Panasonic NVVP31 Combi Show View, NVVP26 Combi Show View, NVVP21 User Manual

Contents Page

DVD/CD Player / Video Cassette Recorder

NV-VP31 / NV-VP26 / NV-VP21

Operating Instructions

DVD/CD PLAYER

EJECT

AV ENHANCER

PULL-OPEN

NV-VP31

MUSIC WITH PICTURE

Before connecting the device, operating it or adjusting settings please read these operating instructions completely; especially the safety precautions on pages 2 and 3.

OPEN / CLOSE

2.0 DIGITAL OUT

PAL

Inserting Batteries Safety Precautions

Panel

Front 4

Remote control

Connecting with RF Coaxial cable

Setting Time and Date

Connecting with a 21-pin Scart cable Connecting

with Audio-Videocable

External Devices

onnectors

C13

menu control

VCR 14 Manual Setup

Creating a new station table Changing the name of TV stations

2 3

5-7 8-9

9 10 11 12

15 16

Changing the order of TV stations or

deleting a station

Creating a new station table Shipping condition/factory defaults

17

Menu Others Menu language/ 19

NICAM sound system

Recording

Timer recording

16 17

18

20

21-22

Recording with INTELLIGENT TIMER 23 Recording with ShowView 24 Recording with external recording controls

25

Playback 26

General convenient functions

27-28

DVD-QUICK SETUP 29 Playback functions

30-32 VCR-DVD functions 33 Navigation Menu 34-35 HighMAT / CD-Text 36 DISPLAY menu 37-39 SETUP menus 40-41 Information 42 Before requesting service Remote control codes Specifications

43-45

46 47

Index / Country codes Last page

Dear customer

Thank you for your trust and your decision to purchase this top-quality device. Panasonic is one of the leading manufacturers of entertainment electronics devices. We are sure that you will be completely satisfied with this device.

Matsushita Electric Industrial Co., Ltd.

http://www.panasonic.co.jp/global/

VHS/ DVD

TV

CH

AUDIO

AV

VHS/DVD

OUTPUT

VHS

CANCEL/RESET

INDEX/SKIP

PAUSE/SLOW

PROG PLAY

DIRECT NAVIGATOR

TOP MENU

DISPLAY

PROG/CHECK

OFF TIMER

I-TIMER

PLAY MODE

AV ENHANCER

P. MEMORY

MUSIC WITH

REC CHECK

PICTURE

EXT LINKJET REW

AV LINK

QUICK REPLAY

ZOOM

GROUP

VHS/DVD/TV

EUR7720X10

A

Inserting Batteries

The batteries last for about a year, depending on how often you use the remote control unit.

!

Do not mix old with new batteries, or batteries of different types.

!

Only use batteries without any harmful substances (lead, cadmium, mercury).

!

Do not use rechargeable type batteries.

!

Remove the batteries if the remote control unit will remain unused for longer periods of time.

!

Do not heat or short-circuit the batteries. Immediately remove used-up batteries and replace with batteries of type AA, UM3 or R6.

!

Be sure to put in the batteries the right way round (+ and -).

Dispose of batteries, packaging material and the unit according to statutory regulations. They must not be thrown into the household refuse.

Included

VOLUME

DVD

ccessories

TRACKING/V-LOCK

ShowView

INPUT

P

O

REPEAT

SLOW/ SEARCH

FFFFREW

MENU

PLAY LIST

MENU

EXIT

RETURN

REC MODE

SETUP

REC

DUBBING

Remote control

AC Mains Lead

RJA0043-1C

RF Coaxial cable

EUR7720X10 (NV-VP31 / NV-VP26) EUR7720X30 (NV-VP21)

Batteries

AA, UM3 or R6

Operating Instructions

Guarantee Card

2

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION!

!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS .

!

DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.

!

DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.

!

DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable.

Voltage: Only use power sources complying with the specifications for this device.

AC mains lead protection: Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock.

Service: Never attempt to repair this unit by yourself. If a problem occurs that is not described in these operating instructions, disconnect the power supply and contact your dealer or an authorised after sales service centre.

