Panasonic FP-D250, FP-D350, FP-D450, FP-D600 Service manual

WARNING

Back to Model ListFP-D250/D350/D450/D600

Contents / Index

I. Introduction

1. 1 Specifications....................................................................................... 1-1

1. 2 Features............................................................................................... 1-4

1. 3 New functions ...................................................................................... 1-6

1. 4 System Configuration .......................................................................... 1-7

1. 5 Commonality of accessories ................................................................ 1-8

1. 6 Operation ............................................................................................. 1-11

1. 7 Component Location............................................................................ 1-13

1. Outer view........................................................................................ 1-13

2. Inner view......................................................................................... 1-14

3. Fan/Motor Location (FP-D250/D350/D350H) .................................. 1-16

4. Fan/Motor Location (FP-D450/D600)............................................... 1-17

5. Sensor Location............................................................................... 1-18

6. Solenoid/Clutch/Discharge lamp Location ....................................... 1-19

7. PCB Location (FP-D250/D350/D350H) ........................................... 1-20

8. PCB Location (FP-D450/D600)........................................................ 1-20

9. Hard Disk Drive/Zip Drive Location.................................................. 1-21

1. 8 Copy Process....................................................................................... 1-22

1. 9 Precautions with Consumables ........................................................... 1-23

1. 10

Digital Image Control Qualitative Reasoning Based Adaptive Controller..

1-25

II. Sub Assemblies

2. 1 Main Drive............................................................................................ 2-1

2. 2 Operation ............................................................................................. 2-2

1. Sheet bypass paper feed................................................................. 2-2

2. Paper feed unit................................................................................. 2-5

3. Developer unit.................................................................................. 2-8

4. Toner hopper unit............................................................................. 2-16

5. Paper transport unit and separation unit.......................................... 2-20

6. Fuser unit......................................................................................... 2-21

7. Optics unit........................................................................................ 2-26

8. Automatic duplex unit (ADU)............................................................ 2-33

Introduction

Sub

Assemblies

Preventive

Maintenance

Signal Information

PCB Connector and

Troubleshooting

Installation

Unpacking/

of Terms

Glossary

III. Preventive Maintenance

3. 1

Precautions for Preventive Maintenance Service .................................

3. 2 Precautions for handling ...................................................................... 3-3

3. 3 Maintenance chart ............................................................................... 3-5

1. Replacement (For FP-D250)............................................................ 3-5

2. Replacement (For FP-D350/D350H) ............................................... 3-7

3. Replacement (For FP-D450/D600).................................................. 3-9

3. 4 Cleaning Method.................................................................................. 3-11

3. 5 Disassembly......................................................................................... 3-14

1. Multi-feed bypass............................................................................. 3-15

2. Paper feed unit................................................................................. 3-18

3. Developer unit.................................................................................. 3-21

4. Fuser unit......................................................................................... 3-25

5. Optics unit ........................................................................................ 3-30

6. Automatic duplex unit (ADU) (Option).............................................. 3-33

7. Main body ........................................................................................ 3-36

3. 6 Removal of back up battery ................................................................. 3-40

3. 7 Adjustment ........................................................................................... 3-41

1. Exposure Standard Adjustment ....................................................... 3-42

2. Copy density Sensor contamination adjustment.............................. 3-43

3. Skew / Side to side Adjustments (Printer Section) .......................... 3-44

4. Skew / Registration Adjustments (Scanner Section) ....................... 3-46

5. Lead edge / Trail edge void adjustment (Printer Section)................ 3-47

6. Laser power (PWM circuit)............................................................... 3-48

3-1

IV. PCB Connector and Signal Information

4. 1 Glossary of electrical abbreviations ..................................................... 4-1

4. 2 Main CPU PCB (FP-D250/D350 Series) ............................................. 4-7

4. 3 System Control PCB (FP-D250/D350 Series) ..................................... 4-53

4. 4 Control Panel PCB (FP-D250/D350 Series) ........................................ 4-71

1. Control Panel CPU PCB (FP-D250/D350 Series)............................ 4-71

2. Control Panel PCB A (FP-D250/D350 Series)................................. 4-77

3. Control Panel PCB B (FP-D250/D350 Series)................................. 4-81

4. Control Panel PCB C (FP-D250/D350 Series)................................. 4-82

5. Control Panel PCB D (FP-D250/D350 Series)................................. 4-84

4. 5 CCD PCB (FP-D250/D350 Series) ...................................................... 4-85

4. 6 SO DIMM PCB (FP-D250/D350 Series) .............................................. 4-88

4. 7 16 M Flash DIMM PCB (FP-D250/D350 Series) ................................. 4-94

4. 8 LSU Image Data Control PCB (FP-D250/D350 Series)....................... 4-100

4. 9

Automatic Duplex Unit (ADU) Driver PCB (Option) (FP-D250/D350 Series)...

