Installation Guide
Home Network System
Outdoor Camera
Model No. KX-HNC600FX
Thank you for purchasing a Panasonic product.
This document explains how to install the outdoor camera properly.
For details about how to use the system, refer to the User’s Guide (page 27).
Please read this document before using the unit and save it for future reference.
Table of Contents |
|
Introduction |
|
Accessory information .................................. |
3 |
Important Information |
|
About this system ......................................... |
5 |
For your safety ............................................. |
5 |
Important safety instructions ........................ |
6 |
For best performance ................................... |
6 |
Privacy and rights of portrait ........................ |
7 |
Other information ......................................... |
7 |
Installation Location |
|
Wireless communication range .................... |
9 |
Information about sensor features ............... |
9 |
Information about night vision mode .......... |
11 |
Installation location examples .................... |
12 |
Do not install in these locations .................. |
14 |
Setup |
|
Part names and functions .......................... |
16 |
LED indicator .............................................. |
16 |
Setup overview ........................................... |
16 |
Registering the camera .............................. |
16 |
Confirming the installation area .................. |
17 |
Installation .................................................. |
18 |
Appendix |
|
Testing the motion detection range ............ |
23 |
Adjusting the infrared sensor range ........... |
23 |
Features available when using the [Home |
|
Network] app .............................................. |
27 |
Accessing the User’s Guide ....................... |
27 |
Specifications ............................................. |
28 |
2
|
|
|
|
|
Introduction |
Accessory information |
|
|
|||
Supplied accessories |
|
|
|
||
No. |
Accessory item/Part number |
|
Quantity |
||
A |
AC adaptor/PNLV236CE |
|
|
1 |
|
B |
Camera mounting stand |
|
|
1 |
|
C |
Wall mounting screws (25 mm) |
|
4 |
||
D |
Suspension wire tool |
|
|
1 |
|
|
– |
Safety wire: 1 |
|
|
|
|
– |
Washers: 2 |
|
|
|
|
|
Small washer for attaching safety wire to camera |
|
||
|
|
ø12 mm |
|
|
|
|
|
Large washer for attaching safety wire to wall |
|
|
|
|
|
ø16 mm |
|
|
|
|
– |
Screws: 2 |
|
|
|
|
|
Small screw for attaching safety wire to camera |
|
||
|
|
10 mm |
|
|
|
|
|
Large screw for attaching safety wire to wall |
|
|
|
|
|
25 mm |
|
|
|
E |
Sensor range cap |
|
|
1 |
|
A |
|
B |
C |
D |
E |
Additional accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item |
Order number |
DC extension cord*1 |
PNJA1159Z |
*1 Designed for indoor use only. Do not use outdoors.
Other information
RDesign and specifications are subject to change without notice.
RThe illustrations in these instructions may vary slightly from the actual product.
3
Introduction
Trademarks
RmicroSDHC is a trademark of SD-3C, LLC.
RiPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
RAndroid is a trademark of Google Inc.
RMicrosoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
RAll other trademarks identified herein are the property of their respective owners.
Notice
RThe hub supports microSD and microSDHC memory cards. In this document, the term “microSD card” is used as a generic term for any of the supported cards.
4
RThis system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.
RThe system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed.
Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure.
To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
RUse only the power source marked on the product.
RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.
RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
RRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
RUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact an authorised service centre.
RUnplug from power outlets and never touch the inside of the product if its casing has
been broken open. Danger of electric shock exists.
RNever touch the plug with wet hands. Danger of electric shock exists.
RDo not connect non-specified devices.
RWhen opening holes in walls for installation or wiring, or when securing the power cord, make sure you do not damage existing wiring and ductwork.
RDo not leave the power cable exposed outdoors.
Installation
RDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
RDo not allow the power cord to be excessively pulled, bent or placed under heavy objects.
RDo not mount the bracket in an unstable location, in a location subject to frequent vibration, on a ceiling, or on a weak wall.
(Do not mount on gypsum board, concrete blocks, wooden materials exposed to the outdoors, walls with very rough surfaces, or surfaces that are narrower than the width of the wall mount bracket.) There is a risk of injury if the product falls, or of fire or electric shock if water enters the product.
RKeep small parts (microSD cards, screws, washers, sensor range caps, etc.) out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.
Operating safeguards
RUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.
RDo not disassemble the product.
RKeep the sensor range caps out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.
RNever put metal objects inside the product. If metal objects enter the product, turn off
5
Important Information
the circuit breaker and contact an authorised service centre.
Medical
RConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.88 GHz and 1.90 GHz with a peak transmission power of 250 mW.
RDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
CAUTION
Installation and location
RNever install wiring during a lightning storm.
RAlthough this product conforms to the IPX5* code, do not intentionally expose it to water. *IPX5 indicates that the product is protected against water jets: water projected at all angles through a 6.3 mm nozzle flow rate of 12.5 litres/minute at a pressure of 30 kN/m2 for 3 minutes from a distance of 3 metres.
RThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.
RIf the wiring is underground, do not make any connections underground.
RIf the wiring is underground, make sure the power cable and other wiring is properly waterproofed by running the cables through a conduit.
Preventing accidents and injuries
RThe safety wire must be used when mounting the product. There is a risk of injury if the product falls.
