S PEC F ILE
Zoom Lens
This zoom lens is designed for use with Panasonic’s a pplicable projectors. The lens makes it possible to vary the
projection distance by changing the focal distance.
NOTE: Please use the lens only on t he specified Panasonic projector.
Specifications
F value: 2.5–2.7
Focal distance (f): 154–289 mm
Throw ratio: 7.3–13.8:1 for PT-DZ21K/DZ8700/DZ110X (16:10 aspect ratio),
7.9–15.0:1 for PT-DS20K/DS8500/DS100X (4:3 aspect ratio),
8.2–15.4:1 for PT-DW17K/DW8300/DW90X (16:9 aspect atio)
Dimensions (W × H × D): 150 × 150 × 404 mm (5-29/32 × 5-29/32 × 15-29/32 inches)
Weight: Approximately 8.5 kg* (18.7 lbs*)
Applicable projector
The throw ratio is an approximate value calculated by dividing the screen width by the projection distance.
[Group A]
PT-DZ21K/DZ21K2/DS20K/DS20K2/DW17K/DW17K2/DZ16K/DZ16K2
[Group B]
PT-DZ13K/DS12K/DW11K/DZ10K/DZ8700/DZ110K/DS8500/DS1100K/DW8300/DW90K
[Group C]
PT-RZ12K/RS11K
PT-RQ13K
*Average value. May differ depending on the actual unit.
ET-D75LE8
Dimensions
∅150 (5-29/32)
404 (15-29/32)
NOTE: Please read the projector’s instruction manual for throw distances.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of December 2015
SFD10A007-3
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
1/2
S PEC F ILE
Zoom Lens
[Group A]
[Group B]
254
(10)
ET-D75LE8
730
(28-7/ 8)
254
(10)
[Group C]
254
(10)
NOTE: Please read the projector’s instruction manual for throw distances.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
540
(21-1/4)
(28-17/32)
725
NOTE: This illustration is not drawn to scale.
unit : mm (inch)
SFD10A007-3
2/2As of December 2015