qIME SETTING menu.

Press UP • or DOWN • repeatedly
(or hold down) to enter the desired

numbers, then, press DISPLAY to fix
that portion and move to the next.

Adjust the flashing digits for the hour,
minute, month, day and year.

12_.0 0 :00-'AM'/
3A'N 1 1 995|

|

ELECT: PUSH v/& KEY |
ET : PUSH DIS_,.AY. KEY._

When you finish setting the year, the
clock starts operating, and the CLOCK

SET menu appears.
To exit from the CLOCK SET menu,

select _ and press DISPLAY.

13