How it Works
Panasonic
Loading...
K-EW114L03AE
Operation Manual
70 pgs17 Mb0

Panasonic K-EF134L02E, K-EW114L03E, K-EW114L06E, K-EF134L03E, K-EF134L06E Operation Manual

...
Network Camera Web3.0 Operation Manual
Model No. K-EW114L01E
K-EW114L03E
K-EW114L06E
K-EW114L08E
K-EF134L03E
K-EF134L06E
Version 1.0.2
Table of Contents
1 Network Connection ...................................................................................................... 1
2 Main Interface Introduction ............................................................................................ 2
2.1 Log in..................................................................................................................... 2
2.2 Live Interface ......................................................................................................... 8
2.3 Encode Setup ........................................................................................................ 9
2.4 System Menu ...................................................................................................... 11
2.5 Video Window Function Option ........................................................................... 12
2.5.1 Zoom and Focus (K-EW114L01E, K-EF134L01E) .................................. 12
3 Setup ........................................................................................................................... 14
3.1 Basic ................................................................................................................... 14
3.2 Image .................................................................................................................. 16
JPEG/H.264 .............................................................................................. 16 3.2.1
Image adjust ............................................................................................. 24 3.2.2
Profile Management .................................................................................. 28 3.2.3
Zoom and Focus ....................................................................................... 28 3.2.4
3.3 Network ............................................................................................................... 30
TCP/IP ...................................................................................................... 30 3.3.1
Connection ............................................................................................... 33 3.3.2
PPPoE ...................................................................................................... 34 3.3.3
DDNS ....................................................................................................... 35 3.3.4
IP filter ...................................................................................................... 36 3.3.5
SMTP (Email) ........................................................................................... 37 3.3.6
UPnP ........................................................................................................ 39 3.3.7
SNMP ....................................................................................................... 40 3.3.8
Bonjour ..................................................................................................... 42 3.3.9
Multicast ................................................................................................... 43 3.3.10
IEEE802 ................................................................................................... 44 3.3.11
QoS .......................................................................................................... 45 3.3.12
3.4 Event ................................................................................................................... 46
Video Detect ............................................................................................. 46 3.4.1
Abnormity ................................................................................................. 51 3.4.2
3.5 Storage ................................................................................................................ 52
Record Schedule and Snapshot Schedule ............................................... 52 3.5.1
Destination ................................................................................................ 53 3.5.2
Record Control ......................................................................................... 55 3.5.3
3.6 System ................................................................................................................ 56
Account (User mng.) ................................................................................. 56 3.6.1
i
Default reset ............................................................................................. 61 3.6.2
Import/Export ............................................................................................ 61 3.6.3
Auto Maintenance ..................................................................................... 62 3.6.4
Upgrade .................................................................................................... 62 3.6.5
3.7 Information .......................................................................................................... 63
Version ..................................................................................................... 63 3.7.1
Log ............................................................................................................ 63 3.7.2
Online User ............................................................................................... 65 3.7.3
4 Alarm ........................................................................................................................... 66
5 Log out ........................................................................................................................ 67
Important The following functions are for reference only. Some series products may not support all the functions listed below.
ii
1 Network Connection
These series network camera products support the Web access and management via PC.
Web includes several modules: monitor channel preview, system configuration, alarm and etc.
Please follow the steps listed below for network connection.
Make sure the network camera has connected to the network properly.
Network camera IP address and PC IP address shall be in the same network segment. If there is
router, please set the corresponding gateway and subnet mask.
Use order ping ***.***.***.***(* network camera address) to check connection is OK or not.
1
2 Main Interface Introduction
2.1 Log in
Open IE and input network camera address in the address bar.
For example, if your camera IP is 192.168.0.10, then please input http:// 192.168.0.10 in IE address bar.
See Figure 2-1.
Figure 2-1
The login interface is shown as below. See Figure 2-2.
Please input your user name and password.
Default ID is admin and PWD is 12345 (if connects with ONVIF protocol, Default ID:admin and
PWD:admin).
Note: For security reasons, please modify your password after you first login.
Input your IP
address here
2
Figure 2-2
If it is your first time to login in, you may see the interface shown as in Figure 2-3.
3
Figure 2-3
Click on “Please click here to download and install the plug-in”. The system pops up warning information
to ask you whether run or save this plug-in. See Figure 2-4.
4
Figure 2-4
You must either run or save the file to local and install it. Follow the following steps. See Figure 2-5 and
Figure 2-6.
Note:
The displayed screens are different by the security settings on the PC.
