Panasonic EY6405-U1, EY6409-U1, EY6432-U1 Service Manual
1 SCHEMATIC DIAGRAM 2
2 WIRING CONNECTION DIAGRAM
2
3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS
3
© 2002 Matsushita Electric Works Ltd. All rights
reserved. Unauthorized copying and distribution is a
violation of law.
EY6405-U1
EY6409-U1
EY6432-U1
4 TROUBLESHOOTING GUIDE 7
5 EXPLODED VIEW
9
6 REPLACEMENT PARTS LIST
10
Cordless Drill & Driver
SPECIFICATIONS
CONTENTS
Page Page
ORDER NO.PTD0207U33C1
F16
1 SCHEMATIC DIAGRAM
2 WIRING CONNECTION DIAGRAM
2.1. EY6405/EY6409
2.2. EY6432
2
EY6405-U1 / EY6409-U1 / EY6432-U1
■HOW TO DISASSEMBLE KEYLESS CHUCK.
3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS
Ref. No. 1A Procedure 1A Removal of the Keyless Drill Chuck.
Fig.1
Fig.2
Fig.3
1. Set the clutch handle to position and select "LOW"
position.
2. Turn the lock collar counterclockwise direction to open the chuck
jaws.
3. Use a screwdriver to turn the chuck fastening screw inside the
chuck clockwise direction of the arrow, and remove the screw.
(See Fig.1)
NOTE :
If the chuck fastening screw will not come loose, insert the
allen wrench into the chuck and lightly tap in the clockwise
direction with a hammer to tighten the chuck, and then loosen
the chuck fastening screw. (See Fig.2)
4. Insert the allen wrench into the chuck, and turn counterclockwise
direction in the arrow with holding the unit by the vise to remove
the chuck. (See Fig.3)
3
EY6405-U1 / EY6409-U1 / EY6432-U1
■HOW TO DISASSEMBLE MAIN UNIT.
Ref. No. 2A Procedure 2A Removal of the Housing.
1. Remove eight housing screws.
(See or Fig.4 or Fig.5)
EY6405/EY6409 EY6432
Fig.4 Fig.5
Ref. No. 2B Procedure 2A →→→→ 2B Removal or attachment of the Motor.
Fig.6
(Removal)
1. Take out the motor with the gear box block from housing.
2. Separate the motor from the gear box block by twisting the motor
to unlock tabs.
(Attachment)
3. Motor mounting base and the positioning rib of gear case should
be set. (See Fig.6)
4
EY6405-U1 / EY6409-U1 / EY6432-U1
Loading...