4. 10 Low Voltage Power Supply PCB (FP-D250/D350 Series)................... 4-109

4. 11 High Voltage Power supply PCB (FP-D250/D350 Series)................... 4-117

4. 12 AC Drive PCB (FP-D250/D350 Series) ............................................... 4-118

4. 13 Printer controller PCB (Option) (FP-D250/D350 Series) ..................... 4-120

4. 14 Network card (Option) (FP-D250/D350 Series) ................................... 4-140

4. 15 Hard Disk Drive for Filing/Back-up (FP-D250/D350 Series) ................ 4-148

4. 16 Zip Drive (FP-D250/D350 Series)........................................................ 4-152

4. 17 Main CPU PCB (FP-D450/D600 Series) ............................................. 4-156

4. 18 System Control PCB (FP-D450/D600 Series) ..................................... 4-187

4. 19 Control Panel PCB (FP-D450/D600 Series) ........................................ 4-205

1. Control Panel CPU PCB (FP-D450/D600 Series)............................ 4-205

2. Control Panel PCB A (FP-D450/D600 Series)................................. 4-211

3. Control Panel PCB B (FP-D450/D600 Series)................................. 4-215

4. Control Panel PCB C (FP-D450/D600 Series)................................. 4-216

5. Control Panel PCB D (FP-D450/D600 Series)................................. 4-218

4. 20 CCD PCB (FP-D450/D600 Series) ...................................................... 4-219

4. 21 SO DIMM PCB (FP-D450/D600 Series) .............................................. 4-222

4. 22 16 M Flash DIMM PCB (FP-D450/D600 Series) ................................. 4-228

4. 23 LSU Image Data Control PCB (FP-D450/D600 Series)....................... 4-234

4. 24

Automatic Duplex Unit (ADU) Driver PCB (Option) (FP-D450/D600 Series)...

4. 25 Low Voltage Power Supply PCB (FP-D450/D600 Series)................... 4-243

4. 26 High Voltage Power supply PCB (FP-D450/D600 Series)................... 4-251

4. 27 AC Drive PCB (FP-D450/D600 Series) ............................................... 4-252

4. 28 Printer controller PCB (Option) (FP-D450/D600 Series) ..................... 4-254

4. 29 Network card (Option) (FP-D450/D600 Series) ................................... 4-274

4. 30 Hard Disk Drive for Filing/Back-up (FP-D450/D600 Series) ................ 4-282

4. 31 Zip Drive (FP-D450/D600 Series)........................................................ 4-286

4. 32 Image processing PCB (FP-D450/D600 Series) ................................. 4-290

4-104

4-238

Introduction

Sub

Assemblies

Preventive

Maintenance

Signal Information

PCB Connector and

Troubleshooting

Installation

Unpacking/

of Terms

Glossary

V. Troubleshooting

5. 1 Service Mode....................................................................................... 5-1

1. Service mode functions.................................................................... 5-1

2. Service mode procedure.................................................................. 5-3

3. F4 mode input/output check............................................................. 5-3

4. F5 mode Copier function programming ........................................... 5-17

5. F6 mode Adjustment and programming .......................................... 5-24

6. F7 mode electronic counter ............................................................. 5-32

7. F8 mode copier operation adjustment ............................................. 5-37

8. F9 mode system administration ....................................................... 5-39

5. 2 Self-diagnostics / Machine Malfunctions.............................................. 5-40

1. User error......................................................................................... 5-40

2. Paper Jam........................................................................................ 5-45

3. Machine error................................................................................... 5-50

5. 3 User Preset Mode................................................................................ 5-73

1. Operation procedure ........................................................................ 5-73

2. Example: Paper size setting ............................................................ 5-73

5. 4 Program Update .................................................................................. 5-87

1. Update procedure of the printer controller SIMM............................ 5-87

VI. Unpacking/Installation

6. 1 Precautions on Set Up......................................................................... 6-1

6. 2 Unpacking............................................................................................ 6-2

6. 3 Installation Procedure .......................................................................... 6-3

6. 4 Adjustment ........................................................................................... 6-10

6. 5 Printer Unit/DD Filing Unit Mounting kit (FA-PK30) ............................. 6-13

6. 6 Printer Unit (FA-PC350) / Multi PDL Controller (FA-MC350)............... 6-19

6. 7 Network Adapter Card for Ethernet (FA-NE35) ................................... 6-22

6. 8 Hard Disk Driver for Printer (FA-HD01) ............................................... 6-25

6. 9 DD filing unit (FA-WA01/WA02)........................................................... 6-27

6. 10 Hard Disk Driver for back up (FA-HD02) ............................................. 6-35

6. 11 Hard Disk Driver for Image memory (FA-HD03/HD04)........................ 6-37

VIl. Glossary of Terms

Network, Printing, Copying and imaging Terms .................................. 7-1

TORANO-MAKI (FP-D250/D350 Series) TORANO-MAKI (FP-D450/D600 Series)

Electrical schematic diaglam

WARNING

This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in this service information by anyone else could result serious injury or death.