5
Figure 2-5
6
Figure 2-6
When plug-in installation completes, the installation page closes automatically. The web-end will
refresh automatically, and then you can view video captured by the camera.
7
2.2 Live Interface
After you logged in, you can see the live monitor window. See Figure 2-7.
Figure 2-7
There are three sections:
Section 1: Encode setup bar
Section 2: System menu
Section 3: Window function option bar
2
1
3
8
2.3 Encode Setup
The encode setup interface is shown as in Figure 2-8.
Figure 2-8
Please refer to the following sheet for detailed information.
SN Parameter Function
1 Compression
The compression under distribution is displayed by Stream change.
2 Stream
You can switch Stream(1) and (2)
3 Protocol
You can select stream media protocol from the dropdown list. There are three options: TCP/UDP/Multicast
4 Digital Zoom
When the video is in the original status, click it you can
select any zone to zoom in. In the non-original status, you can drag the zoom-in zone in specified range. Right click mouse to restore previous status.
Click it; you can use the middle button of the mouse to
zoom in/out the video size.
5 Image Adjustment
You can adjust image quality.
6 Alarm
It moves to an alarm setting screen.
7 Logout
Click Logout button, system goes back to log in interface.
1
7 2 3
4
5
6
9
Image Adjustment 2.3.1
Click Image Adjustment button to open picture setup interface. See Figure 2-9. This interface is
displayed under a display of Image Adjustment.
Figure 2-9
Please refer to the following sheet for detailed information.
Parameter Function
Video setup
It is to adjust monitor video brightness.
Note: All the operations here apply
to WEB end only.
Please go to Setup -> Image
-> Image adjust to adjust corresponding items.
It is to adjust monitor video contrast.
It is to adjust monitor video hue.
It is to adjust monitor video saturation.
Reset
Restore brightness, contrast saturation and hue to system default setup.
10
2.4 System Menu
System menu is click Setup as in Figure 2-10.
.
Please refer to chapter 3.1 Basic, chapter 3.2 Image, chapter 3.3 Network, chapter 3.4 Event, chapter
3.5 Storage, chapter 3.6 System, and chapter 3.7 Information for detailed information.
Figure 2-10
11
2.5 Video Window Function Option
The interface is shown as below. See Figure 2-11.
Figure 2-91
Please refer to the following sheet for detailed information.
SN Parameter Function
1
Zoom and
Focus
Click this button and the zoom and focus interface appears on
encode setup bar, as shown in figure 2-12.
2
Original
Size
Click this button to go to original size. It is to display the actual
size of the video stream. It depends on the resolution of the
bit stream.
3
Full Screen
Click it to go to full-screen mode. Double click the mouse or click the Esc button to exit the full screen.
4
Width and
Height ratio
Click it to restore original ratio or suitable window.
5
Fluency
Adjustment
There are three levels of fluency for you to select. The default
is real-time with minimum delay. You may select fluent mode
in case connection is slow.
6
Snapshot
You can snapshot important video by clicking on this button.
All images are memorized in system folder: \ picture download (default). You can go to Setup -> Image -> JPEG/H.264 -> Path to
modify the local record save path.
7
Triple Snapshot
Click it, system can snap at 1 fps. All images are memorized in system storage folder.
8
Record
For manual record. All records are memorized in Setup -> Image -> JPEG/H.264 -> Path.
Zoom and Focus (K-EW114L01E, K-EF134L01E) 2.5.1
Click this button and the zoom and focus interface appears on the encode setup bar, as shown in
figure 2-12, please refer to the following sheet for detail infomations to adjust zoom and focus
configuration.
Note:
Auto-focus after zoom focus adjustment.
Disable the operation till finishing zoom and focus adjustment.
1 2 3 4 5 6 7 8
12
Figure 2- 12
Parameter Function
Zoom
Adjust the focal length of the lens by clicking or long pressing “+”“-”buttons or moving the slider. Step length(Speed) is used to adjust the length of one step with one click.
Focus
Adjust the sharpness length of the lens by clicking or long pressing “+”、
“-” buttons
or
moving the slider. Step length(Speed) is used to adjust the length of one step with one click.
Auto Focus
Click to adjust the image definition automatically.
Note:
Other lens operations are not allowed during the process of auto-focus.
Restore All
Reset the lens to zero position to eliminate the accumulative error of lens.
Note:
Please reset when the image adjustment is not clear or operating zoom focus many
times.
Refresh
Synchronize the location of drag slider of lens and zoom focus after hardware zoom
focusing.
13
3 Setup
3.1 Basic
The basic interface includes the local host setup and the date/time setup.
