Panasonic kx-hnc710 Operation Manual
Installation Guide
Home Monitoring Camera
HomeHawk Outdoor
Model No. KX-HNC710
Thank you for purchasing a Panasonic product.
This document explains how to install the outdoor camera properly.
to the Installation Guide supplied with KX-HN7001/KX-HN7002/
Refer
KX-HN7003 for details.
Charge the camera for about 7 hours before camera installation
(page 14). Then register the camera to the access point
(page 16).
Please read this document before using the unit and save it for future
reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web
site:
http://shop.panasonic.com/support for customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
Printed in China
Table of Contents
Introduction
Accessory information ...............3
Important Information
Graphical symbols for use on
equipment and their
descriptions ...............................4
About this system ......................4
For your safety ...........................
Important safety instructions ......7
Privacy and rights of portrait ......7
Other information .......................7
Installation Location
Installation location
examples .................................10
Do not install in these
locations ..................................11
Setup
Part names and functions ........13
Charging the camera ...............14
Charging LED indicators ..........15
Turning the power on for the
camera .....................................16
Registering the camera ...........16
Confirming the camera installation
area .........................................17
Installation ...............................17
Accessing the User’s Guide ....20
Appendix
Specifications ..........................21
FCC and other information ......21
Customer services ...................23
Limited Warranty (ONLY FOR
U.S.A.) .....................................24
4
2
Introduction
Accessory information
Supplied accessories
No. Accessory item/Part number Qty.
A USB cable/PNWYAC700W00 1
B Wall mounting adaptor/PNWYAC710W00 1
C
Wall mounting screws 25 mm (1 inch)/PNWYAC700W02
D Suspension wire tool
– Safety wire/PNWYAC710W01
– Washer/PNWYAC710W02
The washer for attaching safety wire to wall ø16 mm (5/8 inches)
– Safety wire ring/PNWYAC710W03
The safety wire ring for attaching the safety wire to the camera
*1 The supplied screws can be used as follows.
– 2 screws for the wall mounting adaptor
– 1 screw for suspension wire tool
A
B C D
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
R HomeHawk Outdoor is referred to as outdoor camera or camera in this document.
*1
3
1
Trademarks
R Android and Google Play are registered trademarks or trademarks of Google Inc.
R Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
R All other trademarks identified herein are the property of their respective owners.
For assistance, please visit http://shop.panasonic.com/support
3
Important Information
Graphical symbols for use on equipment and their descriptions
Symbol Explanation Symbol Explanation
Alternating current (A.C.) Class P equipment
(equipment in which protection
against electric shock relies on
Double Insulation or
Reinforced Insulation)
Direct current (D.C.) “ON” (power)
Protective earth “OFF” (power)
Protective bonding earth Stand-by (power)
Functional earth “ON”/“OFF” (power; push-push)
For indoor use only Caution, risk of electric shock
situations cannot be guaranteed.
About this system
R This system is an auxiliary system; it is not
designed to provide complete protection
from property loss. Panasonic will not be
held responsible in the event that property
loss occurs while this system is in
operation.
R The system’s wireless features are subject
to interference, therefore functionality in all
Panasonic will not be held responsible for
injury or damage to property that occurs in
the event of wireless communication error
or failure.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
For a
4
ssistance, please visit http://shop.panasonic.com/support
Important Information
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the 5.0 V, 1.0 A or higher
power source.
R Do not overload power outlets and
extension cords. This can result in
the risk of fire or electric shock.
R Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These conditions
can cause fire or electric shock.
Confirm that smoke has stopped
emitting and contact us at http://
shop.panasonic.co
R Unplug from power outlets and
never touch the inside of the
product if its casing has been
broken open. Danger of electric
shock exists.
R Never touch the plug with wet
hands. Danger of electric shock
exists.
R Do not connect non-specified
devices.
Installation
R Do not place or use this product
near automatically controlled
devices such as automatic doors
and fire alarms. Radio waves
For assistance, please visit http://shop.panasonic.com/support
m/support
emitted from this product may
cause such devices to malfunction
resulting in an accident.
R Do not allow the power cord to be
excessively pulled, bent or placed
under heavy objects.
R Do not mount the bracket in a
location higher than 2.2 m (7 feet 3
inches), in an unstable location, in a
location subject to frequent
vibration, on a ceiling, or on a weak
wall. (Do not mount on gypsum
board, concrete blocks, wooden
materials exposed to the outdoors,
walls with very rough surfaces, or
surfaces that are narrower than the
width of the wall mount bracket.)
There is a risk of injury if the
product falls, or of fire or electric
shock if water enters the product.
R Keep small parts (screws, washers,
etc.) out of the reach of children.
