Installation Manual
Additional Digital Cordless Handset
Model No. KX-PRSA10E
KX-PRWA10E
KX-PRSA10 KX-PRWA10
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following series of
Panasonic Digital Cordless Phone:
- KX-PRS120 (KX-PRSA10)
- KX-PRW120 (KX-PRWA10)
(The corresponding models are subject to change without notice.)
You must register this handset with your base unit before it can be used. This
installation manual describes only the steps needed to register and begin using
the handset. Please read the base unit’s operating instructions for further details.
Please read this installation manual before using the unit and save it for future
reference.
PRWA10E_PRSA10E(en)_0508_ver012.1 1 2013/05/08 22:39:34
Accessory information
Supplied accessories
Accessory item/Part number Quantity
Charger
*1
1
AC adaptor/PNLV233EKZ 1
Rechargeable batteries
*2
2
Handset cover
*3
1
*1 KX-PRSA10: PNLC1047ZW (White)
KX-PRWA10: PNLC1046ZW (White)
*2 Please read the base unit’s operating instructions for replacement battery
information.
*3 The handset cover comes attached to the handset.
Note:
R Please read the base unit’s operating instructions for additional/replacement
accessories.
R Please read "General information" of the base unit’s operating instructions for
information regarding R&TTE Directive.
2
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Installation
PRWA10E_PRSA10E(en)_0508_ver012.2 2 2013/05/08 22:39:34
Setting up
Connections
Connect the AC adaptor plug to the unit until you hear a click.
Connect the AC adaptor to the power outlet.
KX-PRSA10: Fasten the cord by hooking it.
n KX-PRSA10 n KX-PRWA10
Note:
R Use only the supplied Panasonic AC adaptor PNLV233E.
R The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
Battery installation/Battery charging
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (A).
R Do NOT use Alkaline/Manganese/Ni-Cd batteries.
R Confirm correct polarities (
, ).
Charge for about 7 hours.
R Confirm “Charging” is displayed (B).
R When the batteries are fully charged, “Fully charged” is displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
3
Installation
PRWA10E_PRSA10E(en)_0508_ver012.3 3 2013/05/08 22:39:34