Resetting the hub’s settings ............................115
Copyright information ......................................116
Open source software information ..................116
Software information .......................................116
Troubleshooting
About this document
3
Welcome to the Panasonic Home Network System!
Overview
The Panasonic Home Network System is a wireless network of powerful devices that help you monitor,
control, and manage your home. Its easy-to-use app allows you to stay in charge even when away from
home.
4
Monitoring
Welcome to the Panasonic Home Network System!
You can use your smartphone or tablet to watch live images from your cameras, even when away from
home. You can even talk to and listen to your cameras.
Select an item to learn more.
5
Welcome to the Panasonic Home Network System!
Peace of mind
You can use a variety of sensors, including motion sensors, window sensors, door sensors, and the
sensor features built in to cameras, to trigger camera recording features, call a pre-programmed phone
number when the alarm system is triggered, sound a siren, or send a notification to your smartphone or
tablet.
Additionally, backup batteries can supply power to your devices in the event of a power failure.
Select an item to learn more.
6
Convenience
Welcome to the Panasonic Home Network System!
You can use your smartphone or tablet to turn on lights or other appliances that are connected to your
smart plugs.
By installing keypads near frequently used entrances, you can arm and disarm the system easily on your
way out or as soon as you walk in the door.
Additionally, keychain remotes allow you to quickly arm and disarm the system with a simple press of a
button, with no screen locks or passwords to slow you down.
You can even integrate a compatible Honeywell thermostat with the system.
Select an item to learn more.
*1 Smart plug appearance varies by region.
*1
7
Welcome to the Panasonic Home Network System!
Damage protection
You can use water leak sensors to notify your smartphone or tablet when water is detected.
Select an item to learn more.
8
Communication
Welcome to the Panasonic Home Network System!
You can use your smartphone, tablet, or a cordless handset to make and receive phone calls using your
landline while at home.
Select an item to learn more.
9
Welcome to the Panasonic Home Network System!
Overview
The Home Network System can be expanded to suit your needs. You can choose a pre-configured
bundle, add individual devices to an existing bundle, or build your own system by selecting the desired
devices.
Panasonic Home Network System device lineup
The maximum number of devices for each device type are listed below.
Note:
R Availability and release dates of devices and bundles may vary by region.
R Device appearance may vary by region.
Hub
KX-HNB600
Indoor Camera
KX-HNC200
KX-HNC210
Outdoor Camera
KX-HNC600
1
4
10
Welcome to the Panasonic Home Network System!
Window/Door Sensor
KX-HNS101
Motion Sensor
KX-HNS102
Water Leak Sensor
KX-HNS103
Glass Break Sensor
KX-HNS104
Indoor Siren
KX-HNS105
Garage Door Sensor
KX-HNS107
Smart Plug
KX-HNA101
Access Keypad
KX-HNK101
Keychain Remote
KX-HNK102
Backup Battery
KX-HNP100
Digital Cordless Handset
KX-HNH100
50
6
11
Welcome to the Panasonic Home Network System!
Third-party device integration
Compatible Honeywell thermostats
Current list as of March, 2016.
– RTH9590WF
– RTH9580WF
– RTH8580WF
– RTH6580WF
– Wi-Fi 9000
– VisionPRO Wi-Fi
– FocusPRO Wi-Fi
12
Hub (KX-HNB600)
Welcome to the Panasonic Home Network System!
R Joins all system devices together
R Connects to your landline for making and receiving calls
R Supports SD card connection for recording camera video and audio
13
Welcome to the Panasonic Home Network System!
Indoor Camera (KX-HNC200, KX-HNC210)
R Full-color camera with night vision and built-in microphone for live monitoring and recording
R Built-in motion sensor (visual detection), sound sensor, and temperature sensor can be used to trigger
other actions (camera recording, turning on a light, etc.)
R Built-in microphone and speaker for two-way communication
14
Welcome to the Panasonic Home Network System!
Outdoor Camera (KX-HNC600)
R Full-color camera with night vision and built-in microphone for live monitoring and recording
R Built-in motion detection features (image sensor and infrared sensor) can be used to trigger other
actions (camera recording, turning on a light, etc.)
R Built-in microphone and speaker for two-way communication
R Splash-proof design for outdoor installation
15
Welcome to the Panasonic Home Network System!
Window/Door Sensor (KX-HNS101)
R Detects when the corresponding window or door is opened
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
16
Welcome to the Panasonic Home Network System!
Motion Sensor (KX-HNS102)
R Uses an infrared sensor (i.e., heat sensor) to detect motion in the surrounding area
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
17
Welcome to the Panasonic Home Network System!
