Panasonic dmw-mcft3 Operation Manual

Instrucciones de funci ona miento

Model No.

No de modèle

型号

Operating Instructions

Manuel d’utilisation

Bedienungsanleitung

Istruzioni d’uso

使用說明書

使用说明书

Инструкция по эксплуатации

Marine Case Boîtier marin

防水盒

DMW-MCFT3

Before connecting, operating or adjusting this product, please read the

instructions completely.

Avant de raccorder, régler ou utiliser l’appareil, il est recommandé de lire

attentivement le manuel d’utilisation.

Bitte lesen Sie diese Bedienungsanleitung vor der Inbetriebnahme des

Gerätes vollständig durch.

Antes del uso, lea completamente estas instrucciones.

Leggere completamente queste istruzioni prima dell’uso.

使用前，請完整閱讀本說明書。

Перед пользованием прочтите, пожалуйста, эту инструкцию полностью.

使用前，请完整阅读本说明书。

VQT3M30-1

Contents

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Handling and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

What is the O-ring?. . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Preparation -Setting the O-ring- . . . . . . . . . . . . . . . . . 10

Preparation -Checking the Case is Waterproof-. . . . . 14

Preparation -Attaching the Digital Camera- . . . . . . . .15

Taking Pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Tips for Taking Pictures in the Water . . . . . . . . . . . . . 19

After Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Cleaning and Storing . . . . . . . . . . . . . . . . . . . . . . . . .21

Caution for Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

VQT3M30

ENGLISH

Before Use

≥ This Marine Case is designed for a Panasonic Digital Camera.

You can enjoy taking pictures underwater at depths up to 40 m/ 130 feet.

≥ In the case of water leakage due to insufficient care, Panasonic is in no

way liable for dam ag e to any products (di gi tal cam er a, batteries, card e tc. ) inside this Case, photography costs or any other expenses.

≥ Panasonic also offers no compensation for accidents resulting in injury or

damage to property.

≥ Read the operating instructions for your digital camera. ≥ Before attaching the digital camera, submerge the case in water for

about 3 minutes or more to check that there is no water leakage.

∫ About handling this Case

≥ Use under the following conditions.

• Water depth: Up to 40 m/130 feet to

• Amb ient temperatu re: 0 °C

40 °C/32 °F

≥ Do not use the Case in water over 40 °C/104 °F. The heat may damage the Case or

cause water leakage.

≥ The Case is made of impact resistant polycarbonate however be careful when you

are using it. It can be easily scratched when taking pictures in rocky places etc. and can be damaged by the impact if dropped etc. When travelling, pack the Case carefully to prevent any direct impact if it is dropped etc. and do not leave the digital camera in the Case. Only attach the digital camera to the case if you are transporting it a short distance such as from the airport to the diving spot. (You cannot reuse the material the Case was packed in at the time of purchase to transport it.)

≥ When boarding a plane, the change in atmospheric pressure may cause the inside

of the Case to expand causing damage to the Case. Remove the O-ring before boarding a plane. Insert the removed O-ring into the supplied exclusive polyester bag.

≥ Do not leave the digital camera in the Case for a long period of time in a car, a

ship, exposed to direct sunlight etc. The Case is an airtight device so the temperature inside the Case will become very high and the digital camera may stop operating properly. Do not let the temperature inside the Case become too high.

104 °F

VQT3M30

Before Use (continued)

∫ Using the Case in high or low temperatures

≥ If you open or close the Case where it is humid or hot and then move to a place that

is cold or dive underwater, condensation may appear inside the Case, the glass surface may become cloudy and the digital camera may be damaged.

≥ If you suddenly move the Case from a cold place or cold water to a warm place, the

glass surface may become cloudy. Wait until the Case becomes close to the air temperature before taking pictures.

∫ About preparation

≥ Do not open or close the Case where it may be splashed by water or sand may

get in it. We recommend opening or closing the Case indoors.

≥ Replace the battery, card etc. and attach the digital camera indoors where there is

little moisture.

≥ If you must open or close the Case at the diving spot to replace the battery or

the card, be sure to follow the steps below.

• Select a p lace where the Case w ill not be splashed by water and sand will not get

in it.

• Blow off any drops of water in the gap between the rear case and the front case

and on the buckle. Thoroughly wipe off any remaining drops of water with a dry cloth.

• Tho roughly wipe off any drops of water on your body or hair.

• Be par ticularly careful about any water coming from the sleeves of your thermal

suit.

• Do not touch the digital camera if your hands are wet from sea water. Wet a towel

with fresh water and place it in a polyester bag beforehand. Use this towel to wipe off any drops of water or sand on your hands or body.