For U.S.A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment on a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

Any unauthorized changes or modifications to this equipment would void the users authority to operate this device.

For U.S.A

This manual was developed and is supplied to authorized servicing dealers by Panasonic Document Imaging Co. for the sole purpose of providing information necessary for the equipment’s proper support. It is intended that this information be confidential and may not reproduced without prior written consent from Panasonic Document imaging Co. Panasonic Document imaging Co. reserves the right to change any information enclosed herein without prior notification.

This manual was developed and is supplied to authorized servicing dealers by Panasonic Co. for the sole purpose of providing information necessary for the equipment’s proper support. It is intended that this information be confidential and may not be reproduced without prior written consent from Panasonic Co. Panasonic Co. reserves the right to change any information enclosed herein without prior notification.

For U.S.A

For your safety

Caution

This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

DANGER

CAUTION

ATTENTION

VORSICHT

Invisible laser radiation when open. Avoid direct exposure to beam. Invisible laser radiation when open. Avoid direct exposure to beam. Rayonnement laser invisible si ouvert. Dangereux de regarder a l'interieur. Unsichtbare laserstrahlen wenn geöffnet. Nicht hinensehen.

DANGER-Invisible laser radiation when open and interlock defeated.

AVOID DIRECT EXPOSURE TO BEAM.

PRECAUTION

Peligro-Cuando la cubierta esté abierta se podrá escapar radiación de rayo láser. Evite la exposición directa al rayo láser.

Product complies with DHHS Rules 21 CFR Subchapter J in effect of date of manufacture.

FFPTE

Utsunomiya, Tochigi, Japan

For your safety

Caution

This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Invisible laser radiation when open.

DANGER

Avoid direct exposure to beam.

CAUTION

ATTENTION

VORSICHT

CAUTION

Invisible laser radiation when open and interlocks defeated. AVOID EXPOSURE TO BEAM.

VARNING

OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD OCH SPARRAR AR URKOPPLADE. STRALEN AR FARLIG.

Invisible laser radiation when open. Avoid direct exposure to beam. Rayonnement laser invisible si ouvert. Dangereux de regarder a l'interieur. Unsichtbare laserstrahlen wenn geöffnet. Nicht hinensehen.

VORSICHT

Unsichtbare Laserstrahlung, wenn Abdeckung geoffnet und Sicherheitsverriegelung uberbruckt. NICHT DEM STRAHL AUSSETZEN.

VARO!

NAKYMATON AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA LASERSATEIL YLLE. ALA KATSO SATEESEN.

PRECAUTION

ATTENTION

Rayonnement laser invisible dangereux en cas d'ouverture et lorsque la securite est neutralisee. EXPOSITION DANGEREUSE AU FAISCEAU.

VARNING

OSYNLIG LASERSTRALNING NAR DENNA DEL AR OPPNAD OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRALEN.

Peligro-Cuando la cubierta esté abierta se podrá escapar radiación de rayo láser. Evite la exposición directa al rayo láser.

LASER KLASSE 1 LASER CLASSE 1 RANGO LASER 1 CLASS 1 LASER P

(

)

TO IEC 825

ADVARSEL

USYNLIG LASERSTRALING VED ABNING NAR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGA UDSÆTTELSE FOR STRALING.

PELIGRO

Cuando se abre y se invalida el bloqueo, se producen radiaciones invisibles de laser. EVITESE LA EXPOSICION DIRECTA A TALES RAYOS.

ADVARSEL

USYNLIG LASERSTRALING NAR DEKSEL APNES OG SIKKERHEDSLAS BRYTES.

UNNGA EKSPONERING FOR STRALEN.

ODUCT

FFPTE1538

FFPTE2412

Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

For Sweden, and Denmark

SPECIALSÄKRING: ENDAST AV APPARATFABRINKANTEN LEVERERAD

SÄKRING FåR ANVÄNDAS.

VARNING!

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.

ADVARSEL!

Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Lever det brugte batteri tilbage til leverrandoren.

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

For Holland

inleveren als KCA.

Batterij niet

weggooien, maar

For U.K.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR OFFICE THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET. If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED. IMPORTANT: The wires in this mains lead are coloured in accordance with the following

code: Green and Yellow :Earth Blue :Neutral Brown :Live

As the colours of the wires in the main lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by letter E or by the safety EARTH symbol “ ” or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.

