Panasonic ET-PFD100 User Manual

S PEC F ILE

ET-PFD100

Frame

As of December 2007 < 1 >

Specifications

Dimensions (W x H x D): 655 x 399 x 907 mm (25-25/32˝ x 15-23/32˝ x 35-23/32˝) Weight: 17.2 kg (37.9 lbs)

Weights and dimensions shown are approximate. Specifications subject to change without notice.

Illustration shows the ET-PFD100 attached to the projector.

unit : mm (inch)

NOTE: This illustration is not drawn to scale.

Dimensions

Description

This frame is to be used exclusively with Panasonic DLP™ projectors. This mount bracket is to be used when stack-

ing two DLP™ projector units.

Parts Horizontal frames . . . . . . . . . . . . . . . . . . . . 2

Upper pipes . . . . . . . . . . . . . . . . . . . . . . . . 3

Lower pipes . . . . . . . . . . . . . . . . . . . . . . . . 3

Upper pipe mount brackets . . . . . . . . . . . . 6

Lower pipe mount brackets . . . . . . . . . . . . 6

Washer-fitted hex bolts (M6 x 12) . . . . . . . 12

Washer-fitted hex bolts (M6 x 50) . . . . . . . . 5

Washer-fitted hex bolts (M6 x 40) . . . . . . . 24

Spring washers (M10) . . . . . . . . . . . . . . . . . 8

Hex bolts (M10 x 140) . . . . . . . . . . . . . . . . . 4

Flat washers (M10) . . . . . . . . . . . . . . . . . . . 8

Hex washers (M10) . . . . . . . . . . . . . . . . . . . 8

Adjustment nuts (M10) . . . . . . . . . . . . . . . . 4

Caution:

• All work must be done by a qualified technician.

• Make sure that the mounting location has sufficient strength.

• Read the mounting instructions provided with the frame carefully before starting assembly.

• There are restrictions on the usage and installation conditions of the frame. For details, please consult the

salesperson from whom you purchased the frame.

• The legs of the projector also serve as the frame legs.

655

(25-25/32˝)

907337

(35-23/32˝)(13-9/32˝)

(2-7/16˝)