Safety Precautions

Install this in a horizontal position. Do not place anything heavy on it.

Keep this away from high temperatures and avoid changes in temperatures.

device

SUOMI

VAROITUS:

TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI LAITETTA SAA ALTISTAA SATEELLE, KOSTEUDELLE, VESIPISAROILLE TAI ROISKEELLE, EIKÄ NESTETTÄ SISÄLTÄVIÄ ESINEITÄ, KUTEN ESIMERKIKSI MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE.

NORSK

ADVARSEL:

FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT ELLER SKADER PÅ PRODUKTET, MÅ DETTE APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER IKKE PLASSERES GJENSTANDER FYLT MED VANN, SLIK SOM BLOMSTERVASER, OPPÅ APPARATET.

Keep away from humidity and dust.

Inside of product Produktets innside

(Norsk) Tuotteen sisällä (Suomi)

Back of product, see page13. På baksiden av produktet (Norsk). Laitteen takaosa (Suomi).

LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT

The model and serial number of this product can be found on the back of the unit. Please note them and keep for future reference.

Model No. Serial No.

VAROITUS!

!

ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN SULJETTUUN TILAAN, JOTTA TUULETUS ONNISTUISI. VARMISTA, ETTÄ VERHO TAI MIKÄÄN MUU MATERIAALI EI HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU TAI TULIPALOVAARA.

!

ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA SANOM ALEHDELLÄ , PÖYTÄLIINALLA, VERHOLLA TAI MUULLA VASTAAVALLA ESINEELLÄ.

!

ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE.

!

HÄVITÄ PARISTOT LUONTOA VAHINGOITTAMATTOMALLA TAVALLA.

VAROITUS!

LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.

TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI LEUDOSSA ILMASTOSSA.

Tämä tuotteen toimintaan saattaa tulla häiriöitä lähellä olevasta matkapuhelimesta. Mikäli matkapuhelimesta johtuvia häiriöitä ilmenee, siirrä matkapuhelin mahdollisimman kauas laitteesta jotta häiriöt poistuvat.

Laite tulee asettaa lähelle verkkopistorasiaa ja pistokkeen täytyy olla sellaisessa asennossa, että siihen on helppo tarttua ongelman sattuessa.

ADVARSEL!

!

APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET INNEBYGGET KABINETT ELLER ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE. SØRG FOR AT GARDINER ELLER LIGNENDE IKKE FORVERRER VENTILASJONSFORHOLDENE, SÅ RISIKO FOR ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV OVERHETING UNNGÅS.

!

APPARATETS VENTILASJONSÅPNINGER MÅ IKKE DEKKES TIL MED AVISER, BORDDUKER, GARDINER OG LIGNENDE.

!

PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS, OPPÅ APPARATET.

!

BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR MILJØET.

ADVARSEL!

DETTE PRODUKTET ANVENDER EN LASER. BETJENING AV KONTROLLER, JUSTERINGER ELLER ANDRE INNGREP ENN DE SOM ER BESKREVET I DENNE BRUKSANVISNING, KAN FØRE TIL FARLIG BEST RÅLING. DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI Å REPARERE APPARATET PÅ EGENHÅND. ALT SERVICE OG REPARASJONSARBEID MÅ UTFØRES AV KVALIFISERT PERSONELL.

DETTE APPARATET ER BEREGNET TIL BRUK UNDER MODERATE KLIMAFORHOLD.

Dette apparatet kan under bruk fange opp høyfrekvente forstyrrelser forårsaket av en mobiltelefon som benyttes i nærheten. Hvis slik forstyrrende påvirkning konstateres, bør mobiltelefonen benyttes på større avstand fra dette apparatet.

Utstyret bør plasseres i nærheten av AC-stikkontakten, og støpslet må være lett tilgjengelig hvis det skulle oppstå problemer.

3

Front Panel

VCR= Video Cassette Recorder

Detailed information is available on the specified pages.

