Panasonic ET-D3LET30 Instructions
Operating Instructions
ET-D3LEW10
ET-D3LET40
Zoom Lens
Model No.
ET-D3LET30
ET-D3LET40
Commercial Use
ET-D3LEW10
ET-D3LET30
ENGLISH
Thank you for purchasing this Panasonic product.
To ensure correct use of this lens, please read the operating instructions supplied
■
with the lens and the projector carefully.
Before using this product, be sure to read “Read this rst!” (
■
Please save this manual for future use.
■
Page 3).
DPQX1300ZB/X1
█ Contents
Read this rst! ......................................................................................3
Before Use.............................................................................................4
Preparation............................................................................................5
Before replacing the projection lens ........................................................ 5
Attaching and Detaching the Lens .......................................................... 5
Peripheral focus adjustment function (ET-D3LEW10) ............................. 6
Lens calibration ....................................................................................... 7
Projection relationships.......................................................................8
Lens shift ranges ..................................................................................9
Specications .....................................................................................10
Dimensions .........................................................................................10
Projected image size and Projection distance.......Appendix / Annexe /
The "Appendix" can be found after the Japanese language section (
日本語
).
付録
1
2-ENGLISH
Read this rst!
Always follow these precautions
WARNING:
Do not look at or place your skin into the light emitted from the lens while the
projector is being used.
Doing so can cause burns or loss of sight.
zStrong light is emitted from the projector’s lens. Do not look at or place your hands
directly into this light.
zTurn off the power when moving away from the projection lens or projector.
Do not project an image with the lens cover attached.
zDoing so can cause re.
CAUTION:
Before replacing the projection lens, be sure to turn off the power and
disconnect the power plug from the wall outlet.
zUnexpected projection of light may cause injury to eyes.
zReplacing the projection lens without removing the power plug may result in electric
shock.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
zStrong light is emitted from the projector’s lens.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause re, damage to the object, or malfunction of the lens and
projector.
zStrong light is emitted from the projector’s lens.
Do not open the desiccant bag. Do not eat the contents.
Inadvertently ingesting desiccant could be harmful.
zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water
and seek medical attention.
zKeep desiccant out of the reach of children.
WARNING (North America)
A projector would become Class IIIb laser product when this lens is used under the
condition that throw ratio is greater than 3.0, and if used without lens hood. If you use
under this condition, you must receive variance approval letter from FDA before usage.
Class IIIb levels of laser radiation are considered to be an acute hazard to the skin and
eyes from direct radiation.
Note
zThe lens hood needs to be mounted to the projector when this lens is used under the
condition that throw ratio is greater than 3.0 in the North America region. Always ask a
qualied technician or your dealer to mount the lens hood.
For the assembly and attachment, refer to the separate document “Mounting the lens hood”.
The components and document of the lens hood may not be supplied depending on the
country or region where you purchased the product.
ENGLISH-3
Before Use
This zoom lens is a projection lens equipped with an EEPROM*1 and stepping motor.
*1 EEPROM: Electrically erasable programmable read-only memory
■Supported projectors
PT-RQ32K / PT-RZ31K / PT-RS30K / PT-RQ22K / PT-RZ21K / PT-RS20K
Note
zSome of the alphabet letters at the end of projector model numbers may be omitted in this
manual.
zModels other than the above may also be supported. Refer to the operating instructions for
your projector or the Panasonic website (https://panasonic.net/cns/projector/).
z If the projector you are using is PT-RQ32K / PT-RZ31K / PT-RS30K / PT-RZ21K /
PT-RS20K, you may not be able to use the projection lens depending on main version of
the rmware. If main version of the rmware is the version number shown below, update to
the latest rmware before use.
- PT-RQ32K / PT-RZ31K / PT-RS30K: Earlier than 3.00
- PT-RZ21K / PT-RS20K: Earlier than 2.00
For details on the update procedure, refer to the latest rmware information on the
Panasonic website (https://panasonic.net/cns/projector/pass/).
zThe main version of the rmware can be checked in the [STATUS] screen.
■Supplied Accessories
Make sure that the following has been provided.
Part name Appearance
zThe product is delivered
with a lens cover attached.
Lens cover
zThe shape and size of the
lens caps are different for
each product.
1 each for front and rear
4-ENGLISH
Loading...