Fuse

Section I Introduction

1. 1 Specifications

<Basic Specifications> Type Desk Top Platen Fixed Copy / Print process Laser / Electrostatic photographic method Development process Two component magnetic brush Image control process Digital QUANTUM (QUARC) control Photoreceptor Organic Photo Conductor (OPC) Fusing system Heat and Pressure Maximum original size Ledger (11" × 17") / A3 (297 × 420mm) Paper feed Front loading universal paper cassette

Multi-feed bypass tray

Paper capacity Cassette :

Bypass : 50 sheets Copy size Ledger / A3 – Invoice / A5 Paper exit tray capacity 250 sheets Ambient conditions Temperature : 50–86°F / 10–30 °C

Relative humidity : 30–80% Noise level Stand-by : 32 dB

Operation : 49 dB (FP-D250/D350 series)

Warm up time Approx. 75 sec. (FP-D250/D350 series)

Approx. 180 sec. (FP-D450/D600) Power consumption Less than 1.4 kW (FP-D250/D350 series)

Less than 1.45 kW (FP-D450/D600) Power source AC 120V 60Hz (North America)

AC220 - 240V 50Hz (Europe / Others) Dimensions (W)(D)(H) 23.9" × 30.3" × 24.6" / 606 × 770 × 624 mm Weight 167 lbs / 76kg (FP-D250/D350)

180 lbs / 82kg (FP-D350H)

185 lbs / 84kg (FP-D450/D600) Paper weight Cassette : 16–24 lbs ( 60–90g/m2)

Bypass : 15–34 lbs (55–130g/m

550 sheet × 2 (FP-D250/D350 Series)

550 sheet × 1 (FP-D450/D600)

: 54 dB (FP-D450/D600)

Introduction

)

1-1

Special paper OHP, Label paper, Tracing paper

(Through multi-feed bypass) <Copier Specifications> Resolution 600 dpi (FP-D250/D350 series)

400 dpi (FP-D450/D600) Gradation 256 steps (Photo Mode)

2 steps (Text/Photo Mode) First copy time 3.9 sec. (Letter/A4 size, without Auto mode)

(FA-D250/D350 series)

3.2 sec. (Letter/A4 size, without Auto mode)

(FA-D450)

2.9 sec. (Letter/A4 size, without Auto mode)

(FA-D600)

5.1 sec. (Letter/A4 size, with Auto mode)

(FA-D250/D350 series)

4.0 sec. (Letter/A4 size, with Auto mode) (FA-D450)

3.5 sec. (Letter/A4 size, with Auto mode) (FA-D600)

Copy ratio Enlargement (fixed) : (North America)

2.00, 1.55, 1.29, 1.21

: (Europe / others)

2.00, 1.73, 1.41, 1.22, 1.15

Reduction (fixed) : (North America)

0.79, 0.77, 0.65, 0.61, 0.50 (Europe / others)

0.87, 0.82, 0.71, 0.58, 0.50

Zoom : 25%-400% (1% step) Copy speed D250

D350 series

D450 D600 Ledger / A3 : 18 CPM 20 CPM 29 CPM 34 CPM Legal / B4,FLS : 20 CPM 23 CPM 33 CPM 39 CPM Letter-R / A4R : 23 CPM 28 CPM 38 CPM 49 CPM Letter / A4 : 28 CPM 35 CPM 45 CPM 60 CPM Invoice / A5 : 28 CPM 35 CPM 45 CPM 60 CPM

Continuous copying 1-999 reset to 1

1-2

<Printer Specifications> Resolution Max. 600 dpi (True) / 1200 dpi (Smoothing) Print speed

28 ppm (pages per minute) Letter / A4 (FP-D250) 35 ppm (pages per minute) Letter / A4 (FP-D350 series) 45 ppm (pages per minute) Letter / A4 (FP-D450) 50 ppm (pages per minute) Letter / A4 (FP-D600)

Print size Ledger / A3 - Invoice / A5 Memory capacity 8 MB / Standard (expandable up to 40MB) Spooling Memory Hard Disk (120, 256 or 512 MB/option) Printer Description Language

PCL 5e emulation, Postscript level 2 emulation (Option)

Interface Bi-directional parallel (IEEE1284), Network I/F (option) Font In accordance with emulation type Operating system Windows 3.1 (North America), Windows 95,

Windows 98, Windows NT 4.0, MacOS 7.5.2/8.X (MacOS7.5.2 support available with Postscript option)