≥ This Case does not absorb shock. If you place a heavy object on the Case or cause

shock to it, the digital camera may be damaged. Be careful when you are using the case.

VQT3M30

Accessories

≥ You can remove this diffuser when not using it

Removing Attaching

Align with the mark on the back of the case and attach.

When you first open the package, check that the Case and all the accessories are inc luded an d that th ere has been no d ama ge to the Case or any of the accessories during distribution or transportation. If you find something unusual, consult your dealer before using the Case. Do not use any accessories except those specified below.

Replacement O-ring VMG1798 * In exclusive

polyester bag

* One has been

attached to the unit in advance.

Grease (for O-ring) VZG0372

Diffuser/String VYK3E56

Silica Gel (Desiccant) (1 g/5 pieces) VZG0371

Hand Strap VFC4190

VQT3M30

Handling and Care

≥ Do not place the Case where it may fall.

• If the Case falls on your head or foot, it will injure you and cause the Case to malfunction.

≥ Never alter the Case.

• If water leaks into the digital camera because the Case was altered, the digital camera may be damaged beyond repair.

• If you continue to use the digital camera after water has leaked into it, this may cause a fire.

≥ Do not use the Case while scuba diving without proper training.

• You should only operate the Case while scuba diving if you have been properly trained and certified for this sport.

≥ Never place the Case, grease, silica gel or O-ring within the reach of

infants.

• If any part of an infant’s body is caught in the Case, it may cause an injury.

• Infants may accidentally swallow the grease, silica gel or O-ring.

• Consult a doctor immediately if you think an infant may have swallowed the grease, silica gel or O-ring.

≥ Do not hang the strap around your neck underwater.

• It may become wound around your neck causing suffocation or other serious injuries.

≥ Thoroughly wash any grease on your hands.

• Do not allow the grease on your hands to come into contact with your mouth or eyes.

≥ If water leaks into the case, stop using it immediately.

• This may cause an electric shock, burning or a fire.

• Consult your dealer.

≥ If anything abnormal occur s while using the Case u nderwater, plea se

follow all necessary procedures and guidelines for decompressing when you ascend.

• If you ascend too quickly, you may get caisson disease.

≥ If smoke or abnormal heat, smells or sounds come from the Case,

stop using it immediately.

• These may cause an electric shock, burning or fire.

• Remove the digital camera from the Case and then imm ediately remove the battery from the digital camera.

• Consult your dealer.

≥ Be careful when opening the Case after water leak age.

• The leaked water may blow out or the rear case may flip.

VQT3M30

≥ Do not leave the Case where the temperature is high.

• The temperature inside the Case becomes very high particularly when it is exposed to direct sunlight on a beach, a ship etc. or when it is left in an airtight car in the summer. The heat may damage the Case or its inner part s.

• If a digital camera is attached to the Case, it may also be damaged.

• If you use the attached digital camera when the temperature inside the Case is very high, it may cause leakage, short-circuiting or insulation failure resulting in fire or malfunction.

≥ Do not handle the digital camera or the batter y with wet hands.

• This may cause an electric shock or malfunction.

∫ When taking pictures with the flash

≥ When taking pictures with the flash, the corners of the picture may be vignetted or

the picture may not be lit evenly.

≥ When taking pictures with the flash, the available flash range is less underwater

than on land.

VQT3M30

Components

1. Shutter Button

2. Motion Picture Button

3. Camera OFF/ON button

4. Mounting shoe for INON Inc., external strobe

¢1

5. Front Case

6. Diffuser (supplied)

7. Front Glass

8. Zoom Button

9. Button operation section (Read the operating instructions of the digital camera for details about each button operation.)

10. Rear Case

11. Buckle

12. Lock Release Leve r

13. Strap Eyelet

(for attaching the supplied hand strap and diffuser)

324

12 13

¢1 This is a mounting shoe dedicated for an external strobe manufactured by

INON Inc. Please refer to INON Inc. regarding compatible strobe. http://www.inon.co.jp/INON_WORLD_body.html

VQT3M30

What is the O-ring?

O-ring

Digital Camera

Front Case

Rear Case

O-ring

≥ The O-ring is a waterproofing packing used for underwater cameras, watches and

diving equipment.

≥ The O-ring keeps the Case waterproof by sealing the gap between the rear case

and the front case.

∫ How the O-ring keeps the Case waterproof

The gum comes into contact with the sides of the Case making the Case waterproof and stopping water from entering from the gap.

When water pressure acts on the O-ring, the surface of the O-ring expands and the Case is sealed more tightly.