The date and time interface is shown as in Figure 3-1.
Figure 3-1
Please refer to the following sheet for detailed information.
Parameter Function
Camera title
It is to set device name.
Date/time
Set date and time. Click “Sync PC” to set PC time to camera.
Time display format
There are two options: 24-H and 12-H.
Date/Time display format
Here you can select date format from the dropdown list.
14
Summer time(daylight saving)
Here you can set daylight saving time begin time and end time. You can set according to the date format or according to the week format.
Time zone
The time zone of the device.
Camera title/Time on screen
Link Video Overlay ( Image->JPEG/H.264->Overlay)
Language
You can select the language from the dropdown list.
Video Standard
This is to display video standard such as NTSC/PAL.
NTP Setup You can check the box to enable NTP function.
NTP Server You can set the time server address.
NTP Port It is to set the time server port.
Update period
It is to set the sync periods between the device and the time server.
15
3.2 Image
JPEG/H.264 3.2.1
JPEG/H.264 3.2.1.1
The video bit stream interface is shown as below. See Figure 3-2.
Figure 3-2
Please refer to the following sheet for detailed information.
Parameter Function
Stream(1)
Code-Stream Type
It includes general stream, motion stream and alarm
stream. You can select different encode frame rates form different recorded events.
System supports active control frame function (ACF). It allows you to record in different frame rates.
For example, you can use high frame rate to record important events, record scheduled event in lower frame rate and it allows you to set different frame
rates for VMD record and alarm record.
16
Parameter Function
Compression
There are three options: H.264 (main profile
standard), H.264H (high profile standard), H.264B (baseline standard) encode and MJPEG encode.
H.264 ：Main Profile encode mode.  H.264H : High Profile encode mode.  H.264B ：Baseline Profile encode mode  MJPEG ：
In this encode mode, the video needs larger bit stream to guarantee the video definition. You can use the max bit stream value in the recommend bit to get the better video
output effect.
Image capture size
There are multiple resolutions. You can select from the dropdown list.
For each resolution, the recommended bit stream value is different.
Important
You cannot set a resolution higher than 720P (not including 720P) when the flip function is in process.
Frame rate(FPS)
1～30fps
The frame rate may vary due to different resolutions.
Transmission Priority
There are two options: VBR and CBR.
Please note, you can set video quality in VBR mode.
Reference Bit Rate
Reference bit rate value according to the resolution and frame rate you have set.
Bit Rate
In VBR, the bit rate here is the max value. In
CBR, it is a fixed value.
See reference bit stream for recommended
value.
Refresh interval
Here you can set the P frame amount between two I frames. The value ranges from 1 to 150. Default value is 50.
Recommended value is frame rate.
Watermark Settings / Watermark Character
This function allows you to verify the video is
tampered or not. Here you can select watermark bit stream, watermark mode and watermark character. Default character is DigitalCCTV. The max length is 85-digit. The character can only include number, character
and underline.
Stream(2) Enable
Please check the box here to enable extra stream
function.
This function is enabled by default.
17
Parameter Function
Code-Stream Type
General bit stream.
Compression
There are three options: H.264 (main profile
standard, H.264H (high profile standard), H.264B (baseline standard) encode and MJPEG encode. The H.264, H.264H and H.264B both are H264
bit stream. H.264 is the Main Profile encode and the H.264B is the Baseline Profile encode mode. H.264B is for Blackberry cell phone to realize the monitor. You need to enable the sub stream function in your camera and set the resolution as CIF. Then you can monitor via the Blackberry cell phone.
MJPEG: In this encode mode, the video needs
to large bit stream to guarantee the video definition. You can use the max bit stream value in the recommend bit to get the better video
output effect.
Image capture size
There are multiple resolutions. You can select from the dropdown list.
For each resolution, the recommended bit stream value is different.
Frame rate(FPS)
NTSC: 1-30fps. PAL: 1-25fps
The frame rate may vary due to different resolutions.
Transmission Priority
There are two options: VBR and CBR. Please note, you can set video quality in VBR mode.
Reference Bit Rate
Reference bit rate value according to the resolution and frame rate you have set.
Bit Rate
In CBR, the bit rate here is the max value. In
dynamic video, system needs to low frame rate or video quality to guarantee the value.
The value is null in VBR mode.
Please refer to recommend bit rate for the
detailed information.
Refresh interval
Here you can set the P frame amount between two I frames. The value ranges from 1 to 150. Default value is 50.
Recommended value is frame rate.
18
Loading...
+ 49 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use