Panasonic KX-HNC600 User Manual
Installation Guide
Home Network System
Outdoor Camera
Model No. KX-HNC600
Thank you for purchasing a Panasonic product.
This document explains how to install the outdoor camera properly.
For details about how to use the system, refer to the User’s Guide (page 26).
Please read this document before using the unit and save it for future reference.
For assistance, visit our Web site: www.panasonic.com/support
for customers in the U.S.A. or Puerto Rico.
Please register your product: www.panasonic.com/prodreg
Printed in China
Table of Contents
Introduction
Accessory information ..................................3
Important Information
About this system .........................................4
For your safety .............................................4
Important safety instructions ........................5
For best performance ...................................5
Privacy and rights of portrait ........................6
Other information .........................................6
Installation Location
Wireless communication range ....................8
Information about sensor features ...............8
Installation location examples ....................11
Do not install in these locations ..................13
Setup
Part names and functions ..........................15
LED indicator ..............................................15
Setup overview ...........................................15
Registering the camera ..............................16
Confirming the registration area .................16
Installation ..................................................17
Appendix
Testing the motion detection range ............22
Adjusting the infrared sensor range ...........22
Features available when using the [Home
Network] app ..............................................26
Accessing the User’s Guide .......................26
Specifications .............................................27
FCC and other information .........................28
Customer services .....................................29
Warranty (For United States and Puerto
Rico) ...........................................................30
2
Introduction
Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A AC adaptor/PNLV2360Z 1
B Camera mounting stand/PNZB1002Z 1
C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW 4
D Suspension wire tool
– Safety wire: 1
PQME10080Z
– Washers: 2
Small washer for attaching safety wire to camera
ø12 mm (15/32 inches)/XWG26D12VW
Large washer for attaching safety wire to wall
ø16 mm (5/8 inches)/XWG4F16VW
– Screws: 2
Small screw for attaching safety wire to camera
10 mm (3/8 inches)/XTB26+10GVW
Large screw for attaching safety wire to wall
25 mm (1 inch)/XTB4+25AVW
E Sensor range cap/PNHG1210Z 1
A B C D E
1
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Trademarks
R microSDHC is a trademark of SD-3C, LLC.
R iPhone and iPad are registered trademarks of Apple Inc.
R Android is a trademark of Google Inc.
R All other trademarks identified herein are the property of their respective owners.
Notice
R The hub supports microSD and microSDHC memory cards. In this document, the term
“microSD card” is used as a generic term for any of the supported cards.
For assistance, please visit www.panasonic.com/support
3
Important Information
About this system
This system is an auxiliary system; it is not
designed to provide complete protection from
property loss. Panasonic will not be held
responsible in the event that property loss
occurs while this system is in operation.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact us
at www.panasonic.com/contactinfo
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open. Danger of electric shock
exists.
R Never touch the plug with wet hands.
Danger of electric shock exists.
R Do not connect non-specified devices.
R When opening holes in walls for installation
or wiring, or when securing the power cord,
4
For assistance, please visit www.panasonic.com/support
make sure you do not damage existing
wiring and ductwork.
R Do not leave the power cable exposed
outdoors.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the power cord to be
excessively pulled, bent or placed under
heavy objects.
R Do not mount the bracket in an unstable
location, in a location subject to frequent
vibration, on a ceiling, or on a weak wall.
(Do not mount on gypsum board, concrete
blocks, wooden materials exposed to the
outdoors, walls with very rough surfaces, or
surfaces that are narrower than the width of
the wall mount bracket.) There is a risk of
injury if the product falls, or of fire or electric
shock if water enters the product.
R Keep small parts (microSD cards, screws,
washers, sensor range caps, etc.) out of
the reach of children. There is a risk of
swallowing. In the event they are
swallowed, seek medical advice
immediately.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Keep the sensor range caps out of the
reach of children. There is a risk of
swallowing. In the event they are
swallowed, seek medical advice
immediately.
R Never put metal objects inside the product.
If metal objects enter the product, turn off
the circuit breaker and contact an
authorized service center.
Important Information
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. DECT features
operate between 1.92 GHz and 1.93 GHz
with a peak transmission power of 115 mW.
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install wiring during a lightning storm.
R Although this product conforms to the IPX5*
code, do not intentionally expose it to water.
*IPX5 indicates that the product is
protected against water jets: water
projected at all angles through a 6.3 mm
nozzle flow rate of 12.5 liters/minute at a
pressure of 30 kN/m2 for 3 minutes from a
distance of 3 meters.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
R If the wiring is underground, do not make
any connections underground.
R If the wiring is underground, make sure the
power cable and other wiring is properly
waterproofed by running the cables through
a conduit.
Preventing accidents and injuries
R The safety wire must be used when
mounting the product. There is a risk of
injury if the product falls.
R Do not put your ear(s) near the speaker, as
loud sounds emitted from the speaker may
cause hearing impairment.
R Do not look directly at the LED lights when
they are lit. Failure to do so may cause
damage to eyes.
For assistance, please visit www.panasonic.com/support
Important safety instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Use only the power cord indicated in this
document.