The O-ring prevents water leakage by coming into uniform contact with the sides of the Case. Theref ore, good care of the O-ring is very important. Incorrect care of the O-ring may cause water leakage.

VQT3M30

Preparation -Setting the O-ring-

O-ring

Be sure to set the O-ring before attaching a digital camera. Thoroughly wash and dry your hands before handling the O-ring. Place

the O-ring where there is no sa nd or dust.

1 Loosen the O-ring with your fingers to remove it.

≥

Loosen part of the O-ring with the tips of two fingers and then lift the loosened part. Be careful not to scratch the O-ring with your fingernails.

∫ Note

Do not use a pointed object to remove the O-ring. This may scratch or damage the

≥

O-ring.

VQT3M30

2 Check the O-ring.

3Dirt

3Sand

3Hair

3Dust 3Salt

crystals

3Lint

3Ripped

3Twisted

Squashed

3Frayed 3

Scratched

3Sand

≥

Check that there is no dirt, sand, hair, dust, salt crystals, lint or grease on the O-ring. If you find any of these, remove them with a soft, dry cloth.

≥ There may be dirt on the O-ring that you cannot see. Check if there is any dirt by

rubbing your finger over the O-ring.

≥ Be careful not to leave any fibers from the dry cloth on the O-ring when wiping it. ≥ Check that the O-ring is not ripped, twisted, squashed, frayed or scratched and

that there is no sand sticking to it. Replace the O-ring in thes e cases.

3 Inspect the O-ring groove.

≥ Grains of sand or hardened salt crystals may get into the O-ring groove.

Remove them carefully with an air spray or a cotton swab. If you use a cotton swab, be careful not to leave any fibers from it in the O-ring groove.

≥ Inspect the front case groove as well as the rear case (side where O-ring is set)

groove.

VQT3M30

Preparation -Setting the O-ring- (continued)

CORRECT

INCORRECT

Apply the grease (supplied).

Apply O-ring grease to clean the surface of the O-ring and replenish the oil.

≥ Apply a rice-grain size of grease (supplied) evenly to the O-ring with the tip of

your finger. (Do not apply the grease with paper or a cloth. The fibers from the paper or cloth may stick to the O-ring.)

≥ If there is too much grease on the O-ring, dirt and dust will stick to it causing

water to leak in. Therefore, hold the O-ring between the balls of your finger and thumb and gently remove excess grease.

≥ By applying the O-ring grease thinly and evenly, the O-ring fits flexibly to the

groove of the marine case and keeps it airtight.

≥ Use only the specified grease. If you use other types of grease, the

surface of the O-ring may be damaged causing water leakage.

5 Fit the O-ring evenly into the O-ring groove.

Check the following:

≥ There is no dirt sticking to the O-ring. ≥ The O-ring has not come out. ≥ The O-ring is not twisted. ≥ The O-ring is not stretched too much.

VQT3M30

6 Inspect the O-ring one last time.

Check the following one more time:

≥ There is no dirt sticking to the O-ring. ≥ The O-ring has not come out. ≥ The O-ring is not twisted. ≥ There are no scratches or squashed parts on the O-ring.

Thoroughly w ipe a n y g reas e o ff your hands with a dry cloth. Afterwards wash thoroughly with fresh water.

7 Close the buckle.

≥

Check that no foreign materials are sticking to the outer surface of the O-ring or the buckle on the front case and then close the Case.

∫ Notes

To keep the Case completely airtight, do not scratch the surface of the O-ring that

≥

comes into contact with the sides of the Case.

≥ Never use an O-ring that has been scratched or damaged by dirt etc. This will cause

water leakage.

≥ Each time you use the Case, remove the O-ring and check that there is no dirt,

sand, hair or other foreign materials in the O-ring groove and then apply a thin coat of grease (supplied). If you apply too much grease, dirt and the dust may stick to the O-ring causing water leakage.

≥ Be sure to bring a spare O-ring in case the O-ring that you are using becomes

damaged or scratched.

VQT3M30

Preparation -Checking the Case is Waterproof-

After setting the O-ring, check that no water leaks into the Case by submerging it in a water tank, bath tub etc. for more than about 3 minutes before attaching a digital camera.

Do not use the Case in water over 40 °C/104 °F. The heat may damage the Case or

≥

cause water leakage.

‘ Carry out the same test after attaching the digital camera to the Case. (P15) ∫ Notes

≥

If bubbles rise from the Case when it is submerged in water or there is water inside the Case when you take it out of the water, there is water leakage. In these cases, consult your dealer.

≥ If water leaks into the Case while you are using it and the digital camera is

submerged in water, remove the battery immediately. Hydrogen gas can cause burning or explosion if there is a fire nearby.

