Panasonic ET-PKB2 User Manual
S PEC F ILE
ET-PKB2
Ceiling mount bracket
As of July 2010
SFL10A001
1/2
Specifications Vertical correction angle: +5°, -20°
Horizontal slant correction angle: ±10°
Horizontal turn correction angle: ±5°
Dimensions (W × H × D): 260 × 296 – 376 × 172 mm
(10-1/4˝ × 11-21/32˝–14-13/16˝ × 6-25/32˝)
Note: Height (H) include holding brackets.
Weight: 2.4 kg (5.3 lbs)
Illustration shows the bracket attached to the PT-LB2/LB1.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . .1
Projector mount bracket . . . . . . . . . . . . . . . . . .1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . .1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . .1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . .1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . .1
Washer-fitted hexagonal bolts (M6 × 12) . . . . .19
Washer-fitted screws (M4 × 10) . . . . . . . . . . . . .3
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
The ceiling mount bracket is to be used when mounting the PT-LB2 or other projector to the
high ceiling.
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional
disposal service.
335– 415
10°
10°
67.5
(2-21/32)
142
(5-19/32)
307 (12-3/32)
Attachement plate
∅49
(1-15/16)
∅42
Adjustable in
(13-3/16–16-11/32)
20 mm (25/32) steps
20°
5°
100
(3-15/16)
(1-21/32)
70
(2-3/4)
Projector
65
(2-9/16)
S PEC F ILE
ET-PKB2
Ceiling mount bracket
As of July 2010
SFL10A001
2/2
Attachment plateIllustration shows the bracket attached to the PT-ST10.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Attachment plate
10°
10°
(6-3/8)
67.5
(2-21/32)
162
Attachement plate
∅49
(1-15/16)
337–414
Adjustable in
(13-9/32–16-5/16)
20 mm (25/32) steps
20°
5°
174
(6-27/32)
284.5 (11-3/16)
∅42
(1-21/32)
Projector
327 (12-7/8 )
65
(2-9/16)
A2
70
(2-3/4)
3-∅9.5 (3 /8)
∅8.5 (11/32)
130 (5 -1/8)
100 (3 -15/16 )
150 (5 -29/ 32 )
110 (4-11/ 3 2 )
140 (5-1/2)
160 (6 -5 /16 )
20 (25/32)
Loading...