Page

Stand-by/on switch /I

TIMER REC

PULL-OPEN

NV-VP31

DVD/CD PLAYER

EJECT

REC

VIDEO

QUICK

CH

JET REW

ERASE

AUDIO

R

L/MONO

AV3 IN

NV-VP31

VCR display

DVD display

MUSIC WITH PICTURE

AV ENHANCER

OPEN / CLOSE

2.0 DIGITAL OUT

PAL

Device control

MUSIC WITH PICTURE

33

EJECT

OPEN / CLOSE

QUICK ERASE

To eject the cassette

Opens and closes the disc tray

To erase a cassette

AV ENHANCER

Automatically optimises and adapts the audio and video settings to the disc used. The menus [Picture Menu] and [Audio Menu] of DVD DISPLAY are not available when this function is enabled.

Description of some function buttons on the front panel is to be found under Remote control.

Display

Active picture signal. The symbol appears on the VCR or DVD display. Use the VHS/DVD OUTPUT button to switch between picture signal. To directly change the VCR or DVD output use the VHS, DVD toggle switches in combination with a function button (e.g. PLAY ).

A video cassette is in.

A disc is in.

Playback

Pause playback (still image)

Slow motion

Forward/Backward search

VCR: Fast winding

4

Remote control

General functions

Stand-by/on switch /I Press to switch the unit from on to stand-by mode or vice versa. In stand-by mode, the unit is still consuming a small amount of power.

Switching this appliance into stand-by mode does not disconnect it from the mains.

Press the button a couple of times to select Sound mode. VCR: stereo (L R), left channel (L -), right channel (- R),

mono (- -) playback.

DVD: Select the appropriate audio channel (L R) or track,

which depends on the disc you use.

Output signal select button to toggle between VCR and DVD (for AV1, VCR/DVD OUT)

Numeric keypad

1

Direct input via numeric key pad (18= )

8

CANCEL/RESET: Undoes entries or selections

VHS/ DVD

AUDIO

VHS/DVD

OUTPUT

CANCEL/RESET

INDEX/SKIP

PROG PLAY

DIRECT NAVIGATOR

TOP MENU

TV

AV

VHS

PAUSE/SLOW

CH

SLOW/ SEARCH

VOLUME

DVD

TRACKING/V-LOCK

ShowView

INPUT

1O

REPEAT

MENU

PLAY LIST

MENU

TV functions

TV set On/Off switch. TV set AV input selection. TV set volume control.

To select the respective TV program memory location.

Remote control's VHS/DVD toggle switches to toggle between VCR and DVD functions.

VHS

DVD

VCR functions are enabled.

VHS

DVD

FFFFREW

DVD functions (blue labels) are enabled.

Channel selector

Press PLAY to start playback.

To eject cassette or disc

Press STOP for more than 3 seconds.

OSD menu selection buttons.

!

DVD: to select JPEG, WMA or MP3 groups ( ) or

().

titles

!

ENTER: Selects or saves a setting.

Press the button repeatedly to display the time,

VCR:

tape counter or remaining tape. To display the DISPLAY menu.

DVD:

DISPLAY

EXIT

RETURN

Quits a menu.

PROG/CHECK

I-TIMER

AV ENHANCER

P. MEMORY

MUSIC WITH

PICTURE

EXT LINKJET REW

ZOOM

GROUP

37

VHS/DVD/TV

OFF TIMER

PLAY MODE

REC CHECK

QUICK REPLAY

EUR7720X10

AV LINK

REC MODE

SETUP

REC

DUBBING

To copy a DVD RAM to VHS cassette.

33

5

Remote control

VCR functions

Tape counter

The tape counter will be automatically reset to [0:00:00] when you insert a video cassette.

!

Or you can press the CANCEL/RESET button on the remote control unit to manually reset the tape counter to [0:00:00].

Finding the start of a recording.

Pause a recording session. Still or slow motion playback.

Press STOP to stop recording, playing back or winding.

Plays back programmed recordings.

22

Defines programmes transmitted to the same program memory location at the same time.

To display the Timer recording menu.

Activates the recording timer.

MUSIC WITH PICTURE

For fast rewinding to the beginning of the tape. To record using the external recording level control.

A: To delete tagged station.