SAVE THESE INSTRUCTIONS
For best performance
Hub location/avoiding noise
The hub and other compatible Panasonic
devices use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your hub:
– at a convenient, high, and central
location with no obstructions between
the product and hub in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the hub on a bay window or near
a window.)
R If the reception for a hub location is not
satisfactory, move the hub to another
location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
5
Important Information
R Do not expose this product to direct
sunlight or other forms of powerful light
such as halogen lights for long periods of
time. (This may damage the image sensor.)
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than -20 °C (-4 °F)
or greater than 50 °C (122 °F). Damp
basements should also be avoided.
R Do not allow the lens cover or the infrared
sensor to become scratched or dirty. (This
may cause image quality to be reduced,
incorrect detections, malfunctions, or
damage to the lens cover and infrared
sensor.)
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Privacy and rights of portrait
When installing or using the camera, please
take into consideration the rights of others with
regard to privacy.
It is generally said that “privacy” means the
ability of an individual or group to stop
information about themselves from becoming
known to people other than those whom they
choose to give the information. “Rights of
portrait” means the right to be safe from
having your own image taken and used
indiscriminately without consent.
R Do not use benzine, thinner, or any
abrasive powder.
R Do not apply running water to the product.
Camera image quality
R Camera images may have the following
characteristics.
– Colors in images may differ from the
actual colors.
– When there is light behind the subject
(i.e., backlighting), faces may appear
dark.
– Image quality may be reduced in dark
locations.
– Images may appear hazy when there
are outdoor lights in use.
Protecting your recordings
R Do not remove the microSD card or
disconnect the hub’s AC adaptor while
reading or writing data to the microSD card.
Data on the card could become corrupted.
R If a microSD card malfunctions or is
exposed to electromagnetic waves or static
electricity, data on the card could become
corrupted or erased. Therefore we
recommend backing up important data to a
computer or other device.
Other information
Routine care
R To prevent incorrect detections, unplug the
product before performing routine care.
R Wipe the outer surface of the product with a
soft moist cloth.
6
For assistance, please visit www.panasonic.com/support
Notice
Important Information
For assistance, please visit www.panasonic.com/support
7
Installation Location
Wireless communication range
The wireless communication range of each device in the system from the hub is approximately
50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication
may be unreliable when the following obstacles are located between the hub and other devices.
R Metal doors or screens
R Walls containing aluminum-sheet insulation
R Walls made of concrete or corrugated iron
R Double-pane glass windows
R Multiple walls
R When using each device on separate floors or in different buildings
Note:
R The camera’s LED indicator blinks quickly in red if it is out of range of the hub. In this case,
confirm all connections, including those of the hub.
Information about sensor features
The camera has 2 sensor features that are used for motion detection: a visual sensor and an
infrared sensor (i.e., heat sensor).
Please read the following information before deciding where to install the camera.
Note:
R The camera’s sensor features are not designed to be used in situations that require high
reliability. We do not recommend use of the sensor features in these situations.
R Panasonic takes no responsibility for any injury or damage caused by the use of the camera’s
sensor features.
Detection method
Visual sensor Infrared sensor
The camera detects changes in the images
being displayed.
R The camera detects changes in the
brightness levels of moving objects.
The camera detects temperature differences
of objects in the images being displayed.
R The infrared sensor uses infrared rays to
detect temperature differences within its
range that are emitted naturally by people,
animals, etc.
8
For assistance, please visit www.panasonic.com/support
Detection range
Visual sensor Infrared sensor
Can detect motion anywhere in the visible
image.
Can detect motion only in part of the visible
image (shown here in gray)
Installation Location
R You can adjust the area detectable by the
visual sensor. For more information, refer
to the User’s Guide (page 26).
R You can adjust the area detectable by the
infrared sensor. See “Adjusting the infrared
sensor range”, page 22.
R Detection does not occur when there are
obstacles in front of the infrared sensor.
Remove the obstacles or change the
installation location.
Main characteristics
Visual sensor Infrared sensor
Easily detects movement in the daytime or
when it is bright.
R Movement may be incorrectly detected
when the moving object and the
background have a similar color.
R Movement may be incorrectly detected
when there are sudden changes to the
overall brightness levels such as when
external lights are used.
Easily detects when there is a big difference
between the temperatures of objects and the
surrounding environment, such as in winter or
late at night.
R The sensor cannot easily detect when
there is no difference between the
temperatures of objects and the
surrounding environment, such as in
summer or during the daytime.
R If the camera is mounted facing a road, the
sensor may detect incorrectly due to
interference caused by the heat from
passing cars.
For assistance, please visit www.panasonic.com/support
9
A
B
C
D
Installation Location
Direction of motion
It is easier to detect objects that move sideways in front of the camera, and more difficult to
detect objects that move directly toward the front of the camera.
A It is difficult to detect movement directly towards the front of the camera.
B It is easy to detect movement sideways in front of the camera.
C Detection range
D Camera
10
For assistance, please visit www.panasonic.com/support
Loading...