Panasonic F-PXL45A Operating Instructions Manual
OPERATING INSTRUCTIONS
Air Purifier
Model No.
F-PXL45A
This product is for indoor use only
CONTENTS
SAFETY PRECAUTIONS
SETTING AND OPERATING REQUIREMENTS
ACCESSORIES
MAIN PARTS IDENTIFICATION
SETUP
OPERATION
POWER OFF/ON CONTROL
AIR VOLUME SELECTION·TIMER OPERATION·CHILD LOCK
ECONAVI
REMOTE CONTROL
CARE AND MAINTENANCE
CLEANING METHOD
3~5
5~6
8~9
10~13
10
11
12
12~13
14~15
14~15
CONFIRMATION
AND SETUP
6
7
OPERATION CARE AND
MAINTENANCE
FILTER REPLACEMENT
WHEN IDLE FOR A LONG TIME
FURTHER INFORMATION
FAQS
TROUBLESHOOTING
SPECIFICATIONS/
OPTIONAL ACCESSORIES
Thank you very much for purchasing this Panasonic product.
Please read these operating instructions carefully before operating or servicing the product.
Failure to comply with instructions could result in injury or property damage.
Keep the operating instructions in a safe place for future reference.
BACK COVER
15
15
16~17
18
19
OTHER
INFORMATION
”Multipurpose air purifier for wall-use, table-use,
floor-use”can filter small particles efficiently by
“HEPA composite filter”.
HEPA composite filter can filter small particles efficiently.
Product can be installed on the wall, used on table or on floor.
With
nanoe
Product operates in power saving mode by ECONAVI.
TM
technology, product can purify air more thoroughly.
With “nanoeTM” technology
TM
nanoe
technology.
With nanoe
inhibition 2, fungi elimination 3 and deodorization 4 can be achieved,
thereby creates a conducive environment for hydrated skin..
< airborne fungi > The result is of a 4-hour test in a closed space of 25m3, instead of in actual
application space.
< adhered bacteria > The result is of a 8-hour test in a closed space of 23m
application space.
1
< airborne fungi >
Test organization: Kitasato Research Center
of Environmental Sciences
Test method: directly expose and measure the
bacteria count collected in a test space of 25m
Sterilization method: release nanoe
Target: airborne fungi
Test outcome: inhibited 99% and above in 4
hours（Test number 24_0301_1）
2
Test organization: Panasonic Corporation Analysis Center
Test method: measure the allergens adhered on the fabric in a test space of 23m3 with ELISA method
Inhibiting method: release nanoe
Target: pollen allergens
Test outcome: inhibited 88% and above in 8 hours [BAA33-130402-F01]
3
Test organization: Japan Food Research Laboratories
Test method: measure the fungi count adhered on the fabric in a test space of 23m
Sterilization method: release nanoe
Target: adhered fungi
Test outcome: to confirm the effect after 8 hours [Test number 13044083002-01]
4
Test organization: Panasonic Corporation Analysis Center
Test method: conduct verification by using 6-phase odor intensity in a test space of 23m
Deodorizing method: release nanoe
Target: adhered cigarette odor
Test outcome: odor intensity drops to 1.2 after 2 hours [BAA33-130125-D01]
is a microparticle ion wrapped in water by the latest
TM
technology, the effect of sterilization
1
, allergens
< adhered bacteria >
Test organization: Japan Food Research
Laboratories
Test method: measure the bacteria count
3
TM
adhered on the fabric in a test space of 23m
Sterilization method: release nanoe
Target: bacteria adhered on the standard fabric
Test outcome: eliminated 99% and above in 8
hours [Test number 13044083003-01]
With a variety of bacterica to test
TM
TM
TM
3
, instead of in actual
TM
3
3
3
This is nanoe
The deodorizer effect differs according to the surrounding environment (temperature, humidity),
operation time, type of odor or fiber.
This product is not a medical equipment.
Note:nanoe
2
TM
device verification result, it is different from the verification of this product.
TM
and the nanoeTM mark are trademarks of Panasonic Corporation.
With function of “detecting, indicating and removing PM2.5”
The product can detect PM2.5 (0.3~2.5µm particles) in air by dirty sensor and remove them by
HEPA composite filter. The PM2.5 pollution indicator will be red when the pollution is serious.