≥ If you dive quickly while holding the Case or throw the Case from a ship into the sea,

some water leakage may occur because of high pressure. This is not a malfunction of the Case. Always dive slowly into the water.

≥ The Case is designed to be used at a depth of up to 40 m/130 feet. If you dive

deeper than 40 m/130 feet, part of the Case may be damaged beyond repair.

≥ When closing the Case, be careful that no foreign materials get caught between the

O-ring and the O-ring groove. Even one s trand of hair or one grain of sand can cause water leakage.

VQT3M30

Preparation -Attaching the Digital Camera-

Front Case

Silica gel

Digital Camera

Read the notes on page 17 before attach ing the digital camera. Check that the digital camera is set to [OFF].

Remove the strap and silicon jacke t from the digital camera.

≥

1 Push 2 up with your finger while sliding 1 to open the buckle.

2 Attach the digital camera to the Case.

Be careful of the direction and insert the digi tal camera into t he Case as shown in the illustration.

Check that there is no remaining water inside the digital camera and the Case.

≥ ≥ Be careful not to catch the shading hood 1.

3 Insert the silica gel (supplied).

≥

Always use new silica gel.

VQT3M30

Preparation -Attaching the Digital Camera- (continued)

Silica gel

≥ When inserting the silica gel, bend it as shown in the illustration below

and then insert it as far as possible. If you close the Case wi th the silica gel not fully inserted, the silica gel will get caught in the O-ring causing water leakage.

≥ If the air temperature is high and the water temperature is low, condensation

may appear inside the Case. To prevent condensation, insert silica gel (supplied) inside the Case in advance. To prevent the Case from becoming fogged up, in sert the silica gel about 1 to 2 hours before using the Case.

4 Close the buckle.

‘

Check that the buckle is closed firmly. Do not insert the strap etc. in the buckle.

5 After you have attached the digital camera, check one more time that

no water leaks into the Case. (P14)

VQT3M30

∫ Notes

Be careful not to get the shading hood dirty with fingerprints etc.

≥ ≥ Check one more time that the O-ring is fitted evenly into the O-ring groove. ≥ Avoid opening or closing the Case where there is a lot of sand or dust and in humid

or wet places.

≥ If there is a sudden change of humidity caused by moist air entering the Case,

condensation may appear inside the Case.

≥ To prevent condensation, set the digital camera in as dry a place as possible. Also,

check that the silica gel (supplied) is sufficiently dry before inserting.

≥ If sunscreen or suntan oil sticks to the Case, wash it off immediately with lukewarm

water to prevent reduced waterproofness or discoloration.

≥

Submerge in fresh water for approximately 10 minutes after using the digital camera at the beach or in water. Read the operating instructions for details.

≥

If there are any drops of water or dirt on the camera unit, wipe off using a dry cloth before standing the unit upright on a dry cloth for a while and checking that the water has been removed. After this, please attach the camera.

When a digital camera with GPS function, compass, altimeter (depth meter), and barometer is attached to the marine case, positioning or measurements may not be possible, or may contain major errors.

VQT3M30

Taking Pictures

∫ Be sure to check the following before entering the water Check the following before diving.

≥

Is there sufficient remaining battery power?

≥ Is there sufficient memory in the card? ≥ Is the O-ring fitted evenly into the O-ring groove? ≥ Have you checked that no water leaks into the Case? ≥ Is the buckle closed firmly?

∫ Taking pictures

1 Press the OFF/ON button and turn on the digital camera. 2 Set [Underwater].

≥

Read the operating instructions of the digital camera for details.

3 Aim the AF area on the LCD monitor at the subject y ou want to f ocus

on.

4 Press [AF-L ] to focus.

• Pres s [AF-L ] again to cancel.

5 Press the shutter button fully to take the picture.

∫ Notes ≥ Before attaching the camera to the Case, we recommend setting the clock again.

(Read the operating instructions of the digital camera for details. )

≥ If there are any particles floating in front of the camera, it may focus on them instead

of the subject.

≥ If there are drops of water or dirt sticking to the front glass, you may not be able to

focus properly. Be sure to wipe the front glass before taking pictures.

VQT3M30

Tips for Taking Pictures in the Wate r

When the image is too bluish in the water

Select [White Balance] from the [Rec] Mode menu.

2 Press [DISP.] to display [WB Adjust.]. 3 Press [AF-L ]/[ ] to adjust the white balance. 4 Press [MENU/SET] to finish .

≥ You can also press the shutter button halfway to finish.

Select the best picture

Set the flash to [ ].