VHS/ DVD

TV

VOLUME

AUDIO

VHS/DVD

OUTPUT

CH

AV

VHS

DVD

TRACKING/V-LOCK

Tracking control of disturbed images during playback

ShowView menu

26

24

AV input select button

PAUSE/SLOW

EUR7720X10

OFF TIMER

PLAY MODE

REC CHECK

AV LINK

QUICK REPLAY

ShowView

1O

SLOW/ SEARCH

INPUT

REPEAT

MENU

PLAY LIST

MENU

EXIT

RETURN

REC MODE

SETUP

REC

DUBBING

FFFFREW

27

CANCEL/RESET

INDEX/SKIP

PROG PLAY

DIRECT NAVIGATOR

TOP MENU

23

DISPLAY

21

33

27

25

PROG/CHECK

AV ENHANCER

GROUP

I-TIMER

P. MEMORY

MUSIC WITH

PICTURE

EXT LINKJET REW

ZOOM

VHS/DVD/TV

Toggles between input A1, A2, A3 (front) or

dc (DVD internal).

Goes from Stop into Fast Forward or Fast Rewind mode. Forward and backward search during playback.

Displays the VCR menu.

Switches the unit into stand-by mode after the set time.

Sets the tape speed.

27

14

26

20

Video recording

You will be displayed either the Timer recording menu or an information on the current recording.

Toggles between TV reception and video playback channel. B: Move tagged station.

6

Remote control

DVD functions

Skip chapters, titles or frames

!

Press SKIP during playback or in pause mode.

Stop playback

!

Press STOP twice.

Resume

!

Press STOP during playback to store the current position on the disc.

!

Press PLAY while [ ] is flashing on the display. Playback will be resumed at the point where you stopped it.

Cancel the Resume function

!

Press STOP until [ ] is disappears from the display.

D

Opening the disc tray or the unit going into stand-by mode also clears the stored position on the disc.

Displays the DVD-RAM menu. Displays the main menu.

Resumes playback at stored position following an interruption.

AV ENHANCER Zoom

!

Press ZOOM during playback. Press to set the zoom factor, to select a Zoom mode: ENTER plus .

Restore factory setting

!

Press ZOOM until x1.00 is shown. The zoom functionality may be restricted depending on the disc format.

Group Search

For some disc formats not all of the described DVD functions are available.

VHS/ DVD

TV

VOLUME

AV

PAUSE/SLOW

I-TIMER

P. MEMORY

MUSIC WITH

PICTURE

EXT LINKJET REW

ZOOM

VHS

CH

OFF TIMER

PLAY MODE

REC CHECK

AV LINK

QUICK REPLAY

DVD

TRACKING/V-LOCK

ShowView

INPUT

1O

REPEAT

SLOW/ SEARCH

MENU

PLAY LIST

MENU

EXIT

RETURN

REC MODE

SETUP

REC

DUBBING

FFFFREW

AUDIO

VHS/DVD

OUTPUT

CANCEL/RESET

INDEX/SKIP

PROG PLAY

DIRECT NAVIGATOR

TOP MENU

31

39

DISPLAY

PROG/CHECK

AV ENHANCER

GROUP

Repeat

!

Press REPEAT during playback. There is no mode for repeatedly playing back entire discs.

Slow motion (backwards/forwards)

!

Press SLOW in Pause mode. Keeping the button pressed increases the speed of search at 5 steps.

!

Press PLAY to resume normal playback.

D

VCDs do not support reverse slow motion playback.

Search

!

Press SEARCH during playback. Keeping the button pressed increases the speed of search at 5 steps.

Pause playback (still image)

!

Press PAUSE during playback. Playback stops at the current picture frame.

!

Press PLAY to resume playback.

Displays a Playlist Displays the menu.

Random Playback/Program Play

Displays the SETUP menu.

Scene replay

!

Press QUICK REPLAY during playback. Every push of the button replays a couple of seconds of

31 32

40

the current track or programme.

VHS/DVD/TV

EUR7720X10

38

However, you cannot go back to before the beginning of a title.

D

QUICK REPLAY is not supported by all discs.

7

Connecting with RF Coaxial cable

Follow the steps

You can connect the VCR/DVD to your TV set by using a RF coaxial cable.