<Network Specifications> Board type Option board connected to printer unit Memory capacity 1 MB Connecting type Ethernet (100 BaseTX, 10 BaseT) Communications protocol Ethernet (TCP/IP, IPX/SPX, EtherTalk) Operating system Windows 3.1/95, Windows NT4.0,

Mac OS, NetWare 3.1x/4,X

Introduction

<Filing Specifications> Resolution 600 dpi (400dpi : D450/D600), 300 dpi and 200 dpi Paper size Ledger/A3 - Invoice/A5 Storage media Hard disk Storage capacity 2 GB (For filing storage 1.5 GB, for system files/copy

image storage 0.3 GB)

External storage device Zip drive (100 MB) File format TIFF Compression type JBIG (600 dpi)

MMR (200/300 dpi)

* Specifications are subject to change without notice.

1-3

1. 2 Features

1. Use of new digital technology

1) Optimum image quality is maintained for a long period in varying environmental conditions with the use of Digital QUANTUM (QUARC) technology. Digital QUANTUM (QUARC): Digital Qualitative Reasoning Based Adaptive Controller.

2) Unique functions such as digital skyshot, page number print and much more, makes useful and interesting image effects.

2. Quick speed operation

1) With the use of speed control clutch in the paper feed unit, a 2.9 sec. first copy speed which is the fastest in this range be achieved. (FP-D600)

2) Original throughput speed from the i-ADF/ADF (optional) is the same as machine speed. (100%throughput) (Except for FP-D600)

3. User friendly operation

1) Bi-directional communication touch panel display enables easy operation by simply touching the icon on the wide screen.

2) Paper level sensor in the cassette indicates a low paper condition. This function prevents no paper condition during the operation.

4. Various optional accessories are available for functional expansion.

1) Operational efficiency can be further increased by attaching ADF, Finisher, LCC and system console.

1. High resolution printing of 600 x 600dpi (1200dpi: Smoothing)

1) Enables the printing of documents, photographs, and fine line drawings from the PC. By changing the resolution to 300 x 300dpi, printing time can be minimized.

2. Ledger/A3 size printing

1) Enables the printing of Invoice/A5 to Ledger/A3 size. Useful for output such as drawings.

1-4

3. Printing speed of 50 prints per minute (Letter/A4)(FP-D600)

1) Enables high volume document printing in a short time.

4. PCL5e format printer

1) PCL5e is the Page Description Language of the Hewlett-Packard Company.

5. Windows® 95/Windows® 3.1/Windows NT®4.0

1) The made document can be printed out using application software designed for Windows ing systems.

95, Windows® 3.1 (North America) & Windows NT® 4.0 operat-

6. Fonts

1) The printer comes with 45 scaleable fonts.

2) You can scale TrueType fonts within the printer. You also receive matching TrueType screen fonts for true WYSIWYG, short for "What you see is what you get". These internal fonts are part of the PCL language.

7. Options

1) Expansion memory (16 MB) Faster print speed can be expected by speed of rasterrinsing process. When the image processing memory of the copier is 8 MB (FP-D250 : All, FPD350 : except North America) : If the machine error often occurs when the high density of information document (such as gray color A3 size print) is being printed, even though printer memory is additionally installed, install the additional image memory of the printer (8MB/16MB)

Introduction

2) Hard disk Enables the install action of additional fonts which are not included in the unit.

3) Network unit Use as local network printer in the office. Network format is Ethernet. When the Ethernet is installed, operation status of the printer and connection of the optional accessories can be checked form the PC.

1-5

1. 3 New functions

1. Digital Skyshot

Black edges are removed automatically, however if the original is not square to the original guide the copy may have some edges printed in black.

2. Page Number print.

The page number can be automatically printed on each page.

3. Multi Original Image Rotation

If the paper direction in the cassette is different from the direction of the original, the image is automatically rotated 90 degrees so that the proper copy is obtained.

4. N in 1 copy mode

From two (or four) 1-sided originals side by side to 1-sided copies can be made.

5. Wide Zoom Ratio (25%-400%)

Copies can be made from 25% to 400% of the original document size at 1% increments.

6. X-Y Zoom

Independent height-width zoom copies can be made.

