PANASONIC KXMB2010E, KXMB2030E User Manual

Important Information Guide
Multi-Function Printer
Model No. KX-MB2000E
KX-MB2010E KX-MB2025E KX-MB2030E
Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup
of Multi-Function Station (CD-ROM).
Accessory information: To ensure that the unit operates properly, we recommend the use of Panasonic toner and drum cartridges.
n Replacement accessoryToner cartridge
R Model No. (Part No.): KX-FAT411X
Drum cartridge
R Model No. (Part No.): KX-FAD412X
Sales and Support Information
Customer Care Centre
R For customers within the UK:
0844 844 3878 (for fax machine) 0844 844 3867 (for MFP)
R For customers within the Republic of Ireland:
01 6130082 (for fax machine) 01 2898255 (for MFP)
R Visit our website for product information R E-mail:
customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
R Order accessory and consumable items for
your product with ease and confidence by phoning our Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays).
R Or go on line through our Internet Accessory
ordering application at www.panasonic.co.uk.
R Most major credit and debit cards accepted. R All enquires transactions and distribution
facilities are provided directly by Panasonic UK Ltd.
R It couldn’t be simpler! R Also available through our Internet is direct
shopping for a wide range of finished products, take a browse on our website for further details.
The supplied Setup CD-ROM provides the Operating Instructions in PDF format with a detailed description on how to use the unit. Adobe® Reader® is required to view them. Please read before using the unit and save the CD-ROM for future reference.
User record (for your future reference)
Date of purchase
Serial number (found on the rear of the unit)
Dealer’s name and address
Dealer’s telephone number
Attach your sales receipt here.
Note:
R Save the original carton and packing materials for
future shipping and transportation of the unit.
R After unpacking the product, take care of the packing
materials and/or power plug cap appropriately.
R The suffix in the model number will be omitted in
these instructions.
R Most figures shown in these instructions are based
on a KX-MB2030.
Caution: R When you operate this product, the power outlet
should be near the product and easily accessible.
R Be sure to use the telephone line cord supplied
with this unit (KX-MB2025/KX-MB2030 only).
R Do not extend the telephone line cord
(KX-MB2025/KX-MB2030 only).
R In the event of problems, you should contact your
equipment supplier in the first instance (KX-MB2025/ KX-MB2030 only).
R This equipment is designed for use on the UK and
Republic of Ireland analogue telephone network (KX-MB2025/KX-MB2030 only).
Declaration of Conformity (KX-MB2025/KX-MB2030 only):
R Panasonic System Networks Co., Ltd. declares that
this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.doc.panasonic.de
Winsbergring 15, 22525 Hamburg, Germany
Information of Compliance with EU relevant Regulatory Directives (KX-MB2000/KX-MB2010 only):
R Contact to Authorised Representative:
Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany
ENERGY STAR:
R As an ENERGY STAR® Partner, Panasonic has
determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
Trademarks:
R Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
R All other trademarks identified herein are the property
of their respective owners.
Copyright:
R This material is copyrighted by Panasonic System
Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.
© Panasonic System Networks Co., Ltd. 2009
Table of Contents
1.1 For your safety 3
1.2 Important safety instructions 5
1.3 Information for Users on Collection and Disposal of Old Equipment and used Batteries
1.4 Illegal copies 6
1.5 Important Information 7
1.6 Extension telephone adaptor for UK (KX-MB2025/KX-MB2030 only)
1.7 Turning the power switch ON 9
1.8 Selecting the operation mode (Scan/ Copy) (Fax: KX-MB2025/KX-MB2030 only)
1.9 Setting the original 9
1.10 Display messages 10
5
9
9
Contact to Authorised Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH
2

1.1 For your safety

To prevent severe injury and loss of life/property,
1. . Important Information
read this section carefully before using the unit to ensure proper and safe operation of your unit.
1. Important Information
For safety purposes this unit is equipped with a grounded plug. If you do not have this type of outlet, please have one installed. Do not ignore this safety feature by tampering with the plug.
R The following symbols are used to classify and
describe the level of hazard and injury caused when the denotation is disregarded and improper use is performed.
Denotes a potential hazard that could result in serious injury or death.
Denotes hazards that could result in minor injury or damage to the unit.
R The following symbols are used to classify and
describe the type of instructions to be observed.
This type of symbol is used to alert users to a specific operating procedure that must be performed carefully.
This type of symbol is used to alert users to a specific operating procedure that must not be performed.
This type of symbol is used to alert users to a specific operating procedure that must be emphasized in order to operate the unit safely.
Do not place objects on the mains lead. Install the unit where no one can step or trip on the cord.
Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock.
Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
Never touch the plug with wet hands. There is a danger of electric shock.
Installation
Place the unit securely on a stable, level surface. Serious damage and/or injury may result if the unit falls.
To prevent the risk of fire or electrical shock, do not expose this product to rain or any type of moisture.
Power and ground connection
Unplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised service centre.
Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
Detailed operating instructions are on the CD-ROM.
Make sure that the unit is installed in a well ventilated room so as not to increase density of ozone in the air. Since ozone is heavier than air, it is recommended that air at floor level be ventilated.
Operating safeguards
Turn the power switch OFF before cleaning. Do not use liquid or aerosol cleaners.
Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided.
3
1. Important Information
Never push any objects through slots in this unit. This may result in the risk of fire or electric shock. Never spill any liquid on the unit.
To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorised service centre when service is required. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.
Follow all warnings and instructions marked on this unit.
Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall socket, and do not use (KX-MB2025/KX-MB2030 only).
Unplug this unit from power outlets and refer servicing to an authorised service centre when any of the following conditions occur:
R If the mains lead is damaged or
frayed.
R If the unit has been exposed to rain or
water, or liquid has been spilled into the unit. Do not use a microwave oven to speed up the drying process of any parts of the unit to avoid permanent damage.
R If the unit does not work normally by
following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorised service centre.
R If the unit has been dropped or
physically damaged.
R If the unit exhibits a distinct change in
performance.
Installation and relocation
After moving the unit from cold areas to warmer areas, wait approximately 30 minutes before turning on the power switch to allow the unit to adjust to the ambient temperature. If the power switch is turned on too soon after a sudden climate change, condensation may form inside the unit, causing malfunction.
Never turn the unit upside down or sideways when moving it.
Never install telephone wiring during a lightning storm (KX-MB2025/ KX-MB2030 only).
Never install telephone sockets in wet locations unless the socket is specifically designed for wet locations (KX-MB2025/ KX-MB2030 only).
Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface (KX-MB2025/KX-MB2030 only).
Use caution when installing or modifying telephone lines (KX-MB2025/ KX-MB2030 only).
Do not position the unit in a location where it is unstable or subject to vibrations.
USB cable/LAN cable
To assure continued emission limit compliance; R use only shielded USB cable
(Example: Hi-Speed USB 2.0 certified cable).
R use only shielded LAN cable
(category 5 straight cable) (KX-MB2000/KX-MB2010/ KX-MB2030 only).
4
Detailed operating instructions are on the CD-ROM.
Loading...
+ 8 hidden pages