Panasonic MC-V5117 User Manual

Operating

Instructions

S-ON^'

tool:

VACUUM CLEANER

MC-V5117

f’anasonic

CONSUMER INFORMATION

Please read IMPORTANT SAFETY INSTRUCTIONS on page 4 before use. Read and understand all instructions.

TO OUR VALUED CUSTOMER

We are very pleased to welcome you to the Panasonic family of products. Thank you for
purchasing this product. Our intent is that you become one of our many satisfied customers.

Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your
cleaner is intended only for household use. The cleaner should be stored in a dry, indoor
area. Read the Operating Instructions carefully for important use and safety information.

PLEASE PAY CLOSE ATTENTiON TO THE

WARNiNG AND CAUTiON LABELS THAT

ARE FOUND THROUGHOUT THiS MANUAL.

WARNING labels are designed to alert you to the
possibility of personal injury, loss of human life,

A

WARNING

and/or damage to the vacuum cleaner and/or
personal property if the instructions given are
not followed.

CAUTION labels are designed to alert you to the

A

A

TO AVOID ELECTRICAL SHOCK

Never vacuum damp or wet surfaces or liquids.
Do not store machine outdoors.
Replace worn or frayed power cord immediately.

TO AVOID ACCIDENTS

Except for hand-held cleaners, keep machine on floor - not chairs, tables, steps, stairs, etc.

Store machine promptly after each use to prevent accidents such as tripping over power cord or machine.

Use machine and accessories only in a manner intended by the manufacturer.

The use of an extension cord is not recommended.

01996 Matsushita Electric Industrial Co., Ltd. All rights reserved.

CAUTION

WARNING

possibility of damage to the vacuum cleaner
and/or personal property if the instructions given
are not followed.

-2-

TABLE OF CONTENTS

CONSUMER INFORMATION.........................................................................................2

IMPORTANT SAFETY INSTRUCTIONS.........................................................................4

PARTS IDENTIFICATION................................................................................................. 5

Feature Chart..............................................................................................................5

TO ASSEMBLE CLEANER.................................................................................................6

Attaching Handle to Vacuum Cleaner...................................................................6

Using the Cord Hook................................................................................................6

Attachment (TooIs-on-Board) Assembly..............................................................7

SPECIAL FEATURES OF CLEANER................................................................................. 8

Automatic Self Adjusting Rug Nozzle

Edge Cleaning Feature..............................................................................................8

Vac Gauge...................................................................................................................8

TO OPERATE CLEANER...................................................................................................9

Power Cord................................................................................................................. 9

On/Off Switch.............................................................................................................9

Handle Adjustments..................................................................................................9

Use of Attachments................................................................................................10

ROUTINE CARE OF CLEANER.....................................................................................11

Replacing Secondary Electrostatic Filter

Changing the Dust Bag.......................................................................................... 12

Removing/lnstalling the Lower Plate...................................................................13

Replacing the Headlight Bulb...............................................................................13

Replacing the Drive Belt.........................................................................................14

Cleaning the Agitator Assembly...........................................................................14

Replacing the Agitator Brushes............................................................................15

Cleaning Exterior and Attachments.....................................................................16

Removing Clogs......................................................................................................16

BEFORE REQUESTING SERVICE..................................................................................17

NOTES .............................................................................................................................18

WARRANTY .....................................................................................................................19

WHAT TO DO WHEN SERVICE IS NEEDED.............................................Back Cover

...................................................................

............................................................

11

8

- 3-

IMPORTANT SAFETY INSTRUCTIONS

When using vacuum cleaner, basic precautions should always

be followed, including the following.

READ ALL INSTRUCTIONS BEFORE

USING TRIS VACUUM CLEANER

WARNING

To reduce the risk of fire, electrical shock, injury:

1.

Do not leave vacuum cleaner when plugged in. Unplug from outlet when
not in use and before servicing.

2.

To reduce the risk of fire, electric shock - Do not use outdoors or on wet
surfaces.

3.

Do not allow to be used as a toy. Close attention is necessary when
used by or near children.

4.

Use only as described in this manual. Use only manufacturer's
recommended attachments.
Do not use with damaged cord or plug. If vacuum cleaner is not working

5.
as it should, has been dropped, damaged, left outdoors, or dropped into
water, return it to an Authorized Panasonic Service Center.

6.

Do not pull or carry by cord, use cord as a handle, close door on cord, or
pull cord around sharp edges or corners. Do not run vacuum cleaner over

cord. Keep cord away from heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

8. Do not handle plug or vacuum cleaner with wet hands.

9. Do not put any objects into openings. Do not use with any opening
blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

10. Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.

11. Do not pick up anything tfiat is burning or smoking, such as

cigarettes, matches, or hot ashes.

12. Do not use without dust bag and/or filters in place.

13. Turn off all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use cleaner to pick up flammable or combustible

liquids such as gasoline or use in areas where they may be present.

SAVE THESE INSTRUCTIONS

THIS VACUUM CLEANER IS INTENDED

FOR HOUSEHOLD USE ONLY

Notice: Before you plug in your Panasonic Vacuum Cleaner, make sure that

the voltage indicated on the rating plate located at the back of the
vacuum cleaner is the same as your local supply.

-4-

Vac Gauge

PARTS IDENTIFICATION

Headlight

FEATURE CHART

(PANASONIC UPRIGHT VACUUM CLEANER)

^^reATURES

Model
MC-V5117

POWER

120V. AC(60Hz)

10.0 Amps

VAC

GAUGE

Yes

HEADLIGHTCORD

Yes 20

-5-

LENGTH

(feet)

TOOLS

-ON

BOARD

Yes

TO ASSEMBLE CLEANER

A

Do not plug into electrical supply until assembly is complete. To do so could result
in electrical shock or injury.

WARNING

Electrical Shock Hazard.

MTACHING HANDLE TO VACUUM CLiANER

The vacuum cleaner main body and handle are packed separately.

1. The handle screw has
been installed for

shipping purposes.
Please remove the
screw before inserting
the handle. Insert the

handle as shown in the

illustration. Ensure that the
cord hooks are on the
back side of the handle
before inserting.

3. There is a recessed area between
the upper cord hook base and the
handle that is designed to secure
the cord during vacuuming.

2. Line up the small hole in

the handle with the small

hole In the vacuum cleaner
and insert the screw that
you have removed. Use a

screwdriver to assure the

screw is tightened

securely.

4. Loosely wrap the cord around both
cord hooks. Secure the plug head to

the cord by pushing the cord into the

retainers on the plug head.

Always push the power cord ^
down in this recessed area to help
keep the cord from hanging near
the nozzle and being damaged.

USING THE CORD HOOK

1. The upper cord hook has a
quick-release action. To

release the cord, rotate the
hook downward and the
complete power cord will
drop off the hook for
immediate use.

Do not unplug the power cord by
pulling on the cord. Grasp the
plug head and pull to unplug
the vacuum cleaner.

Return the hook to the upright
position before attempting to
rewind the cord.

-6-