1-6

1. 4 System Configuration

Exit Tray FA-X350

Inverting

Shift Tray

FA-TR350

2 Bin Inverting

Shift Tray

FA-TR355

2 Bin Finisher

FA-F320

Exit Guide Unit

3 Bin Finisher

FA-F350/F355

FA-FK35

Inverting Unit FA-RU350

Platen Cover

FA-UC20

Automatic Document

Feeder

FA-A355

Inverting Automatic

Document Feeder

FA-A888

Personal Card

FA-KP01

Hard Disk Drive

for Printer

Hard Disk Drive

for Mirroring

FA-HD02

Hard Disk Drive

for Image memory

FA-HD03 (For FP-D250/D350/D350H) FA-HD04 (For FP-D450/D600)

FA-HD01

Card Reader

System Stand

FA-DS725 FA-DS825

Mounting kit

FA-PK30

Platen cover Mounting Kit

FA-GK35

Mounting Kit

FA-PK30

DD Filing Unit

FA-WA01 (For FP-D250/D350/D350H) FA-WA02 (For FP-D450/D600)

H/D (2GB) Personal Card x 10 pcs Card Reader Zip Drive Battery

7 7

Printer

Memory

(16MB)

FA-PM16

PCL5e Printer Unit

FA-PC350

ZIP Drive

Automatic Duplex unit

FA-MADM65

Paper drawer Kit

FA-DK10

Printermemory

(32MB)

FA-PM32

Multi Page Description

Language Controller

(PCL5e / PS-II) FA-MC350

3000 Sheet Cassette FA-MA301

DD Server Software

Network Adapter Card EtherNet : FA-NE35

550 Sheet Paper Drawer

FA-MA0555

FA-WS10

Server

DD Browser

Software

FA-WB10

1 • Original face down 2 • Optional platen cover mounting kit (FA-GK35) is required to install platen cover 3 • 550 module can be installed all 3 slots

• Drawer kit (FA-DK10) is required for lower slot

4 • Staple (50 sheets)

• Shift

• For FP-D450/D600 (FA-F355) 5 • In case face down exit is required with FA-F350/355 6 • Optional exit guide unit (FA-FK35) is required to install finisher

[Not required for FA-F350/355 when FA-RU350 is installed] 7 • Except for North America and Europe 8 • Hole punch

• Staple (30 sheets, bottom bin only)

• Shift (bottom bin only)

• For FP-D250/D350

9 • For North America

1-7

Introduction

1. 5 Commonality of accessories

Model Number

FP-D250

FP-D350H FP-D450

D350

Standard

Main

Accessories

Description

System Stand System Stand 550 Sheet Paper

Drawer Paper Drawer Kit for

System Stand

Automatic Duplex Unit

3000 Sheet Cassette Platen Cover Platen Cover

Mounting Kit Automatic

Document Feeder Inverting Automatic

Document Feeder Check Guide Kit for

ADF (FA-A888) Platen Glass Kit

Platen Glass Kit

Exit Tray 3 Bin Finisher 3 Bin Finisher 2 Bin Finisher Exit Guide Unit

Inverting unit 2 Bin Inverting Shift

Tray Inverting Shift Tray Image Processing

Memory (8 MB) Image Processing

Memory (16 MB)

Model number

FA-DS725 FA-DS825 FA-MA0555

FA-DK10

FA-MADM65

FA-MA301 FA-UC20 FA-GK35

FA-A355

FA-A888

FFPTL0277

FFPTL0323

FFPTL0324

(D350:

Standard) FA-X350 FA-F350 FA-F355 FA-F320 FA-FK35

FA-RU350 FA-TR355

FA-TR350 FA-DM08

FA-DM16

D600

Standard

Remarks

Kit required for FA-MA0555 installation in bottom slot of FA-DS725

Available through parts route

This kit is required when installing FA-A888 (North America) Available through parts route

This kit is required when installing FA-A888 (Europe) Available through parts route

For North America

Required for : FA-F320 and FA-F350/F355 when FA-RU350 is not installed.

For FA-F350/F355

Expansion memory limited to 8 MB or 16 MB

Except for North America and Europe

1-8

Operators Guide Pocket

Dehumidifier Heater for Optics

Dehumidifier Heater for Drum

Key Counter Harness Kit

Dehumidifier Heater

Main

Accessories

Network

Accessories

Consumables

for System Stand Dehumidifier Heater

for LCC Dehumidifier Heater

for LCC Blind Cover kit Printer Unit / DD

Filing Unit Mounting Kit

Hard Disk Drive for Image Memory

Printer Unit Multi Page Description

LanguageController

Printer

Hard Disk Drive for Printer

Printer Memory (16MB)

Printer Memory (32MB)

Network Unit for Ethernet

Toner

Developer

Developer Drum

Waste Toner Bottle Staple

Staple

Description

Model number

FFPXJ19908

FFPTL0304

FFPTL0270

FFPTL0308

FFPTL0273

FFPTL0274

FFPTL0275

FFPTL0276

FFPTL0326 FA-PK30

FA-HD03 FA-HD04 FA-PC350 FA-MC350

FA-HD01

FA-PM16

FA-PM32

FA-NE35

FQ-TL20

FQ-TL24

FQ-ZL20

FQ-ZL30 FQ-HL20

FQ-BA10 FQ-SS75

FQ-SS32

Model Number

D350

FP-D350HFP-D250

Standard

FP-D450 D600

Remarks

Available through parts route

For North America Available through parts route

For Europe Available through parts route

For North America Available through parts route

For Europe Available through parts route

Available through parts route This kit is required when

installing printer unit

8MB

2GB

Expansion memory limited to 16 MB or 32 MB

Except for North America and Europe

10/100 base TX

20,000 copies (Letter/A4, 6% density)

