Panasonic ET-PKL100H User Manual
Ceiling mount bracket for high ceilings
ET-PKL100H
Description
This ceiling mount bracket is to be used when mounting projectors to high ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W × H × D):
Weight: 1.8 kg*2 (4.0 lbs)*
+5°, -20°
1
±10°*
±5°
150 × 293– 373 × 160 mm (5-29/32 × 11-17/32–14-11/16 × 6-5/16 inches)
2
Applicable bracket assembly: ET-PKL420B/PKL430B/PKV400B
1
Correction angle when using together with the PKL420B/PKL430B/PKV400B.
*
2
Average value. May differ depending on m odels.
*
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster B. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 16) . . . . . . . 19
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed Installation instructions thoroughly before starting. The instructions for installing the drop-
prevention wire are given in the Installation Instructions for the base mount bracket.
• Do not use an electric screwdriver or impact driver to tighten screws.
Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
132
(5-3/16)
4-ø11.5
(ø7/16)
142
(5-19/32)
293–373
(11-17/32–14-11/16)
150160
(5-29/32)(6-5/16)
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
As of May 2014 1/3
SFL14A012
Ceiling mount bracket for high ceilings
Dimensions
The illustration shows the ceiling mount bracket when it is combined
with the ET-PKL420B and the PT-LW330/LW280/LB360/LB330/LB300/LB280 is attached.
ET-PKL100H
ø48.6
(ø1-29/32)
167.5
367–447*
(14-7/16–17-19/32)*
68.5
(2-11/16)
167.5
(6-19/32)(6-19/32)
Adjustable in 20 mm (25/32˝) steps
*
35.3
(1-3/8)
(6-3/16)
(5-19/32)
(ø1-21/32)
95157
(3-3/4)
71 (2-25/32)
142
The illustration shows the ceiling mount bracket when it is combined
with the ET-PKL430B and the PT-TW341R/TW340/TW250/TX400/TX310/TX210 is attached.
ø42
66
(2-19/32)
132
(5-3/16)
167.5
370–450*
(14-9/16–17-23/32)(2-25/32)
70.7
68.5
(2-11/16)
167.5
(6-19/32)(6-19/32)
Adjustable in 20 mm (25/32˝) steps
*
ø48.6
(ø1-29/32)
ø42
(ø1-21/32)
132197
(5-3/16)(7-3/4)
71 (2-25/32)
66
132
(2-19/32)
(5-3/16)
142
(5-19/32)
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
As of May 2014 2/3
SFL14A012
Loading...