There is a risk of swallowing. In the
event they are swallowed, seek
medical advice immediately.
Operating safeguards
R Unplug the product from power
outlets before cleaning. Do not use
liquid or aerosol cleaners.
R Do not disassemble the product.
R Never put metal objects inside the
product. If metal objects enter the
product, turn off the circuit breaker
and contact an authorized service
center.
5
Important Information
Medical
R Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. Wireless LAN
features operate between
2.412 GHz and 2.462 GHz with a
peak transmission power of 100
mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not
to do so. Hosp
facilities may be using equipment
that could be sensitive to external
RF energy.
itals or health care
CAUTION
Installation and location
R Never install wiring during a
lightning storm.
R Although this camera conforms to
the IPX5* code, do not intentionally
expose it to water.
*IPX5 indicates that the product is
protected against water jets: water
projected at all angles through a
6.3 mm (1/4 inches) nozzle flow rate
of 12.5 liters/minute at a pressure
of 30 kN/m2 for 3 minutes from a
distance of 3 meters (9 feet 10
inches).
R Although this camera conforms to
the IP6X* code, do not intentionally
expose it to grit and dust.
*IP6X indicates that the product is
protected against grit and dust: this
product has shown the capabilities
of preventing dust from entering
inside the product after the product
was in a device that contained dust
with a diameter of 75 µm or less for
7 hours and was shaken and
removed from that device.
R The USB cable is used as the main
disconnect device. Ensure that the
AC outlet is installed near the
product and is easily accessible.
R Do not place magnetic cards or
similar objects near the outdoor
camera. Magnetic data on the
cards, etc. may be deleted.
Preventing accidents and injuries
R The safety wire must be used when
mounting the product. There is a
risk of injury if the product falls.
R Do not put your ear(s) near the
speaker, as loud sounds emitted
from the speaker may cause
hearing impairment.
Lithium Ion (Li-Ion) battery (built-in
battery)
R CAUTION:
Risk of explosion if battery is
replaced by an incorrect type.
For a
6
ssistance, please visit http://shop.panasonic.com/support
Dispose of used battery according
to local regulations.
Important safety instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Use only the power cord indicated in this
document.
SAVE THESE INSTRUCTIONS
Privacy and rights of portrait
When installing or using the camera, please
take into consideration the rights of others with
regard to privacy.
It is generally said that “privacy” means the
ability of an individual or group to stop
information about themselves from becoming
known to people other than those whom they
choose to give the information. “Rights of
portrait” means the right to be safe from
having y
our own image taken and used
indiscriminately without consent.
Important Information
Other information
This product has a rechargeable lithium ion
battery. Do not throw into fire, apply heat, or
charge, use, or leave in a high temperature
environment.
– Doing so may cause fluid leak,
overheating, or explosion.
Routine care
R Wipe the outer surface of the product with
a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Camera image quality
R Camera images may have the following
characteristics.
– Colors in images may differ from the
actual colors.
– When there is light behind the subject
(i.e., backlighting), faces may appear
dark.
– Image quality may be reduced in dark
locations.
– Images may appear hazy when there
are outdoor lights in use.
Notice for product disposal, transfer, or
return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information from the memory
For assistance, please visit http://shop.panasonic.com/support
7
1
2
3
4
6
5
8
7
2
2
2
Important Information
before you dispose of, transfer, or return
the product.
Notice for built-in battery
ATTENTION:
A lithium ion battery that is recyclable powers
the product you have purchased. Please call
1-800-8-BATTERY (1-800-822-8837) for
information on how to recycle this battery.
WARNING for Lithium Ion (Li-Ion) Battery:
Risk of fire and burns. Do not open, crush,
heat above 50 °C (122 °F) or incinerate.
Follow the instructions in the operating
instructions.
Remove the built-in rechargeable battery
before disposing of the cameras. Do not
dismantle or replace the battery so that you
can use the camera again. This could cause
fire or an electric shock. Replace it at an
authorized service center.
Battery removal procedure
R Disconnect the power cord from the
camera when removing the battery.
Battery
R Perform steps A to H, lift the
battery (
For a
8
ssistance, please visit http://shop.panasonic.com/support
), and then remove it.
Notice
Important Information
For a
ssistance, please visit http://shop.panasonic.com/support
9
1
1
Installation Location
Installation location examples
I want to detect visitors approaching the house
Refer to the table below for detecting visitors at an entrance or gate without detecting cars in the
street.
Ideal example Poor example
Approx. 6 m (19 feet 8 inches)
Visitors pass in front of the camera from side
to side, cars in the street are less likely to
cause false detections.
Note:
R The visual detection range is as follows.
– Horizontal: 150°
– Vertical: 85°
For a
10
ssistance, please visit http://shop.panasonic.com/support
Cars in the street are more likely to cause
false detections.
