Panasonic ET-PKE1000S User Manual

181

Ø9.5 (3/8˝)

Ø8.5 (11/32˝)

PT-AE2000

Attachement plate

20 (2-9/16˝)

150 (5-29/32˝)

160 (6-5/16˝)

82 (3-7/32˝) 32 (1-1/4˝)

140 (5-1/2˝)

114 (4-1/2˝)

130 (5-1/8˝)

104 (4-3/32˝)

(2-3/4˝)

(31/32˝)

(7-1/8˝)

(2-9/16˝)

S PEC F ILE

ET-PKE1000S

Ceiling mount bracket for low ceilings

As of September 2007 < 1 >

Specifications Vertical correction angle: +5°, -15°

Horizontal slant correction angle: ±10° Horizontal turn correction angle: ±5° Dimensions (W x H x D): 468 x 200 x 191 mm (18-7/16˝ x 7-7/8˝ x 7-17/32˝) Weight: 1.9 kg (4.2 lbs)

Attachment plateIllustration shows the ET-PKE1000S attached to

the PT-AE2000.

Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . 1

Projector mount bracket . . . . . . . . . . . . . . . . 1

Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . 1

Washer-fitted screws (M4 x 8) . . . . . . . . . . . 10

Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . 2

Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Weights and dimensions shown are approximate. Specifications subject to change without notice.

unit : mm (inch)

NOTE: This illustration is not drawn to scale.

Dimensions

Description

This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.

Caution:

• All mounting work must be done by a qualified technician.

• Ensure that the mounting (ceiling) area has sufficient strength.

• Read the enclosed mounting instructions carefully before starting the mounting procedure.

• When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.

• Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool

should be used.