AC IN~

VCR / DVD

1

A V

)

V

OT

D

V

D

TV

IG D

D

M C P

(

U

D

/

R

CV

VDO

D

U

A I O

L

R

O I

U

A

L

A T I

M)

E

R

T

S A T I

B /

L

R

O I

D

U

A L A

C

I

T P O

AC mains lead

3

T

U

O

E ID V

O

E D I V

T

(

2

V

A

DE

CO

E

D

(

)X

T

E

2

Antenna input

/

R

Aerial

1

RF IN Antenna input

N

FI

R

T

U

O

F

R

RF OUT

Antenna output

RF coaxial cable

described below.

Disconnect power to all devices.

Connect antenna to the

1

RF IN (Antenna input) connector of the VCR/DVD.

Connect the VCR/DVD´s

2

RF OUT (Antenna output) to the television set’s antenna in connector.

3

Connect VCR/DVD and television set to the AC mains supply.

VCR Auto Setup with RF Coaxial cable

(Automatic tuning)

Country

Belgien Belgique België Danmark España EллЬдб France

The Country menu appears.

!

Italia Nederland Norge Österreich Deutschland Portugal Suomi

With the arrow buttons select the according country, and

Sverige Schweiz Suisse Svizzera others

confirm with ENTER. Automatic tuning for all receivable TV stations begins. Approximate duration is 5 minutes.

If menu Clock set appears

If time and date are not transmitted by a TV station, they must be set manually.

!

Enter Time and Date with or ... , then save with ENTER.

D

Mind that a wrong date or time will influence the programmed recording of TV programmes (don't forget to change summer time and winter time).

Optionally, you can have a QUICK SETUP following VCR Auto Setup for the DVD player.

D

If the Country menu does not appear after turning the device on, you may reset the device to its factory defaults (page 17). Upon doing so the VCR Auto Setup will start again.

1 2 3

0

29

3

AC mains lead

8

Channel tuning / Correcting interferences

Setting Time and Date

If you decide to just use the RF coaxial cable to connect the TV set you must adjust the video output channel with the TV set’s input channel.

Screen Display

VCR Ch:36

!

Turn on your television set.

!

Turn on the VCR by pressing the Stand-by/on switch.

!

Press MENU for about 5 seconds. The preset channel is displayed on the VCR-display.

Test pattern

VCR Display

!

Adjust television set to show the test picture. If there are any interferences select another channel on the

television set and the VCR.

!

Press the CH button to change the channel

TRACKING/V-LOCK

(e.g. Channel 39). Fine-tune television set until

RF Output Channel

a clear picture is displayed.

!

Confirm with ENTER. Continue VCR Auto Setup (Automatic tuning).

RF Output Channel

D

The VCR will not initiate the VCR Auto Setup if it was run once

VCR Ch:39

before. Reset the device to factory defaults (page 17). Upon doing so you will be able to start VCR Auto Setup again.

Test pattern

D

Press EXIT to abort VCR Auto Setup. You can run VCR Auto Setup again at another time.

If a 21-pin Scart cable is used, please adjust the following settings to disable the VCR´s RF-output channel.

21

(RF OFF)

...

!

69

Press MENU for about 5 seconds. The preset channel will be displayed on the VCR-display.

!

Press channel select buttons CH or 0 to invoke [- -].

!

Confirm with ENTER.

Menu

Timer recording Tuning Clock set Others Language : English

: exit

ENTER

: select : access

EXIT

Automatic tuning (not for VP21)

Clock set

AUTO

Time : 12 : 00 : 00 Date : 11. 6. 04

: select : access

MENU EXIT

: return : exit

ENTER

Manual tuning

Clock set

MANUAL

Time : 12 : 00 : 00 Date : 11. 6. 04

: select : access

MENU EXIT

: return : exit

ENTER

!

Press MENU, the Menu screen appears.

!

With select Clock set.

!

Press ENTER.

!

Select [AUTO] and confirm with ENTER.

If the device does not find a TV station broadcasting the time signal, set Time and Date manually.

!

Select [MANUAL] and confirm with ENTER.