Using the Auto Bracket Function (For models with an Auto Bracket Function)

≥ Each time the shutter button is pressed, 3 pictures with different exposures are

automatically recorded. You can select the desired picture from the 3 pictures.

Use Burst Mode

≥ When taking pictures of a fast-moving subject (a fish etc.), you can select your

fav ourite picture after taking the pictures using Burst Mode.

∫ Note ≥

WB fine adjustment (Underwater Mode) is also supported when recording motion pictures. The white balance can be adjusted according to water depth or preference.

≥ For more information, read the operating instructions of the digital camera.

VQT3M30

After Use

After you have finished taking pictures, follow the steps below.

1 Submerge the Case in fresh water for about 30 minutes or more

without removing the digital camera to remove any salt crystals etc.

Press all the operation buttons etc. on the Case to wash away any

≥

seawater. If the salt crystals are not removed from the buttons etc., they will harden an d the buttons will become inope r a ble.

≥ Do not wash the Case with fast-running or pressurized water etc. as it may

cause water leakage.

2 Wipe the water with a dry cloth that has no sal t crystals sti ck ing to it

and then dry the Case completely.

Do not dry the Case by exposing it to direct sunlight. This may

≥

damage the Case or may hasten deterioration of the O-ring.

discolor

3 Open the rear of the case to remove the digital camera.

After thoroughly wiping your hands, apply your finger as shown in the illustration and take out the digital camera.

VQT3M30

4 Remove the O-ring from the Case and check that there is no di rt etc.

in the O-ring groove .

5 Check that there are no scratches etc. on the O-ring while you are

applying the grease.

∫ Notes Be careful of the following points when taking out the digital camera.

≥ Remove the camera with clean hands. (Wash your hands with fresh water and then

thoroughly dry them.)

≥ Thoroughly dry any moisture on your body or hair. (Be particularly careful about any

water coming from the sleeves of your thermal suit.)

Cleaning and Storing

Wash the outside of the Case with water.

≥

Wash the outside of the Case until it is clean. (P20)

≥ Confirm that the O-ring is set securely, be sure to close the Case, and then

wash only the outside with water.

≥ Wipe off any dirt inside the Case with a wet, soft cloth.

∫ Notes

Do not wash the Case with high-pressure water as it may cause water leakage.

≥

Remove the digital camera before wa shing the Case with water.

≥ Do not leave the digital camera inside the Case when storing it. ≥ Detach the O-ring from the marine case and store so it will not dry. For details,

please read page 22. When storing for a long period of time, insert in the supplied exclusive poly ester bag after first removing the O-ring.

Caution for Use

∫ Handling of the O-ring

≥

Do not use alcohol, thinner or a chemical cleaning agent for cleaning the O-ring. This will cause damage to, or deterioration of, the O-rin g.

≥ If you will not be using the Case for a long period of time, remove the O-ring

from the O-ring groove, apply a thin coat of grease (su p plied), place it in exclusive polyester bag and then store it in a cool, dark place to prevent the surface from being damaged. When you use the O-ring again, thoroughly check that it is not scratched, damaged or split.

VQT3M30

Caution for Use (continued)

≥ Use only the specified grease. If you use other types of grease, the surface of

the O-ring may be damaged causing water leakage.

≥ The O-ring comes into contact with the sides of the Case making the Case

waterproof. Do not knock, insert foreign materials (dirt, sand, hair etc.) or scratch the O-ring or sides of the Case.

≥ Use the tips of your fingers to remove the O-ring. Do not use a pointed object as it

may scratch or damage the O-ring.

≥ After removing the O-ring from the rear case, wipe off any dirt, sand, hair or other

foreign materials on it. Also wipe the O-ring groove and the inner sides of the front case which come into contact with the O-ring.

≥ Never use an O-ring that has been scratched or damaged by dirt etc. This will cause

water leakage. Replace it with a new O-ring.

≥ After replacing the O-ring, when not in use for a long period of time, after attaching

the digital camera or when replacing the battery, if the marine case is opened please thoroughly check the O-ring for damage or any cracks. After checking, shut the marine case, immerse in water (a water tank or a bath tub) for approximately 3 minutes or more, then check that there are no water leaks. (P14)

≥ O-rings are consumable products. Although the lifespan of O-rings will depend on

how well they are maintained, how often they are used and their storage conditions, we recommend replacing them every year even if you cannot see any scratches.

∫ About maintenance

≥ Do not use the chemicals shown below for cleaning, rustproofing, defogging

or repair. Using t hem directly or indirectly (with a chemical spray etc.) on the Case may cause it to crack.

