Panasonic KX-TG1034, KX-TG1035 Operating Instructions
Thank you for purchasing a Panasonic cordless telephone.
Please read this Installation Manual before using the unit and save for
future reference.
For assistance, visit our website:
http://www.panasonic.com/help for customers in the U.S.A. or Puerto
Rico.
This handset is an accessory handset for use with Panasonic base units
KX-TG1032/KX-TG1033/KX-TG1034/KX-TG1035. You must register this
handset with your base unit before it can be used.
This installation manual describes only the steps needed to register and
begin using the handset. Please read the base unit’s operating
instructions for further details.
Charge the batteries for 7 hours before initial use.
Expandable Digital Cordless Handset
Model No. KX-TGA101
Installation Manual
PQQX15792ZA FC0107FF0
2 For assistance, please visit http://www.panasonic.com/help
Accessory information
Included accessories
*1 The handset cover comes attached to the handset.
Additional/replacement accessories
Sales and support information
LTo order replacement accessories, call 1-800-332-5368.
LTTY users (hearing or speech impaired users) can call 1-866-605-1277.
Setting up the handset
Connecting the charger
Accessory item Order number Quantity
Charger PQLV30053ZS 1
AC adaptor for charger PQLV209V 1
Batteries HHR-4DPA
(Part No. HHR-55AAABU)
2
Handset cover
*1
PQYNTG1032SR 1
Belt clip PQKE10456Z2 1
Accessory item Order number
Rechargeable nickel metal
hydride (Ni-MH) batteries
HHR-4DPA
(120 V AC, 60 Hz)
Fasten the AC adaptor cord to
prevent it from being disconnected.
Bottom of the charger
Hooks
Hooks
For assistance, please visit http://www.panasonic.com/help 3
Note:
LUse only the included Panasonic AC
adaptor PQLV209.
LThe AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
LThe AC adaptor should be connected
to a vertically oriented or floormounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the
adaptor may cause it to become
disconnected.
Battery installation
1 Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
2 Insert the batteries negative (T) end
first. Close the handset cover.
Important:
LUSE ONLY Ni-MH batteries AAA
(R03) size.
LDo NOT use Alkaline/Manganese/Ni-
Cd batteries.
LInstall the batteries in proper order
(S, T), matching the correct polarity.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the charger for 7
hours before initial use.
Note:
LIf you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
LTo ensure that the batteries charge
properly, clean the charge contacts of
the handset and charger with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Charge
contacts
4 For assistance, please visit http://www.panasonic.com/help
Panasonic battery performance
Note:
LThe handset can be left on the
charger without any ill effect on the
batteries.
LThe battery level may not be
displayed correctly or the entire
display may go blank after you
replace the batteries. In this case,
place the handset on the charger and
let charge for 7 hours.
Registration
Register the handset to a KX-TG1032/
KX-TG1033/KX-TG1034/KX-TG1035
base unit.
1 Base unit:
Press and hold {LOCATOR} until
the registration tone sounds.
LIf all registered handsets start
ringing, press {LOCATOR} to
stop, then repeat this step.
LAfter the base unit beeps, the rest
of the procedure must be
completed within 1 minute and 30
seconds.
2 Handset:
Press {OK}, then wait until a beep
sounds and w stops flashing.
Changing the display
language
1 {MENU}
2 {V}/{^}: “Handset settings” i
{OK}
3 {V}/{^}: “Display settings” i
{OK}
4 {V}/{^}: “Change language” i
{OK}
5 {V}/{^}: Select the desired setting.
6 {OK} i {OFF}
Belt clip
You can hang the handset on your belt
or pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip(A),
pull the right edge in the direction of the
arrow (B).
Operation Operating time
While in use
(talking)
Up to 17 hours
While not in use
(standby)
Up to 7.5 days
A
B
For assistance, please visit http://www.panasonic.com/help 5
Headset (optional)
Connecting a headset to the handset
allows hands-free phone
conversations. We recommend using a
Panasonic KX-TCA60/KX-TCA86/KXTCA88HA/KX-TCA92/KX-TCA93/KXTCA94/KX-TCA95 headset. See page
2 for ordering information.
LHeadset shown is KX-TCA86.
Specifications
■ Standard:
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
■ Number of channels:
60 Duplex Channels
■ Frequency range:
1.92 GHz to 1.93 GHz
■ Duplex procedure:
TDMA (Time Division Multiple Access)
■ Channel spacing:
1,728 kHz
■ Bit rate:
1,152 kbit/s
■ Modulation:
GFSK (Gaussian Frequency Shift
Keying)
■ RF transmission power:
Approx. 100 mW
■ Voice coding:
ADPCM 32 kbit/s
■ Power source:
120 V AC, 60 Hz
■ Power consumption:
Charger:
Standby: Approx. 0.7 W
Maximum: Approx. 3.5 W
■ Operating conditions:
5 °C – 40 °C (41 °F – 104 °F), 20 % – 80
% relative air humidity (dry)
■ Dimensions:
Handset: Approx. 169 mm × 49 mm ×
35 mm
(6
21
/32inches × 115/16inches × 13/
8
inches)
Charger: Approx. 51 mm × 81 mm × 91
mm
(2 inches × 3
3
/16inches × 319/
32
inches)
■ Mass (weight):
Handset: Approx. 140 g (0.31 lb.)
Charger: Approx. 70 g (0.15 lb.)
Note:
LDesign and specifications are subject
to change without notice.
LThe illustrations in these instructions
may vary slightly from the actual
product.
Loading...