!

With or ...

1 2 3

0

enter Time and Date, then store with ENTER.

9

Connecting with a 21-pin Scart cable

Follow the steps described below.

Disconnect power to all devices.

1

Connect antenna to the RF IN (Antenna input) connector of the VCR/DVD.

Connect the VCR/DVD’s

2

RF OUT (Antenna output) to the television set’s antenna input connector.

Connect the VCR/DVD’s

3

AV1 socket (21-pin Scart socket) to the TV set’s Scart In socket.

4

Connect VCR/DVD and TV set to the AC mains supply.

AC IN~

AC IN

VCR / DVD

D O

TV

4

AC mains lead

O I

A

L

A U T I

G D I

D

M

E )

R

T

S A T I

B /

M C P

(

T

U

D

V

L

A

C

I

T P O

4

AV1 21-pin Scart socket

T

U

D

V

R

C

V/D O

O

E

D I V

D

U

A I O

L

R

L

R

O

E

D I V

O I

D

U

A

AC mains lead

Antenna input

3

RF IN Antenna input

1

A V

V

T )

(

2

V

A

/

R

DE

CO

E

D

(

)

T

X

E

RF OUT Antenna output

RF coaxial cable

2

21-pin Scart cable

Aerial

1

N I

F

R

U O T

F

R

VCR Auto Setup with 21-pin Scart cable

(Automatic tuning)

D

Country

Belgien Belgique België Danmark España EллЬдб France

!

Italia Nederland Norge Österreich Deutschland Portugal Suomi

Turn on your television set. With the Stand-by/on switch turn on the VCR/DVD. The Country menu appears. With the arrow buttons select the according country, and

Sverige Schweiz Suisse Svizzera others

confirm by pressing ENTER. Automatic tuning for all receivable TV stations begins. Approximate duration is 5 minutes.

If menu Clock set appears

If time and date are not transmitted by a TV station, they must be set manually.

!

Enter Time and Date with or ... , then save with ENTER.

D

Mind that a wrong date or time will influence the programmed recording of TV programmes (don't forget to change summer time and winter time).

Optionally, you can have a QUICK SETUP following VCR Auto Setup for the DVD player.

If the Country menu does not appear after turning the device on, you may reset the device to its factory defaults (page 17). Upon doing so the VCR Auto Setup will start again.

1 2 3

0

29

10

Connecting with Audio-Videocable

Follow the steps described below.

AUDIO (R/L) / VIDEO

AC IN

D

C

P

(

T

O

U

D

V

D

Audio / Videooutput

V

D D

/

R O

C

V

O

I

D

U

A

L

R

O

DI

U

A

L

A

T

I

G

I

)

M

A

R

T

S E

T

I

B

/

M

L

R

O

I

U

A D

L

A

C

I

T

P

O

4

T

U

O

ED

I

V

ED OV

I

AC mains lead

TV

4

AC mains lead

1

AV

)

V

T

(

2

V

A

/

R

E

D

CO

DE

(

T

X )

E

RF OUT Antenna output

Antenna input

2

RF coaxial cable

3

Audio (L/R) / Videocable

AC IN~

VCR/DVD

Disconnect power to all devices.

Connect antenna to the

1

RF IN (Antenna input) connector of the VCR/DVD.

Connect the VCR/DVD’s

2

RF OUT (Antenna output) to the TV set’s antenna input connector.

Connect the VCR/DVD OUT

3

(AUDIO R/L, VIDEO) sockets of the VCR/DVD to the TV input.

VCR/DVD

Connect and

4

television set to the AC mains supply.

Aerial

1

RF IN Antenna input

N

I

F

R

T

U

O

F

R

VCR Auto Setup with Audio-Videocable

()Automatic tuning

D

Country

Belgien Belgique België Danmark España EллЬдб France

!

Italia Nederland Norge Österreich Deutschland Portugal Suomi

Turn on your television set. With the Stand-by/on switch turn on the VCR/DVD. The Country menu appears. With the arrow buttons select the according country, and

Sverige Schweiz Suisse Svizzera others

confirm by pressing ENTER. Automatic tuning for all receivable TV stations begins. Approximate duration is 5 minutes.

