Panasonic FD-E22 User Manual

Smallest in the

industry

Sleeve head diameter

of 0.25 mm!!

Thru- beam type FT-E12,
FT-E22

The sleeve head diameter
has been made smaller
compared with our previous
models (FT-E10: 0.4mm
and FT-E20: 0.5mm)
producing an ultra-small
diameter size of 0.25mm
(FT-E12), the smallest in
the industry. This has
improved the sensing
capability for minute
workpieces such as the
0603 chip.

Thru-beam type ultra-small diameter fiber

FT-E12, FT-E22

(The picture above shows FT-E12.)

FT-EandFD-E-page01.htm

file:///G|/FT-EandFD-E/FT-EandFD-E-page01.htm (1 of 2) [6/11/2001 10:53:43 AM]

Thru- beam type FT-E12,
FT-E22

The mounting sleeve length
has been made shorter
(10mm) compared with our
previous models (FT-E10:
15mm, FT-E20: 15mm).
A compact mounting is
available to work with
advanced miniaturized
equipment.

Reflective type FD-E12,
FD-E22

Unlike the previous models,
FD-EN500S1 and
FDENM1S1 (both M3
threaded types), the 3 mm
sleeve types have been
lined up.
These current models
feature the ability to adjust
mounting positions
(FD-E22).

Applications

Reflective type ultra-small

diameter fiber

FD-E12, FD-E22

(The photograph shows

FD-E12.)

Thru-beam type FT-E12,
FT-E22
Sensing passage of minute
workpieces such as chips,
etc.
A sensing range as tong as
40mm (FT-E22) is possible
with an ultra-small diameter
sleeve of 0.4mm.

Reflective type FD-E12,
FD-E22
Confirmation of suction of
minute workpieces such as
chips, etc.

A sensing range of 20mm
(FD-E22) is possible with an

ultra-small diameter sleeve of

0.65mm.

FT-EandFD-E-page01.htm

file:///G|/FT-EandFD-E/FT-EandFD-E-page01.htm (2 of 2) [6/11/2001 10:53:43 AM]