With “ECONAVI” mode
Automatically stops operating when detects the air is clean, meanwhile operates in advance to
eliminate the dirt effectively before spreading, thus reducing the operation time and saving power.
Wall installation
The product can be installed on the wall.
You should contact the dealer for wall
installation if necessary.
Do not install the product by yourself.
(Otherwise, the product may fall off due to
inappropriate installation, and cause injury.)
WARNING
SAFETY PRECAUTIONS
The safety precautions in this instruction should be strictly followed in order to prevent injury or
damage to the users or properties.
The following symbols differentiate the levels of danger and injury that may result if the product is
not used correctly as instructed.
Please follow strictly
CAUTIONWARNING
Denotes a hazard that could result in serious
injury or death.
The following symbols are used to indicate the type of instructions that need to be followed.
(The symbols given below are examples)
This symbol indicates an action that must
not be performed.
Denotes a hazard that could result in minor
injury or damage to property.
This symbol indicates an action that must
be performed.
WARNING
Do not pull on the power cord
when carrying or storing the
product.
(Otherwise, the power cord may be
damaged with the possibility of fire or
electirc shocks.)
Do not damage the power cord
or power plug.
Do not cut, modify, twist, squeeze the
power cord, and do not place it near
heat sources, place heavy weight on it,
etc.
(Otherwise, the power cord may be
damaged with the possibility of fire or
electirc shocks.)
Do not break, modify or put
battery into fire or near heat.
If the insulation or exhaust valve is
(
damaged, the battery may become hot,
crack, and result in injury.)
Do not touch the power plug
with wet hands.
(Otherwise, electric shocks
may occur.)
Do not let the product get wet.
(Otherwise, the product may
short circuit with the possibility
of fire or electirc shocks.)
Do not use power other than
the rated voltage (back cover).
(Otherwise, the power cord may be
overheat and induce fire.)
Do not disassemble or modify
the product.
(Otherwise, the product may malfunction with the possibility of fire or
electric shocks.)
→
Contact the dealer for repair.
CONFIRMATION
AND SETUP
3
SAFETY PRECAUTIONS
WARNING
Please follow strictly
Do not place your fingers or
metal objects into the air inlet
or air outlet.
(Otherwise, you may be hurt by the
inner units with the possibility of
electric shocks or injury.)
Anyone with a medical pacemaker, please keep the
implantation site far away
from the remote control fixed
on the product.
Area of the
built-in magnet
(The pacemaker may be negatively
affected, because of the magnet used
to fix the remote control .)
Clean the power plug
regularly.
(If dust on the power plug，humidity
may cause damage to insulation and
fire may occur.)
Disconnect the power and wipe it with
a dry cloth.
When the product has not been used
for long period, disconnect the power.
Make sure to disconnect the
power before cleaning the
product.
(Otherwise, the product may to start
suddenly with the possibility of electric
shocks or injury.)
In case of any abnormality or
malfunction, stop using the
product immediately and
disconnect the power.
(Otherwise, electric shocks, fire or
smoke may occur.)
<Examples of abnormality/malfunction>
The product stops running when
moving the power cord.
If any switches do not work.
If the circuit breaker is tripped or a fuse
blows.
If the power cord or power plug
becomes abnormally hot.
If you notice a burning smell or an
abnormal sound or vibration.
If there is any other abnormalities or
malfunctions.
Please stop using the product immedi-
→
ately and disconnect the power, and
contact the dealer to check and repair.
Insert the power plug
completely.
(If the power plug is not inserted
securely, electirc shock or fire may
occur due to short circuit.)
Do not use damaged power plug or
loose power socket.
Keep the battery out of reach
of children and infants.
(
Otherwise, it may be swallowed. If
swallowed, seek medical help immediately.)
4
CAUTION
Keep the room well-ventilated
when using the product
together with a burner.
(Otherwise, carbon monoxide poisoning
may occur.)
This product cannot remove carbon
monoxide.
When disconnectging the
power, hold the power plug
instead
of the power cord.
(Otherwise, the power cord may
damage with the possibility of fire or
Make sure the power cord is
not clipped between the product and wall during wall installation.
(Otherwise, the power cord may
damage and fire or electric shocks may
occur.)
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
(Otherwise, fire or electric shocks may
occur.)