If menu Clock set appears

If time and date are not transmitted by a TV station, they must be set manually.

!

Enter Time and Date with or ... , then save with ENTER.

D

Mind that a wrong date or time will influence the programmed recording of TV programmes (don't forget to change summer time and winter time).

Optionally, you can have a QUICK SETUP following VCR Auto Setup for the DVD player.

If the Country menu does not appear after turning the device on, you may reset the device to its factory defaults (page 17). Upon doing so the VCR Auto Setup will start again.

1 2 3

0

29

11

External Devices

Others 1 / 2

Tape length : AUTO ( E-240)

AV2 : EXT TV system : AUTO SQPB : AUTO OSD : 4 : 3 VCR/DVD OUTPUT : AUTO RFC system : DK

Connecting a Set Top Box, satellite receiver, decoder or a second recorder.

You can connect a Set Top Box to receive digital broadcast by antenna (DVB-T) signals, a satellite receiver (digital/analogue) or a decoder to decrypt encrypted programmes.

Disconnect power to all devices. Connect the external device to the AV2 input of the VCR/DVD by using a 21-pin Scart cable. Connect VCR/DVD, television set and the external unit to the

VCR/DVD

T

U

O D V

D

I

U ADO L

A

T GI I

D

)

M

A

R

T S T E

I B

/ M C

P (

A

CL I T

P

O

R

O I

U

AD

V2 A

O/ CR EE

DD (

) T

X E

L

E DO I

V

V1 A

) V

T (

T

V DDU /

R

C O

V

O E D I

V O I

D

U

A

L

AC mains supply and switch them on.

!

Press MENU.

!

With select the Others menu and confirm with ENTER.

External unit

Aerial

TV

Others 1 / 2

Tape length : AUTO ( E-240)

AV2 : DECODER TV system : AUTO SQPB : AUTO OSD : 4 : 3 VCR/DVD OUTPUT : AUTO RFC system : DK

Tuning

Pos Name Ch Pos Name Ch

1 ARD 7 2 ZDF 4 3 N3 2 4 RTL 12 5 SAT1 13

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB

: delete : move

: : access

select

MENUMENUMENUMENUMENUMENUMENUMENU

: return : exit

6 VOX 8 7 PRO7 95 8 RTL2 85 9 PREM 97 10 SRTL 98

ENTERENTERENTERENTERENTERENTERENTERENTER EXITEXITEXITEXITEXITEXITEXITEXIT

12

Set Top Box, satellite receiver, second recorder:

!

Select AV2 with , and set to [EXT] with .

Decoder:

!

Select AV2 with , and set to [DECODER] with . Press MENU to return to the Menu screen. When using a decoder switch channel to decoder.

Setting the channel to decoder

!

Press MENU.

!

With select menu Tuning. and confirm with ENTER.

!

With ENTER select Manual.

!

With , select the encrypted channel and confirm with ENTER.

!

With select Decoder, then select [ON] with .

!

Press MENU to return to the Tuning menu.

Pos Name Channel Fine tuning Decoder Video system Mono Audio mode

: select

MENUMENUMENUMENUMENUMENUMENUMENU

: return : exit

:

9 : PREM : 97

AUTO

: :

ON

:PAL : OFF :DK

EXITEXITEXITEXITEXITEXITEXITEXIT

21-pin Scart cable

- - -

Connectors

Before connecting

!

Verify that all devices to be connected up are unplugged from the AC mains.

DVD OUT

DIGITAL AUDIO

(PCM/BITSTREAM)

OPTICAL

VCR/DVD OUT

AUDIO

R L

AUDIO

VIDEO

AV 1 (TV)

AV 2 (DECODER/ EXT)

RF IN

RF OUT

Digital connectors (OPTICAL)

To play programmes with a 5.1-channel surround sound, connect the digital audio output ( OPTICAL ) with an external Multichannel Dolby Digital Decoder, for example.

Prerequisites for making recordings with an external digital recorder

- The original disc must not be copy-protected.

