Panasonic KX-TGP600, KX-TPA60, KX-UDT131, KX-TPA65, KX-TPA60-K Quick Start Manual

Page 1

TIPT (Telstra IP Telephony)

Page 2

1 WHAT’S INSIDE

02 Let’s get started

03 Getting connected

04 Connecting additional cordless phones

05 Assigning a name / number to identify your cordless phones

06 Disassociating an Additional Handset from the Main Number

07 Re-Pairing a Cordless Phone and Base Unit

08 Problem Solving

Page 3

2 LET’S GET STARTED

Your package contains the following:

• 1x This Quick Start Guide

• 1x Panasonic KX-TGP600 Base Unit

• 1x KX-TPA60 Cordless Phone

• 1x Ethernet Cable

• 1x AC Adapter for Base Unit

• 1x AC Adapter for Charger (Cordless Phone Cradle)

• 2x Batteries

• Manufacturer Warranty Card

• KX-A406AL Repeater/ Extender and power cable (optional)

Page 4

3 GETTING CONNECTED

This section details the setting up a new TGP600 Base unit and the included cordless phone.

Step 1: Set up the new KX-TGP600 Base Unit

• Connect the Ethernet cable (included) to your base unit and to the Ethernet port located

on the back of your TIPT switch/PC.

• Connect the AC adapter for the base unit to the base unit and a power socket.

Ensure that you have plugged the adapter in securely.

• The status indicator on the Base Unit will flash as follows.

1) Solid – Red: When the base unit is turned on, the status indicator turns red for ~40
seconds.

2) Slow Flashing – Amber: The base unit is obtaining an IP address / configurations and
registering with your phone system. Please wait.

3) Solid – Green: The base unit is connected to the TIPT network.

Step 2: Set up the included KX-TPA60 Cordless Phone

• Connect the AC adapter to the charger (phone cradle) and a power socket.

• Insert batteries (included) into the back of the cordless phone.

• Complete the charging cycle by replacing the cordless phone in the charger for 6 hours –

you may choose to complete the charging cycle when you have completed the set up.

Step 3: Activate your TIPT service

• Select Menu > System Settings > System Settings > Authentication

• Select ID – Enter details and select OK.

• Select Password – Enter details and select OK.

• Press the Power / Cancel button to complete the activation process.

• The status indicator on the base unit will flash as follows:

a) Solid – Red: The status indicator will flash solid red for ~20 seconds.
b) Slow flashing – Amber: Next, the status indicator will flash amber for ~50 seconds.
c) Solid – Green: If the configuration is correct, the status indicator will flash solid green.

Quick Tip
Q: Where can I find my Authentication ID and Password?
A: Your ID and Password details will be sent to you via an email. Additional KX-TPA60 or KX-UDT131 cordless phone(s) do
not require an authentication ID or Password – these details are displayed as NULL.

Q: I am still unable to connect successfully, what do I do?
A: Check that you have entered the correct ID and Password by repeating the Step 3. Next, restart the system by

disconnecting and reconnecting the base unit from the power supply. Failing this, call the TIPT Help Desk on 1800 648

116.