Prohibited chemicals Cautions

Volati le organic solvents/ Chemical cleansers

Anti-corrosives

Anticlouding agents

Adhesives

≥ If grease sticks to the digital camera, wipe it off with a soft, dry cloth. ≥ When wiping the inside of the Case, only use a soft, dry cloth. Wipe the inside of the

front glass with a soft, dry cloth before and after use to keep t he glass clear.

Do not clean the Case with volatile organic solvents such as alcohol, gasoline or thinner or with chemical cleansers. Clean it with fresh water or lukew arm water.

Do not use anti-corrosives as the metal parts of the Case are made from stainless steel or brass. Clean it with fresh water.

Do not use commercially available anticlouding agents. Be sure to use the silica gel indicated in these operating instructions.

Do not use adhesives for repair. If the Case needs to be repaired, consult your dealer.

VQT3M30

∫ About storage and inspection after use

≥ Always take the digital camera out of the Case. ≥ Make sure that no dirt or dust is stuck to the O-ring. ≥ Thoroughly dry the Case at room temperature and then store it in a cool, dark place. ≥ We recommend that the Case be inspected about 3 years after purchase. This

inspection involves dismantling and cleaning the Case, inspecting all the parts and repairing them if necessary and checking the waterproofness of the Case using the same hydrostatic test equipment that was used to check the waterproofness before purchase. The customer is responsible for all transportation costs.

≥ Do not dismantle any parts or use any accessories not specified in these operating

instructions and do not alter the Case. If the Case does not work properly, consult your dealer.

Specifications

Compatible model: DMC-FT3/DMC-TS3 (As of January 2011¢) Dimensions: Approx. 145 mm (W)k94 mm (H)k52 mm (D)

Mass (Weight): Approx. 356 g/0.785 lb (including the diffuser) Material: Polycarbonate Waterproof construction: O-ring sealing Water resistant depth: 40 m/130 feet

¢ Refer to the operating instructions, catalogue, website etc. of the digital

camera for the latest information on models that can be used.

[5.71q (W)k3.70q (H)k2.05q (D)] (excluding the projecting parts)

Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario, L4W 2T3  Panasonic Corporation 2011

Printed in Japan

VQT3M30

Table des matières

Avant utilisation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Accessoires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Manipulation et entretien. . . . . . . . . . . . . . . . . . . . . . . 28

Composants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Qu’est-ce qu’un joint torique?. . . . . . . . . . . . . . . . . . . 31

Préparatifs -Mise en place du joint torique- . . . . . . . .32

Préparatifs Préparatifs -Mise en place de l’appareil photo

numérique- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Prises de vues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Conseils pour la prise de vue dans l’eau . . . . . . . . . .41

Après utilisation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Nettoyage et rangement . . . . . . . . . . . . . . . . . . . . . . .44

Mises en garde . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Spécifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

-Vérification de l’étanchéité du boîtier-

. . .36

VQT3M30

FRANÇAIS

Avant utilisation

≥ Ce boîtier marin est conçu pour un appareil photo numérique Panasonic.

Vous pouvez prendre des photos sous l’eau à une profondeur allant jusqu’à 40 m/130 pieds.

≥ Dans le cas d’une infiltration d’eau provoquée par un manque de précautions,

Panasonic n’est responsable en aucune manière des dommages subis par les produits (appareil photo numérique, batteries, carte, etc.) présents à l’intérieur du boîtier, du coût des photographies ou de toutes autres dépenses.

≥ Panasonic n’offre aucune compensation pour les accidents provoquant des

blessures ou des dommages.

≥ Veuillez lire le manuel d’utilisation de l’appareil photo numérique. ≥ Avant d’installer l’appa reil photo numérique, immergez le boîtier dans l’eau

pendant environ 3 minutes ou plus pour vérifier son étanc héité.

∫ Manipulation du boîtier

≥

Utilisation dans les conditions suivantes:

• Profondeur de l’eau: jusqu’à 40 m/130 pieds

• Température ambiante: 0 °C à 40 °C/32 °F à 104 °F

≥ N’utilisez pas le boîtier dans une eau de plus de 40 °C/104 °F. La chaleur peut

l’endommager et causer des infiltrations d’eau.

≥ Le boîtier est fait de polycarbonate résistant au choc; toutefois faites attention en

l’utilisant. Il peut être facilement éraflé si vous prenez des photos dans des endroits rocheux, etc. et peut être endommagé par le choc s’il venait à tomber, etc. Pour voyager, emballez soigneusement le boîtier afin d’éviter les chocs en cas de chute, etc. et ne laissez pas l’appareil photo dans le boîtier. Installez l’appareil photo numérique dans le boîtier uniquement si vous le transportez sur une courte distance comme de l’aéroport vers le point de plongée. (Vous ne pouvez pas réutiliser le matériau avec lequel le boîtier a été emballé au moment de l’achat en vue du transport.)

