Panasonic ET-PKL100S User Manual
Ceiling mount bracket for low ceilings
ET-PKL100S
Description
This ceiling mount bracket is to be used when mounting projectors to low ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W × H × D):
Weight: 0.7 kg*2 (1.5 lbs)*
+5°, -15°
1
±10°*
±5°
160 × 76 × 150 mm (6-5/16× 3 × 5-29/32 inches)
2
Applicable bracket assembly: ET-PKL420B/PKL430B/PKV400B
1
Correction angle when using together with the PKL420B/PKL430B/PKV400B.
*
2
Average value. May differ depending on models.
*
Weights and dimensions shown are a pproximate. S pecifications a nd appearance are subject to change without notice.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hex head bolt,captive washer(M6 × 12) . . . . . . . . 4
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed Installation instructions thoroughly before starting. The instructions for installing the drop-
prevention wire are given in the Installation Instructions for the base mount bracket.
• Do not use an electric screwdriver or impact driver to tighten screws.
Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
4-ø11.5
(ø7/16)
25
(31/32)
132
(5-3/16)
142
(5-19/32)
(3)
76
150160
(5-29/32)(6-5/16)
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
As of May 2014 1/3
SFL14A013
Ceiling mount bracket for low ceilings
Dimensions
The illustration shows the ceiling mount bracket when it is combined
with the ET-PKL420B and the PT-LW330/LW280/LB360/LB330/LB300/LB280 is attached.
149
(5-7/8)
ET-PKL100S
158
(6-7/32)
78
(3-1/16)
(6-31/32)
177
35.3
(1-3/8)
146.5
(4-5/32)(5-25/32)
(2-19/32)
132
(5-3/16)
105.5
66
The illustration shows the ceiling mount bracket when it is combined
with the ET-PKL430B and the PT-TW341R/TW340/TW250/TX400/TX310/TX210 is attached.
25
71
(2-25/32)
(31/32)
142
(5-19/32)
158
(6-7/32)
78
(3-1/16)
(6-31/32)
177
152
(5-31/32)
70.7
(2-25/32)
186.5
142.5
(5-5/8)(7-11/32)
66
(2-19/32)
71
(2-25/32)
142
(31/32)
(5-19/32)
25
132
(5-3/16)
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
As of May 2014 2/3
SFL14A013
Loading...