Panasonic kx-tgaa470, KXTGA470B, KX-TGA470 User Manual
TGA470(e).fm Page 1 Wednesday, November 16, 2011 10:51 AM
Installation Manual
Additional Digital Cordless Handset
Model No.
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following
series of Panasonic Digital Cordless Phone:
KX-TG4731/KX-TG4741/KX-TG4751/KX-TG4761/
KX-TG4771/KX-TG7731/KX-TG7741
(The corresponding models are subject to change without
notice.)
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit’s operating instructions for further details.
KX-TGA470
Charge the batteries for about 7 hours before initial use.
Please read this installation
manual before using the unit and
save it for future reference.
For assistance, visit our Web site:
http://www.panasonic.com/help
for customers in the U.S.A. or
Puerto Rico.
Printed in China
PNQX5093ZA PT1111MG0 (D)
TGA470(e).fm Page 2 Wednesday, November 16, 2011 10:51 AM
Accessory information
Supplied accessories
Accessory item/Order number Quantity
*1
Charger
AC adaptor/PNLV226Z 1
Rechargeable batteries/HHR-4DPA 2
Handset cover
Belt clip
*1 PNLC1029ZB: Black, PNLC1029ZS: Silver
*2 PNYNTGA470BR: Black
*3 The handset cover comes attached to the handset.
*4 PNKE1132Z1: Black
Note:
LPlease read the base unit’s operating instructions for additional/
replacement accessories.
– Optional headsets: KX-TCA60, KX-TCA93, KX-TCA400,
KX-TCA430
*2, *3
*4
1
1
1
2 For assistance, please visit http://www.panasonic.com/help
TGA470(e).fm Page 3 Wednesday, November 16, 2011 10:51 AM
Setting up
Connections/Wall mounting
25.4 mm
(1 inch)
Screws
(Not supplied)
Note:
LUse only the supplied Panasonic AC adaptor PNLV226.
LThe AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
LMake sure that the wall and the fixing method are strong enough to
support the weight of the unit.
To power outlet
Hooks
Battery installation/Battery charging
Important:
LUse the supplied rechargeable batteries. For replacement, we
recommend using the Panasonic rechargeable batteries noted on
page 2.
LWipe the battery ends (S, T) with a dry cloth.
LAvoid touching the battery ends (S, T) or the unit contacts.
LConfirm correct polarities (S, T).
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
For assistance, please visit http://www.panasonic.com/help 3
TGA470(e).fm Page 4 Wednesday, November 16, 2011 10:51 AM
Charge for about 7 hours.
LWhen the batteries are fully charged, “Fully charged” is displayed.
Rechargeable
Ni-MH ONLY
Note:
LIf the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.
Confirm
“Charging ”
is displayed.
Registering a handset to a base unit
1
Base unit:
Press and hold {LOCATOR} for about 5 seconds.
LDepending on the base unit, a registration tone sounds.
LIf all registered handsets start ringing, press {LOCATOR} again to
stop, then repeat this step.
2 Handset:
Place the handset on the base unit or charger, then wait until a long
beep sounds and w is displayed.
Note:
LIf an error tone sounds, or if _ is displayed, register the handset
according to the base unit’s operating instructions.
4 For assistance, please visit http://www.panasonic.com/help
TGA470(e).fm Page 5 Wednesday, November 16, 2011 10:51 AM
Display language
1
{MENU} (11)
2 {r}: Select the desired setting. s {SAVE}
3 {OFF}
Belt clip
NTo attach NTo r emo ve
For assistance, please visit http://www.panasonic.com/help 5
Loading...