≥ Lorsque vous embarquez dans un avion, le changement de pression

atmosphérique peut causer une poussée à l’intérieur du boîtier qui risque de l’endommager. Retirez le joint torique avant d’embarquer dans un avion. Une fois retiré, rangez le joint torique dans le s ac de ra ngement en polyester exclusif fourni.

≥ Ne laissez pas l’appareil photo numérique dans le boîtier pendant un long

moment dans une voiture, un bateau, expos é di r e c tement aux rayons du soleil, etc. Le boîtie r est un a ppa r e il hermétique, donc sa température intérieure peut devenir très élevée et l’appareil photo numérique peut arrêter de fonctionner correctement. Ne laissez pas la température intérieure du boîtier devenir trop élevée.

VQT3M30

Avant utilisation (suite)

∫ Utilisation du boîtier à haute ou à basse

température

≥

Si vous ouvrez ou fermez le boîtier dans un endroit chaud et humide, puis que vous vous déplacez vers un endroit froid ou que vous plongez sous l’eau, de la condensation peut apparaître à l’intérieur du boîtier, la surface du verre peut s’embuer et l’appareil photo peut être endommagé.

≥ Si vous déplacez soudainement le boîtier d’un endroit où la température de l’air ou

de l’eau est froide vers un endroit où la température est chaude, la surface du verre peut s’embuer. Attendez jusqu’à ce que la température du boîtier soit proche de la température ambiante avant de prendre des photos.

∫ Préparatifs

≥ N’ouvrez pas et ne ferme z pas le boîtier dans un endroit où il pourrait être

éclaboussé par de l’eau ou dans un endroit où le sable pourrait y entrer . Nous vous conseillons d’ouvrir et de fermer le boîtier à l’intérieur.

≥

Remplacez la batterie, la carte, etc. et installez l’appareil photo numérique à l’intérieur dans un endroit peu humide.

≥ Si vous devez ouvrir ou fermer le boîtier au point de plongée pour remplacer

la batterie ou la carte, veillez à suivre les étapes suivantes.

• Choisisse z un endroit où le boîtier ne sera pas éclaboussé par de l’eau et où le sable ne pourra pas y pénétrer.

• Enlevez toutes les gouttes d’eau présentes entre le côté avant et arrière du boîtier et sur le loquet de verrouillage en soufflant. Enlevez complètement les gouttes d’eau restantes avec un chiffon sec.

• Ess uyez complètement toutes les gouttes d’eau de votre corps ou vos cheveux.

• Soyez particulièrement attentif à l’eau qui a pénétré dans votre combinaison de plongée par les manches.

• Ne t ouchez pas l’appareil photo numérique en présence d’eau de mer sur vos mains. Mouillez une serviette avec de l’eau douce et mettez-la à l’avance dans un sac en polyester. Utilisez cette serviette pour essuyer les gouttes d’eau et le sable présents sur vos mains ou votre corps.

≥ Ce boîtier n’absorbe pas les chocs. Si vous placez un objet lourd sur le boîtier ou si

vous le cognez, l’appareil photo peut être endommagé. Faites attention lorsque vous utilisez le boîtier.

VQT3M30

Accessoires

≥ Vous pouvez retirer le diffuseur lorsque vous ne l’utilisez pas.

Retirez Fixez

Alignez-le avec les repères à l’arrière du boîtier et fixez-le.

Lorsque vous ouvrez l’emballage pour la première fois, vérifiez bien qu’il contient le boîtier et tous les accessoires et que ceux-ci n’ont pas été endommagés lors du transport. Si vous constatez quelque chose d’anormal, consultez votre revendeur avant d’utiliser le boîtier . N’utilisez aucun autre accessoire que ceux indiqué s ci-des sou s.

Joint torique de remplacement VMG1798

Dans le sac de rangement en polyester exclusif

Un joint a été fixé au préalable s ur le boîti er .

Tube de graisse (pour joint torique)

VZG0372

Diffuseur/Cordelette VYK3E56

Gel de silice (dessiccatif) (1 g/5 pièces) VZG0371

Dragonne VFC4190

VQT3M30

Manipulation et entretien

≥ Ne placez pas le boîtier dans un endroit où il pourrait tomber.

• Si le boîtier tombe sur votre tête ou votre pied, il vous blessera et pourra mal fonctionner.

≥ Ne modifiez jamais le boîtier.