- The recorder must be able to process signals with a scanning

frequency of 48 kHz/16 bit.

- You cannot make MP3/WMA recordings.

D

Adapt the Audio SETUP menu settings to the following: PCM Digital Output: [Up to 48 kHz] Dolby Digital / DTS Digital Surround / MPEG: [PCM]

D

Deactivate function Advanced Surround.

Push the jack all the way into the socket with this side facing up.

TIMER REC

NV-VP31

Video

REC

VIDEO

CH

JET REW

AUDIO

L/MONO

Audio

QUICK ERASE

R

AV3 IN

RL

41

39

INPUT

REPEAT

DVD connectors

Optical digital audio cable

OPTICAL

Amplifier (example)

Red

AUDIO IN

R L

VIDEO IN

Amplifier or TV set (example)

Connection to a TV set without a scart socket or to an amplifier component (home cinema):

YellowWhite

To be able to hear sound in stereo or Dolby Pro Logic quality, attach an amplifier or an analogue audio component supporting these features.

To avoid sound quality problems deactivate function Advanced Surround when you attach an amplifier with Dolby Pro Logic functionality.

Connection to AV3 (front panel)

!

Connect your external unit (e.g. a video camcorder) with the front panel input. Just seize the L/Mono port for mono recording of the audio signal.

!

Use INPUT to select A3.

LP

39

13

VCR menu control

Menu

Timer recording Tuning Clock set Others Language : English

21

9

18

Timer recording 1/3

Pos Date Start Stop

-- ---- -- / -- --:-- --:-- - ---

22

-- ---- -- / -- --:-- --:-- - ---

Tuning

Manual Auto Setup Shipping condition

15

Clock set

AUTO

11

Time : 12 : 00 : 00 Date : 11. 6. 04

Others 1 / 2

Tape length :AUTO ( E-240)

AV2 :DECODER TV system :AUTO SQPB :AUTO OSD :4 : 3 VCR/DVD OUTPUT:AUTO Remote :VCR 1

VPS PDC

The cursor buttons on the remote control

ENTER

unit allow you to navigate through menus and change selected entries.

!

Press MENU, the menu screen appears.

!

With select the desired sub-menu.

!

Press ENTER, the selected menu appears.

!

With select the entry you would like to change, then confirm with ENTER.

!

Make your changes following the menu steps.

!

With MENU return to the previous menu.

!

Press EXIT to leave the menu.

D

Not every model supports all of the functions.

14

Manual Setup

Tuning

Pos Name Ch Pos Name Ch

ENTERENTERENTERENTERENTERENTERENTERENTER EXITEXITEXITEXITEXITEXITEXITEXIT

- - -

AUTO

EXITEXITEXITEXITEXITEXITEXITEXIT

6 VOX 8 7 - - - - - - 8 - - - - - - 9 - - - - - - 10 - - - - - - -

1 ARD 7 2 ZDF 4 3 N3 2 4 RTL 12 5 SAT1 13

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB

: delete : move

: : access

select

MENUMENUMENUMENUMENUMENUMENUMENU

: return : exit

Pos Name Channel Fine tuning Decoder Video system Mono Audio mode

: select

MENUMENUMENUMENUMENUMENUMENUMENU

: return : exit

: 7 : - - - : : : : OFF : AUTO : OFF :DK

Creating a new station table

!

Press MENU, the Menu screen appears.

!

Select the Tuning menu by pressing and confirming with ENTER.

!

Confirm Manual by pressing ENTER.

!

With the buttons, select an open storage position.

!

Press ENTER.

!

Enter channel with the or ... buttons.

1 2 3

0

Channel tuning starts. Wait until the desired station has been set. Fine tuning may help to minimise any interference.

!

Press MENU to return to the Tuning screen.

Options available for tuning the channels

Pos

Name Channel

Fine tuning

Decoder Video system Mono

AUTO / MAN. ON / OFF AUTO / PAL / MESECAM ON / OFF

Station position. Station name setting. Channel setting.

Fine tuning of disturbed picture. For reception of encrypted channels. TV system setup. Switch stereo to mono.

Audio mode

BG / I / DK

Audio system set-up

15