Panasonic ET-PKD77H User Manual
A
S PEC F ILE
ET-PKD77H
Ceiling mount bracket for high ceilings
As of September 2006 < 1 >
Specifications
Vertical correction angle: +5°, -17°
Horizontal slant correction angle: ±2.5°
Horizontal turn correction angle: ±1.2°
Dimensions (W x H x D): 344 x 340– 420 x 345 mm
(13-17/32˝ x 13-3/8˝–16-17/32˝ x 13-19/32˝)
Weight: 9.7 kg (21.4 lbs)
Attachment plateIllustration shows the ET-PKD77H attached to the projector.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 1 . . . . . . . . . . . . . . . . . . . . 1
Pole support bracket 2 . . . . . . . . . . . . . . . . . . . . 1
Pole fixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Washer-fitted hexagonal bolts (M6 x 80) . . . . . . 2
Washer-fitted screws for safety fitting (M4 x 8) . . 4
Washer-fitted hexagonal bolts (M6 x 12) . . . . . 35
Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . 2
Wire rope (SU304, Ø1.5 mm, 2 m) . . . . . . . . . . . 2
Wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Sealing packing . . . . . . . . . . . . . . . . . . . . . . . . . 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This ceiling mount bracket is to be used when mounting Panas onic projectors to the ceiling.
Caution:
Mounting should be done by a qualified technician. Make s ure that the mounting (ceiling) area has
sufficient s trength. Read the enclosed mounting ins tructions thoroughly before starting.
ttachment plate
Ø60.5
Ø2-3/8˝
440
340–420*
271 298
11-23/32˝7-9/32˝
Projector
17-5/16˝
13-3/8˝–16-17/32*
Adjustable in
40 mm (1-9/16˝)
steps
200
7-7/8˝
300
11-13/16˝
200
7-7/8˝
344
13-17/32˝
100
3-15/16˝
344
13-17/32˝
100
3-15/16˝
345
13-19/32˝
Attachment plate
Loading...