SAFETY PRECAUTIONS
Please follow strictly
CAUTION
Do not clean the product with
gasoline or other volatile mixture solvents, and avoid contacting with spray insecticides.
(Otherwise, the product may crack or
short circuit with the possibility of
injury, fire or electric shock.)
Do not operate this product in
places where indoor fumigation type insecticides are being
used.
(Chemical residue may build up inside
the product and discharge from the air
outlet, damaging health.)
Ventilate the room with fresh air thor-
→
oughly after using insecticides before
operating the product.
Do not sit on or lean against
this product.
(Otherwise, the product may fall over
and injury may occur.)
Families with children should pay more
attention.
Do not place the product near
combustible materials such as
lighted cigarette, incense etc.
(Otherwise, these may be absorbed
into the product with possibility of
fire.)
Do not place the product in
the following places.
Do not place in incline and unstable
place.
(Otherwise, the prouduct may fall over
and injury may occur.)
Where the temperature or humidity is
too high, or water area, such as bathroom.
(Otherwise, the product may leak
current with the possibility of fire or
electric shock.)
Places where oil content is airborne,
such as in kitchens.
(Otherwise, the product may crack
and injury may occur.)
Where oil or inflammable gas is present
and may be leaked.
(Otherwise, a fire may occur due to
ignition in the product.)
Where the air outlet faces animals or
plants directly.
(Otherwise, it may cause discomfort to
animals and dry out plant.)
Do not carry the product by
holding the front panel.
(Otherwise, the product may slip out
and injury may occur.)
When the product is installed
on wall, be careful not to crash
the product while walking.
(Otherwise, injury may occur.)
CONFIRMATION
AND SETUP
This product is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for the safety.
Children should be supervised to ensure that they do not play with the product.
SETTING AND OPERATING REQUIREMENTS
Do not set the product in the
following places.
Where the product will be exposed directly to
sunlight or outlet of air conditioner.
(Otherwise, deformation, degeneration,
discolor and malfunction may be occured.)
Near equipment such as TV and radio.
(Otherwise, visual disturbances or noises may
be caused.)
Keep the product 1m or above away from such
→
devices.
Do not use the same power socket
with TV, radio etc.
(Otherwise, visual disturbances or noises may
be caused.)
In this case, insert the power plug into another power
→
socket.
Do not use other remote control with
this product.
(Otherwise, an operation error or malfunction
may be caused.)
5
SETTING AND OPERATING REQUIREMENTS
The remote receiver should not be exposed directly to sunlight or the
glare of lighting appliance.
(Otherwise, the remote control may be difficult to operate.)
A magnet is installed at the upper left corner of the product.
Always keep items, such as watch, credit card away from
this product.
(The magnet may disable your watch or credit card.)
If the product is used in the same place for a long period.
Using the product continuously at the same location may result in the surrounding walls or floor to
become dirty. We recommend that you move the product away from where it is placed for maintenance when the product is used on floor or table.
Area that can enhance the effectiveness!
Set it on the floor or table or install it on the
wall against PM2.5 and indoor dust etc.
Way to circulate air more effectively.
Install the equipment with its left, right and top about 30cm or more away from walls,
furniture or curtains, etc, otherwise the dirty air is difficult to be cleared.
To ensure effectiveness of this product, keep its back at least 1cm away from the wall.
Area of the
built-in magnet
ACCESSORIES
The product can be installed on
the wall. You should contact the
dealer for wall installation if necessary.
Do not install the product by yourself.
(Otherwise, the product may fall off due to
inappropriate installation, and cause injury.)
The following accessories are provided with the product in package. When you unpack, check if the
accessories are all included. If not, please contact the dealer.
Code
Drawing QuantityName and Purpose
1
2
3
4
5
6
7
Plastic plug
(ø8x35, for fixing screw to the mounting hole)
Metal hanger
(for suspending product body)
Machine screw
(M4X12, for fixing metal hanger)
Self- tapping screw
(ø4X14, for fixing metal hanger)
Fixation board
(for suspending product body)
Self- tapping screw
(ø3.8x30, for fixing fixation board)
Explosive screw set
(for fixing fixation board)
WARNING
1
1
3
1
3
1
3
6
8
9
10
Remote control
Operating instructions
Installation instructions
1
1
1
Loading...