Water Leak Sensor (KX-HNS103)
R Uses a small probe that can detect water
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
18
Welcome to the Panasonic Home Network System!
Glass Break Sensor (KX-HNS104)
R Uses a microphone that can detect the unique sound frequencies that are produced when glass breaks
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
19
Welcome to the Panasonic Home Network System!
Indoor Siren (KX-HNS105)
R Uses a loudspeaker and strobe light to alert you when the alarm system is triggered
R You can enable and disable the loudspeaker and strobe light for each siren
20
Welcome to the Panasonic Home Network System!
Garage Door Sensor (KX-HNS107)
R Detects when the garage door has been opened and closed
R Allows the system to notify you when the garage door is opened, and when it has been left open
R Can be used to trigger other actions (camera recording, turning on a light, etc.)
21
Welcome to the Panasonic Home Network System!
Smart Plug (KX-HNA101)
R Can be turned on and off using the app, when a sensor is triggered, or according to a schedule
R Built-in overcurrent and overwattage detection for added peace of mind
R Power consumption is logged for your reference
22
Welcome to the Panasonic Home Network System!
Access Keypad (KX-HNK101)
R Allows you to quickly confirm and change the system’s arm mode
R Can be wall mounted inside your home near the entrances and exits for easy access
23
Welcome to the Panasonic Home Network System!
Keychain Remote (KX-HNK102)
R Allows you to quickly change the system’s arm mode when you come home or are going out
R Can be used to trigger a pre-programmed operation, such as turning on a smart plug or sounding an
alert
R Can be attached to a set of keys for added convenience
24
Welcome to the Panasonic Home Network System!
Backup Battery (KX-HNP100)
R Supplies power to your hub or other devices in the event of a power outage
R Can be used to trigger the hub to call a pre-programmed phone number in the event of a power outage
25
Welcome to the Panasonic Home Network System!
Digital Cordless Handset (KX-HNH100)
R Makes and receives calls using your landline
R Can be used to change the system’s arm mode
R Displays system status
26
Welcome to the Panasonic Home Network System!
Thermostat integration
R Wi-Fi compatible Honeywell thermostats can be registered to the system
R Use your smartphone or tablet to control the thermostat manually
R Configure the system to change thermostat settings automatically according to the alarm system’s arm
mode
R For a list of compatible thermostats, see “Compatible Honeywell thermostats”, Page 12.
27
System setup
There are 4 basic steps you need to perform in order to access the system from your mobile device.
Connections
¯
Download
¯
Initial setup
¯
Register devicesAdd more mobile devices (smartphones and tablets), cameras,
*1 Refer to the System Setup Guide included with your hub for more information.
Download information is available at the web page listed below.
– Hub (KX-HNB600)
– A wireless router
– A compatible mobile device
Compatible mobile devices
– iPhone 4 and later, iPad (iOS 6.0 and later)
– Android smartphones and tablets (Android 4.0 and later)
– Minimum recommended screen size: 1280´720 (screen content may not be displayed properly on
devices with smaller screens)
Note:
R The [Home Network] app may not function properly depending on the system environment, such as
the model of your mobile device, the peripherals connected to your mobile device, and the apps
installed on your mobile device.
R The following Android devices are not compatible with the [Home Network] app.
– Android devices that are not supported by Google Play
– Android devices with limited hardware features
(Bluetooth, Wi-Fi, and microphone support are required.)
Connect your hub to a power outlet and to your telephone line.
Download the [Home Network] app to your mobile device.
Use the [Home Network] app to configure the hub to connect to your
wireless router, and then register your mobile device to the hub.
sensors, and other devices to the system.
*1
In order to use your mobile device to access the system, you must first configure the hub to access your
wireless router.
Note:
R If your hub is already configured to access your wireless router, you do not need to perform this
procedure again.
R If you have completed this procedure and want to register another mobile device to the hub, see
“Registering other mobile devices to the hub”, Page 31.
R If you experience trouble while performing this procedure, refer to the information in “Sometimes I
cannot access the system while at home”, Page 122.
28
System setup
Before you begin
In this procedure, the hub will enter “temporary access point mode”. In this mode, you can connect your
mobile device directly to the hub using Wi-Fi®, and then use your mobile device to change the hub’s
Wi-Fi settings so that the hub can connect to your wireless router.
Confirm the following before you begin.
– Make sure you have installed the [Home Network] app on your mobile device
– Make sure your wireless router and the hub are turned on and the hub’s LED indicator is lit in yellow
– Make sure the hub is located within range of your wireless router
– Make sure your mobile device is connected to your wireless router
– Make sure your mobile device can connect to the Internet
– Make sure you know the network name (SSID) and password assigned to your wireless router
Note:
R The hub only supports the 2.4 GHz wireless band. Before performing the initial setup, make sure your
mobile device is connected to the wireless router using the SSID that is assigned to the 2.4 GHz band
of your wireless router. When prompted to enter your wireless router’s password, enter the password
that is assigned to the 2.4 GHz band.