24,000 copies (Letter/A4, 6% density)

120,000 copies (FP-D350) 80,000 copies (FP-D250)

120,000 copies 120,000 copies (FP-D350/D450/D600) 80,000 copies (FP-D250)

For use in FA-F350/F355 (5,000 staples)

For use in FA-F320 (3,000 staples)

Introduction

1-9

DD filing

Accessories

Description

DD Filing Unit DD Filing Unit Personal Card DD Browser

Software DD Server Software Hard Disk Drive for

Back-up

Model number

FA-WA01 FA-WA02 FA-KP01 FA-WB10

FA-WS10 FA-HD02

Model Number

D350

FP-D350HFP-D250

Standard

FP-D450 D600

Remarks

For FA-WA01/WA02

1-10

1. 6 Operation

FP-D250 / D350 / D450 / D600

TOUCH PANEL

MULTI-SIZE

FEED

SORT/ FINISH

MULTI-SIZE

SORT/

FEED

FINISH

ORIGNAL SIZE COPY SIZE

USER PRESET

DISPLAY

ENERGY SAVER

OPERATION SWITCH (D450/D600)

ORIGINAL SIZE

COPY SIZE

FP-D250 / D350 / D450 / D600 (Printer, Filing, option)

TOUCH PANEL

MULTI-SIZE

FEED

SORT/ FINISH

USER PRESET

ADD PAPER

DISPLAY

ONLINE

DATA

MANUAL

ENERGY SAVER

START

DOCUMENT SAVE

ENERGY SAVER

INTERRUPT

INTERRUPTMANUAL

RESET

CLEAR

STOP

START

Ready Indicator Ready:GreenLED Not ready:RedLED Copy Reservation:FIashing

MANUAL

INTERRUPT

Introduction

RESET

CLEAR

STOP

OPERATION SWITCH (D450/D600)

MULTI-SIZE

USER

SORT/

FEED

PRESET

FINISH

ORIGNAL SIZE COPY SIZE

ORIGINAL SIZE

ADDPAPER

COPY SIZE

COPY

ONLINE DATA

ADVANCED FUNCTIONS

ENERGY SAVER

MANUAL

RESET

DOCUMENT SAVE

ADVANCED FUNCTIONS

INTERRUPT

CLEAR

STOP

START

RESET

START

Ready Indicator

STOP

CLEAR

Ready:GreenLED Not ready:RedLED Copy Reservation:FIashing

1-11

FP-D250 / D350 / D450 / D600 (DD filing, option)

TOUCH

MULTI-SIZE

FEED

SORT/ FINISH

MULTI-SIZE

SORT/

FEED

FINISH

ORIGNAL SIZE COPY SIZE

USER PRESET

ADD PAPER

USER PRESET

ADDPAPER

PANEL DISPLAY

ONLINE

DATA

ONLINE DATA

DOCUMENT SAVE

ADVANCED FUNCTIONS

DOCUMENT SAVE

ENERGY SAVER

MANUAL

INTERRUPT

START

MANUAL

RESET

CLEAR

STOP

INTERRUPT

OPERATION SWITCH (D450/D600)

ORIGINAL SIZE

COPY

COPY SIZE

ADVANCED FUNCTIONS

START

STOP

Ready Indicator Ready:GreenLED Not ready:RedLED Copy Reservation:FIashing

RESET

CLEAR

1-12

1. 7 Component Location

1. Outer view

Control panel

Operation Switch (D450/D600)

Paper exit door

Power switch (D450/D600 : inside of front door)

Paper drawer / tray or ADU (Automatic duplex unit) (Option: FP-D250/D350/D350H Standard: FP-D450/D600)

Paper drawer/tray

Front door

Platen cover (option)

Zip Drive (Option: FP-D250/ D350/D450/D600 Standard: FP-D350H)

Bypass

Paper feed door

Introduction

1-13

2. Inner view

1. Fuser area cover

2. Toner bottle

3. Drum unit

4. Developer unit

5. Toner hopper unit

6. Developer release lever

7. Waste toner bottle

8. Total counter

23456

78910111213

SV711

9. Manual paper feed knob

(Feed unit)

10. Paper transport handle

11. Transfer/Separation corona

12. Paper transport unit

13. Manual paper feed knob

(Fuser unit)