• Si de l’eau s’introduit dans l’appareil photo num ér ique parce que le boîtier est abîmé, celui-ci peut être endommagé de façon irrémédiable.

• Si vous continuez d’utiliser l’appareil photo après que l’eau s’y soit infiltrée, il peut prendre feu.

≥ N’utilisez pas le boîtier en plongée sous-marine sans un

entraînement adéquat.

• V ous ne devez utiliser ce boîtier lors d’une plongée sous-marine que si vous avez été correctement entraîné et êtes qualifié pour ce sport.

≥ Ne placez jamais le boîtier, la graisse, le gel de silice ou le joint

torique à la portée des enfants.

• Si un enfant se coince une partie du corps dans ce boîtier, cela peut provoquer une blessure.

• Les enfants peuvent accidentellement av aler la graisse, le gel de silice ou le joint torique.

• Consultez immédiatement votre médecin si vous pensez que v otre enfant a avalé de la graisse, du gel de silice ou le joint tor ique.

≥ N’enroulez pas la bandoulière autour de votre cou lorsque vous êtes

sous l’eau.

• Cela peut vous blesser le cou et causer une suffocation ou d’autres blessures sérieuses.

≥ Nettoyez toutes traces de graisse de vos mains.

• Ne laissez pas la graisse de vos mains entrer en contact avec vos yeux ou votre bouche.

≥ S’il y a des infiltrations d’eau dans le boîtier, arrêtez immédiatement

de l’utiliser.

• Ceci peut provoquer un choc électrique, une brûlure ou un incendie.

• Consultez votre revendeur.

≥ Si quelque chose d’anormal survient en utilisan t le boîtier sous l’ea u,

veuillez suivre toutes les pr océdures nécessaires et les consignes de décompression lors de votre remontée.

• Si vous remontez trop rapidement, vous pouvez subir la maladie des caissons.

≥ Si de la fumée ou une chaleur, une odeur ou un bruit anormal

provient du boîtier, arrêtez de l’utiliser immédiatem ent.

• Cela peut causer un choc électrique, une brûlure ou un incendie.

• Retirez l’appareil photo numérique du boîtier, puis retirez les batteries de l’appareil photo.

• Consultez votre revendeur.

VQT3M30

≥ Faites attention en ouvrant le boîtier après une infiltration d’eau.

• L’eau qui s’est infiltrée peut sortir ou bien l’arrière du boîtier peut se renverser.

≥ Ne laissez pas le boîtier dans un endroit où la température est éle vée.

• La température à l’intérieur du boîtier peut dev enir très éle v ée surtout lorsqu’il est exposé directement aux rayons du s oleil sur une plage, en bateau, etc. ou lorsqu’il est laissé dans une voiture fermée en plein été. La chaleur peut endommager le boîtier ou ses éléments internes.

• Si un appareil photo numérique se trouve à l’intérieur du boîtier, celui-ci peut également être endommagé.

• Si vous utilisez l’appareil photo numér ique lorsque la température à l’intérieur du boîtier est très élevée, cela peut causer des infiltrations, des courts-circuits ou une panne d’isolation ayant pour résultat un feu ou un mauvais fonctionnement.

≥ Ne manipulez pas l’appareil photo numérique ou la batterie avec les

mains mouillées.

• Cela peut provoquer un choc électrique ou un mauvais fonctionnement.

∫ Prises de vues avec le flash

≥ Lorsque vous utilisez le flash, les angles de l’image peuvent être coupés ou l’image

peut ne pas apparaître illuminée de manière uniforme.

≥ En prenant des photos avec le flash, la portée disponible de celui-ci est plus faible

sous l’eau qu’en plein air.

VQT3M30

Composants

1. Déclencheur

2. Touche d’images animées

3. Touche de mise en/hors marche (OFF/ON)

4. Griffe porte-flash stroboscopique externe de

INON Inc.

¢1

5. Couvercle avant

6. Diffuseur (f ou rni)

7. Verre avant

8. Touche du zoom

9. Touches de fonctionnement (Reportez-vous au manuel d’utilisation de l’appareil photo numérique pour plus de détails sur chaque touche de fonctionnement.)

10. Couvercle arrière

11. Loquet de verrouillage

12. Levier de verrouillage/ déverrouillage

13. Œillet de la dragonne

(pour fixer la dragonne et le

diffuseur fournis)

324

12 13

¢1 Il s’agit d’une griffe porte-flash stroboscopique externe fabriqué par INON Inc.

Veuillez vous enquér ir auprès de INON Inc. concernant le flash stroboscopique externe compatible. http://www.inon.co.jp/INO N_WORLD_body.html

VQT3M30

+ 154 hidden pages