Installation Location
I want to detect people entering the garage
Refer to the table below for detecting people entering a garage without detecting cars in the street.
Ideal example Poor example
Visitors pass in front of the camera from side
to side, cars in the street are less likely to
cause false detections.
R To prevent faces from being obscured by
tall vehicles, adjust the installation position
and angle of the camera.
Note:
R The visual detection range is as follows.
– Horizontal: 150°
– Vertical: 85°
Do not install in these locations
Installing in the following areas may cause
deformation, discoloration, malfunction, or
operational failure
R In direct sunlight or directly under an
outdoor light (even if the surroundings are
For assistance, please visit http://shop.panasonic.com/support
Cars in the street are more likely to cause
false detections.
within operational temperature range, parts
of the product may become hot)
R Areas subject to frequent vibration, shock,
or impact
R Near fire, heating devices, or air
conditioners (including outdoor equipment
such as unit compressors)
R Areas exposed to grease or steam
R Near devices that emit strong radio waves,
such as mobile phones
11
Installation Location
R Areas subject to extreme temperature
changes (which can lead to condensation).
If condensation occurs, wipe the outer
surface of the product with a soft dry cloth.
R Near coasts directly subjected to sea
breezes, or near sulfuric hot springs
(exposure to salt can shorten the life of the
product)
R Near TVs, radios, automated office
equipment such as computers, air
conditioners, water heater panels (with
intercom), or home security equipment
(these may cause noise)
R Near satellite broadcasting receivers such
as tuners, TVs with built-in satellite tuners,
and recorders (broadcasted images may
be distorted)
R Areas where hydrogen sulfide, ammonia,
dust, or toxic gases are present
Installing in the following areas may cause
false detections
R Areas where people approach directly from
the front of the camera, such as narrow
walkways
R Areas where objects such as trees or
hanging laundry move due to wind
(temperature variation and motion may
cause false detections)
R Areas affected by breezes from fans, air
conditioning unit compressors, water
heaters, or car exhaust (severe
temperature variations may cause false
detections)
R Areas subject to severe weather, such as
strong wind (camera shake can cause
false detections) or rain (strong rain may
be detected as an object moving in front of
the camera)
R Areas with reflective objects, such as
glass, that can interfere with detection of
temperature variation
R Areas where brightness changes easily
R Areas where backlight occurs (faces
appear dark and are difficult to identify),
such as the following
– Areas where most of the background is
the sky
– Areas where direct sunlight reflects off
a white wall or background
– Bright areas such as those exposed to
direct sunlight
12
For a
ssistance, please visit http://shop.panasonic.com/support
A
G
J
H
B
D
E
F
N
M
L
K
I
C
Setup
Part names and functions
A White LED lens H Speaker
B Lens I MS
C Infrared sensors J Power slide switch
D LED indicator K Charging LED indicator
E Microphone L Camera nut
F Light sensor M USB cover/micro-USB connector
G Interface cover N Wall mounting adaptor
LED indicators
Y
ou can use the LED indicators to confirm the camera’s status.
LED indicator Status
Off R N
ETUPN
o power
R More than 5 seconds have passed
since turning on the power when the
camera is not registered to the access
point
R LED indicator is turned off
*1
For a
ssistance, please visit http://shop.panasonic.com/support
13
Setup
LED indicator Status
*
Green or amber, blinking
uickly - off for 1 second
q
Amber, lit
Camera is on
Not registered to the access point
signal level is good
Green, lit Registration successfully completed or
s
ignal level is strong
Green, blinking quickly
Red, lit
Camera is searching for an access point
Registration failed, signal level is weak
or detecting motion
Red, blinking quickly
Amber, blinking slowly
Streaming data
Battery is running low
Green, blinking slowly Registration mode, updating
Red, blinking slowly Camera is out of range of the access
*1, *3
oint
p
*1 You can configure the camera so that its LED indicator does not light
uring normal operation. For more information, refer to the User’s
d
Guide (page 20).
*2 The LED indicator lights in amber for 5 seconds after the power is
turned on for the camera.
*3 The signal level (strong, good, weak, out of range) is shown after
pressing MSETUPN for 3 seconds.
1
2
*
*3
*3
*1
*
1
*
1
, or
*
1
*
3
,
Charging the
c
amera
R This camera has an internal
rechargeable battery.
R Remove the camera from the
wall before charging.
For a
14
ssistance, please visit http://shop.panasonic.com/support
R M
ake sure to charge the
camera indoors and in a dry
location.
R Charge the camera in a location
with a temperature between
5 °C and 40 °C (41 °F and
104 °F). The camera cannot
Loading...