Panasonic MLS-3751L User Manual
MLS-3751L
MLS-3781L
Top-Loading
Portable
Autoclaves
Features:
• Compact, portable design allows for models to
conveniently be moved from one lab to another.
• Delivers high pressure steam with speed,
efciency and reliability
Panasonic… the new name for SANYO
www.panasonic.com/biomedical
Top-Loading Portable Autoclaves
Panasonic MLS series top-loading autoclaves are a popular method of sterilization for today’s research laboratories. Self-contained and easy
to use, these reliable energy-saving autoclaves are ideal for a wide range of applications, including liquid culture media preparation, labware
and waste sterilization. Designed to meet good laboratory practice criteria in biotechnology, pharmaceutical and clinical laboratories. Panasonic
MLS series portable autoclaves deliver high pressure steam with speed, efficiency and reliability, for research lab usage only. The MLS
autoclave series is designed for individual lab use and can be conveniently moved from one lab to another.
Top-Loading Portable Autoclaves
Model Number
ML S -37 51L- PA
ML S -37 81L-PA
Easy mobility for sterilization on demand.
Effective Capacity
(cu.ft.)
1.8
50 L
2.6
75 L
Exterior Dimensions
478 x 632 x 748 mm
18.8" x 24.9" x 38.0 "
478 x 632 x 965 mm
Microprocessor Controls
Assures correct temperature and is accurately maintained and easily operated
with one-touch operation. Sterilizing temperature is controlled by the microprocessor within +2°C of the set temperature in
the range of 115°C to 135°C.
Process Voice Notification
The MLS series includes a voice notification of the system process. Each step of
the process is notified via a pre-recorded
voice message, allowing the end user to
hear the process as it is happening.
Compact Design, Large Chamber
Maximizes use of available lab floor
space, stores easily when not in use.
14.6 inch diameter wide chamber offers
large capacity, storing example load of 8
(MLS-3751L) or 12 (MLS-3781L) 1,000 ml
flasks.
MLS-3751L
(w x f-b x h)
18.8" x 24.9" x 29.4"
Maximum
Temp.
135°C 2 8
135°C 3 12
Baskets
(included)
Low-Profile and Ergonomic Design
Simplifies access, easy to load and unload.
Swing-Up Lid
Opens chamber for 100% access; eliminates side space requirement.
Printer
Optional built-in process printer for batch
documentation available. The printer
prints out the process run results of
temperature, pressure, vs. time. Each
printout is date and time stamped.
MLS-3781L
Flask Capacity
(1L)
Cross
Section
14.6" (37cm)
371 mm
14.6" (37cm)
371 mm
Voltage, Power
Connection
NEMA L5-30
208/ 230V
NEMA L6-30
Programmable
Allows maximum flexibility in ramp up,
dwell, ramp down and cool-off protocols.
Pre-Set Programs
These units offer a total of 12 pre-set
programs to choose from on a simpleto-operate control panel with lighten
temperature/time indicators. They also
allow for independent programming for
users to set there own programs
• Sterilizing: For water, culture media,
regents and other fluids. After completion and cooling to a selected temperature. Air is expelled automatically
through exhaust valves.
• Sterilizing/Keep Warm: After sterilizing
culture media, reagents and other
liquids. High temperature prevents
solidifying.
• Melting/Keep Warm: To melt or keep
culture media at a xed temperature.
• Instrument Sterilizing: For flasks,
beakers, test tubes, and other lab
instruments.
115 V
Optional built-in printer
MLS-37PR
Panasonic Healthcare Company of North America
1300 Michael Drive, Suite A, Wood Dale, IL 60191
Toll Free USA (800) 858-8442, Fax (630) 238-0074
www.panasonic.com/biomedical
© Panasonic Printed in USA 2012.02 JK
JK201202V1
Loading...