Initial setup for iPhone, iPad
1 Start the [Home Network] app by tapping its icon (shown below).
R The end-user license agreement is displayed the first time you start the app.
R If your device is not compatible with the app, a message about incompatibility will be displayed
when you start the app.
2 Tap [Set up the Hub].
R A description of the initial setup procedure is displayed.
3 When prompted, press the Wi-Fi SETUP button on the hub.
R The hub’s LED indicator blinks in yellow.
4 Change your mobile device’s Wi-Fi setting temporarily so that it connects to the hub directly.
R Open your mobile device’s [Settings] app, tap [Wi-Fi], select “KX-HNB600_Panasonic”, enter
“00000000” as the password, and then tap [Join].
R If more than one item named “KX-HNB600_Panasonic” is displayed, wait approximately
10 minutes and perform this procedure from the beginning.
5 Start the [Home Network] app again.
6 If necessary, enter the password required to connect to your wireless router and then tap [Next].
R The hub and your mobile device connect to your wireless router.
R If prompted, follow the on-screen instructions and connect your mobile device to your wireless
router, start the app again, and then tap [Add This Mobile Device].
R If you enter the wrong password, [Setup failed.] is displayed and the hub’s LED indicator lights.
Proceed as follows according to the color of the hub’s LED indicator.
– If the LED indicator is lit in yellow, repeat the initial setup procedure from the beginning.
– If the LED indicator is blinking quickly in green, you must reset the hub’s Wi-Fi settings. See “If
the hub’s LED indicator blinks quickly in green”, Page 30.
R The hub’s MAC address is displayed on this screen. If your wireless router uses MAC address
filtering for extra security, make a note of the hub’s MAC address and add it to your wireless
router’s list of MAC address that are allowed to access the router.
7 When prompted, press the Wi-Fi SETUP button on the hub.
R Your mobile device will be registered to the hub.
29
System setup
8 When prompted, set the password used to log in to the hub while away from home and then tap [OK].
9 When prompted, enter a name for the hub and for your mobile device and then tap [OK].
R The hub name setting is used by your mobile device to identify the hub. This is useful when you
have multiple hubs.
R The mobile device name setting is used by the hub and other system users to identify your mobile
device. This is useful when performing certain operations, such as deregistering or making
intercom calls using a cordless handset.
10 When prompted, select whether you want to customize device profiles, i.e., the device name,
location, and other settings for your devices.
R If you choose not to customize the device profiles now, you can change them later if desired (see
“Device profiles (device settings)”, Page 103).
R If you choose to customize the device profiles now, change each setting as desired. When
finished, tap repeatedly until the “completed” message is displayed.
R The app’s home screen is displayed when initial setup is complete.
If the hub’s LED indicator blinks quickly in green
If you enter the wrong Wi-Fi password during the initial setup procedure for iPhone or iPad, [Setup
failed.] is displayed and the hub’s LED indicator blinks quickly in green. In this case, perform the
following.
1 Press and hold the 3 registration buttons on the side of the hub and the Wi-Fi SETUP button on the
back of the hub at the same time (4 buttons total) until the hub’s LED indicator blinks slowly in green
and yellow.
2 Wait for the hub’s LED indicator to light in yellow.
3 Repeat the initial setup procedure ( “Initial setup for iPhone, iPad”, Page 29).
Initial setup for Android devices
1 Start the [Home Network] app by tapping its icon (shown below).
R The end-user license agreement is displayed the first time you start the app.
2 Tap [Set up the Hub].
3 When prompted, press the Wi-Fi SETUP button on the hub.
R The hub’s LED indicator blinks in yellow.
R The app temporarily changes your mobile device’s Wi-Fi setting so that it connects to the hub
directly.
4 If necessary, enter the password required to connect to your wireless router and then tap [Next].
R The hub and your mobile device connect to your wireless router.
R The hub’s MAC address is displayed on this screen. If your wireless router uses MAC address
filtering for extra security, make a note of the hub’s MAC address and add it to your wireless
router’s list of MAC address that are allowed to access the router.
5 When prompted, press the Wi-Fi SETUP button on the hub.
R Your mobile device will be registered to the hub.
6 When prompted, set the password used to log in to the hub while away from home and then tap [OK].
7 When prompted, enter a name for the hub and for your mobile device and then tap [OK].
R The hub name setting is used by your mobile device to identify the hub. This is useful when you
have multiple hubs.
30
Loading...
+ 102 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.