RDo not put your ear(s) near the speaker, as loud sounds emitted from the speaker may cause hearing impairment.
When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Use only the power cord indicated in this document.
SAVE THESE INSTRUCTIONS
Hub location/avoiding noise
The hub and other compatible Panasonic devices use radio waves to communicate with each other.
RFor maximum coverage and noise-free communications, place your hub:
–at a convenient, high, and central location with no obstructions between the product and hub in an indoor environment.
–away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.
–facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the hub on a bay window or near a window.)
RIf the reception for a hub location is not satisfactory, move the hub to another location for better reception.
Environment
RKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.
RThe product should be kept free from excessive smoke, dust, high temperature, and vibration.
RDo not expose this product to direct sunlight or other forms of powerful light such as halogen lights for long periods of time. (This may damage the image sensor.)
6
Important Information
RDo not place heavy objects on top of the product.
RWhen you leave the product unused for a long period of time, unplug the product from the power outlet.
RThe product should be kept away from heat sources such as radiators, cookers, etc. It should not be placed in rooms where the temperature is less than -20 °C or greater than 50 °C. Damp basements should also be avoided.
RDo not allow the lens cover or the infrared sensor to become scratched or dirty. (This may cause image quality to be reduced, incorrect detections, malfunctions, or damage to the lens cover and infrared sensor.)
ROperating the product near electrical appliances may cause interference. Move away from the electrical appliances.
When installing or using the camera, please take into consideration the rights of others with regard to privacy.
It is generally said that “privacy” means the ability of an individual or group to stop information about themselves from becoming known to people other than those whom they choose to give the information. “Rights of portrait” means the right to be safe from having your own image taken and used indiscriminately without consent.
Routine care
RTo prevent incorrect detections, unplug the product before performing routine care.
RWipe the outer surface of the product with a soft moist cloth.
RDo not use benzine, thinner, or any abrasive powder.
RDo not apply running water to the product.
Camera image quality
RCamera images may have the following characteristics.
–Colours in images may differ from the actual colours.
–When there is light behind the subject (i.e., backlighting), faces may appear dark.
–Image quality may be reduced in dark locations.
–Images may appear hazy when there are outdoor lights in use.
Protecting your recordings
RDo not remove the microSD card or disconnect the hub’s AC adaptor while reading or writing data to the microSD card. Data on the card could become corrupted.
RIf a microSD card malfunctions or is exposed to electromagnetic waves or static electricity, data on the card could become corrupted or erased. Therefore we recommend backing up important data to a computer or other device.
Disposal of Old Equipment (Only for European Union and countries with recycling systems)
This symbol on the products, packaging, and/ or accompanying documents means that used electrical and electronic products must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality.
7
Important Information
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
8
The wireless communication range of each device in the system from the hub is approximately 50 m indoors and approximately 300 m outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices.
RMetal doors or screens
RWalls containing aluminium-sheet insulation
RWalls made of concrete or corrugated iron
RDouble-pane glass windows
RMultiple walls
RWhen using each device on separate floors or in different buildings
Note:
RThe camera’s LED indicator blinks in red if it is out of range of the hub. In this case, confirm all connections, including those of the hub.
The camera has 2 sensor features that are used for motion detection: a visual sensor and an infrared sensor (i.e., heat sensor).
Please read the following information before deciding where to install the camera.
Note:
RThe camera’s sensor features are not designed to be used in situations that require high reliability. We do not recommend use of the sensor features in these situations.
RPanasonic takes no responsibility for any injury or damage caused by the use of the camera’s sensor features.
Detection method
Visual sensor |
Infrared sensor |
The camera detects changes in the images |
The camera detects temperature differences |
being displayed. |
of objects in the images being displayed. |
R The camera detects changes in the |
R The infrared sensor uses infrared rays to |
brightness levels of moving objects. |
detect temperature differences within its |
|
range that are emitted naturally by people, |
|
animals, etc. |
9
Installation Location
Detection range
Visual sensor |
Infrared sensor |
Can detect motion anywhere in the visible |
Can detect motion only in part of the visible |
image. |
image (shown here in grey) |
|
|
|
|
R You can adjust the area detectable by the |
R You can adjust the area detectable by the |
||
visual sensor. For more information, refer |
infrared sensor. See “Adjusting the infrared |
||
to the User’s Guide (page 27). |
sensor range”, page 23. |
||
|
|
|
R Detection does not occur when there are |
|
|
|
obstacles in front of the infrared sensor. |
|
|
|
Remove the obstacles or change the |
|
|
|
installation location. |
Main characteristics
Visual sensor |
Infrared sensor |
Easily detects movement in the daytime or |
Easily detects when there is a big difference |
when it is bright. |
between the temperatures of objects and the |
R Movement may be incorrectly detected |
surrounding environment, such as in winter or |
when the moving object and the |
late at night. |
background have a similar colour. |
R The sensor cannot easily detect when |
R Movement may be incorrectly detected |
there is no difference between the |
when there are sudden changes to the |
temperatures of objects and the |
overall brightness levels such as when |
surrounding environment, such as in |
external lights are used. |
summer or during the daytime. |
|
R If the camera is mounted facing a road, the |
|
sensor may detect incorrectly due to |
|
interference caused by the heat from |
|
passing cars. |
10