Panasonic n330, n325 datasheet

N330/N325

n-type crystalline silicon Double-sided textured surface

i-type amorphous layer

Amorphous layer

Transparent electrode (TCO)

Lattice-type electrodes

Finger

Tab

These amorphous silicon layers reduces the recombination of electrons to minimum level.

Electrodes

Ultra-thin amorphous silicon layer

Panasonic’s unique heterojunction technology uses ultra-thin amorphous silicon layers. These thin dual layers reduce losses, resulting in higher energy output than conventional panels.

Advanced bifacial cell designed for increased energy output. The cell utilizes sunlight reflected back from the rear side material which captures more light and converted into energy.

Our competitive advantages

High Efficiency at High Temperatures

As temperature increases, HIT® continues to perform at high levels due to the industry leading temperature coefficient of -0.258% /⁰C. No other module even comes close to our temperature characteristics. That means more energy

throughout the day.

Quality and Reliability

Panasonic’s vertical integration, 20 years of experience manufacturing HIT® and 20 internal tests beyond those mandated by current standards provides extreme quality assurance.

Low Degradation

HIT “N-type” cells result in extremely Low Light Induced Degradation (LID) and zero Potential Induced Degradation (PID) which supports reliability and longevity. This technology reduces annual degradation to 0.26% compare to 0.70% in conventional panels, guaranteeing more power

for the long haul.

25 Year Product and Performance Warranty**

Industry leading 25 year product workmanship and performance warranty is backed by a century old company- Panasonic. Power output is guaranteed to 90.76% after 25 years, far greater than other companies.

Higher Efficiency 19.7%

Enables higher power output and greater energy yields. HIT® provides maximum production for your limited roof space.

Enhanced Frame Design

A new 40mm frame increases durability and strength, being able to handle loads of up to 5400Pa. Also, the water drainage system gives rain water and snow melt a place to go, reducing water stains and soiling. Less dirt on the module means more

sunlight getting through to generate power.

HIT® is a registered trademark of Panasonic Group

97%

N330/N325

ELECTRICAL SPECIFICATIONS

Model VBHN330SA17 VBHN325SA17

Rated Power (Pmax)¹ 330W 325W

Maximum Power Voltage (Vpm) 58.0V 57.6V

Maximum Power Current (lpm) 5.70A 5.65A

Open Circuit Voltage (Voc) 69.7V 69.6V

Short Circuit Current (lsc) 6.07A 6.03A

Temperature Coefficient (Pmax) -0.258%/°C -0.258%/°C

Temperature Coefficient (Voc) -0.16V/°C -0.16V/°C

Temperature Coefficient (lsc) 3.34mA/°C 3.32mA/°C

NOCT 44.0°C 44.0°C

CEC PTC Rating 311.7W 306.8W

Cell Efficiency 22.09% 21.76%

Module Efficiency 19.7% 19.4%

Watts per Ft.² 18.3W 18.0W

Maximum System Voltage 600V 600V

Series Fuse Rating 15A 15A

Warranted Tolerance (-/+) +10%/-0%* +10%/-0%*

MECHANICAL SPECIFICATIONS

Model VBHN330SA17, VBHN325SA17

Internal Bypass Diodes 4 Bypass Diodes

Module Area 18.02 Ft.² (1.67m²)

Weight 41.89 Lbs (19kg)

Dimensions LxWxH 62.6x41.5x1.6 in. (1590x1053x40 mm)

Cable Length +Male/-Female 40.2/40.2 in. (1020/1020 mm)

Cable Size / Type No. 12 AWG / PV Cable

Connector Type

Static Wind / Snow Load 112 PSF (5400Pa)****

Pallet Dimensions LxWxH

Quantity per Pallet / Pallet Weight 24 pcs./1049 Lbs. (476 kg)

Quantity per 40' Container 672 pcs.

Quantity per 20' Container 288 pcs.

Multi-Contact® Type IV (MC4™)

63.7x42.2x46.4 in.(Malaysia)

65.3 x 43.7 x 48.5 in.(USA)

PERFORMANCE WARRANTY

DIMENSIONS

Unit: inches (mm)

*Please refer to the Installation Manual for different loads

DEPENDENCE ON IRRADIANCE

13.514.9

90.76%

More power

over 25 years

80%

OPERATING CONDITIONS & SAFETY RATINGS

Model VBHN330SA17, VBHN325SA17

Operating Temperature -40°F to 185°F (-40°C to 85°C)

Hail Safety Impact Velocity 1" hailstone (25mm) at 52 mph (23m/s)

Safety & Rating Certifications UL 1703, cUL, CEC

UL 1703 Fire Classification Type 2

Limited Warranty

Manufacturing Locations Malaysia and USA

NOTE: Standard Test Conditions: Air mass 1.5; irradiance = 1000W/m²; cell temp. 25°C * Maximum power at delivery. For guarantee conditions, please check our guarantee document. ** Installation need to be registered through our website www.panasonicusahitwarranty.com within 60 days

in order to receive twenty-five (25) year Product workmanship. Otherwise, Product Workmanship will be only fifteen (15) years.

*** 1st year 97%, after 2nd year 0.26% annual degradation to year 25.

STC: Cell temp. 25°C, AM1.5, 1000W/m²

Safety locking clip (PV-SSH4) is not supplied with the module.

NOTE: Specifications and information above may change without notice.

Panasonic Eco Solutions of North America

Two Riverfront Plaza, 5th Floor, Newark, NJ 07102 panasonicHIT@us.panasonic.com

na.panasonic.com/us/solarpanels

25** Yrs Workmanship and Power Output (Linear)***

Reference data for model: VBHN330SA17 (Cell temperature: 25°C)

CAUTION! Please read the installation manual carefully before

using the products.

Used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.

Specifications are subject to change without notice

RS18783DS_12.23.19