1-14

2. Inner view

31 30

29 28

23456789

Introduction

10 11 12

27 26 25

24 23 22 20 19 18

1 Half-speed unit 2 Full-speed unit 3 Thermistor 4 Lens unit 5 Main motor 6 CCD unit 7 Charge corona 8 Slit glass

9 Laser unit 10 Magnetic roller 11 Registration roller 12 Bypass pick-up roller 13 Bypass paper feed roller 14 Bypass DFP roller 15 Middle roller 16 Paper feed roller

*Included with the ADU unit. (Option: FP-D250/D350/D350H, Standard: FP-D450/D600)

17 DFP roller 18 Pick-up roller 19 ADU Paper feed roller* 20 Transport / Separation corona 21 Drum 22 Transport belt 23 Pressure roller 24 Fuser lamp 25 Fuser separation finger (lower) 26 ADU guide roller* 27 Fuser separation finger (upper) 28 Paper exit roller 29 Paper exit sensor 30 Heat roller 31 Cleaning web roller 32 Full-speed unit home position sensor

13 14

1-15

3. Fan/Motor Location (FP-D250/D350/D350H)

Optics fan

*Printer controller cooling fan

*Power supply cooling fan

Exhaust fan

Main motor

Suction/ Ozone fan

Lifting motor (upper stage)

Lifting motor (lower stage)

* Included with the ADU unit (Option: FP-D250/D350, Standard: FP-D350H)

(Option)

and Printer unit.

Optics drive motor Developer Unit cooling fan

Toner bottle motor

Dust collecting fan

ADU drive

motor *

ADU paper length guide motor

* ADU paper

width guide motor

1-16

4. Fan/Motor Location (FP-D450/D600)

Introduction

Optics fan

*Printer controller cooling fan

Power supply cooling fan

Exhaust fan

Main motor

Suction/ Ozone fan

Lifting motor (lower stage)

* Included with the Printer unit.

Optics drive motor Developer Unit cooling fan

Toner bottle motor

Dust collecting fan

ADU drive motor

ADU paper length guide motor

ADU paper width guide motor

(Option)

1-17

5. Sensor Location

Platen cover

angle

Platen cover

open/close

Original size

Lamp unit

home position

Paper exit

Registration roller paper pass

Paper feed cover open/close

Toner bottle home position

Toner level Bypass paper size

Front cover open/close

* ADU paper

pass 1

* ADU paper

length

Copy density

Toner density

* ADU

detection

* Included with the ADU unit. (Option: FP-D250/D350/D350H, Standard: FP-D450/D600)

* ADU paper width

* ADU paper

pass 2

* ADU paper

detection

Paper limit (upper stage : D250/D350/ D350H)

Paper detention

Paper level (lower stage) Paper level (upper stage : D250/D350/D350H)

Bypass paper detection

Total counter Waste toner

bottle Middle roller paper pass

(upper/lower stage) Paper limit

(lower stage)

Paper detection (lower stage)

1-18

6. Solenoid/Clutch/Discharge lamp Location

Operation Switch (D450/D600)

* Paper exit

solenoid

Door switch

Laser unit switch

Power switch

Separation solenoid (FP-D450/D600)

Discharge lamp Paper feed speed

control clutch Registration roller clutch Middle roller clutch Paper feed clutch

Paper feed clutch Pick-up solenoid

(upper stage : D250/D350/D350H) Paper feed clutch

(lower stage) * ADU clutch

Pick-up solenoid (lower stage)

Recycle solenoid

Introduction

* Included with the ADU unit. (Option: FP-D250/D350/D350H, Standard: FP-D450/D600)

1-19

7. PCB Location (FP-D250/D350/D350H)

LVPS (Low voltage power supply)

Printer controller (option)

AC driver

*NAC

System Control

Main CPU

*Control panel D

Control panel B

Automatic duplex unit driver

Touch panel

(Option)

8. PCB Location (FP-D450/D600)

LVPS (Low voltage power supply)

*Control panel D

Control panel B

Touch panel

Control panel

CCD control

*Control panel C

Control panel A

HVPS (High voltage power supply)

Control panel

CCD control

*Control panel C

Control panel A

CPU

Printer controller (option)

AC driver

NAC (option)

System Controller

1-20

CPU

Automatic duplex unit driver

(Option)

Image Processing

HVPS (High voltage power supply)

Printer Controller (Option)

9. Hard Disk Drive / Zip Drive Location

*Hard disk for filing

Hard disk for printer (Option)

(Option: FP-D250/D350/D450/D600, Standard: FP-D350H)

Hard disk for back-up (Option)

*Zip drive

Introduction

1-21

+ 756 hidden pages