Panasonic CT-36HL43G User Manual

HDTV Monitor Operating Instructions

Monitor HDTV Instrucciones de Operación

Écran à haute définition Manuel d’utilisation

CT-32HL43 CT-36HL43

CT-32HC43 CT-32HXC43 CT-36HC43

TQB2AA0467 30422 PRINTED IN USA IMPRESO EN EE.UU IMPRIMÉ AUX ÉTATS-UNIS

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock do not remove cover or back. No

user-serviceable parts inside. Refer servicing to qualified service personnel.

ENGLISH

The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

The Class II insulation symbol (square within a square) indicates that this product has been evaluated and tested to comply with Class II insulation requirements.

FCC CAUTION:

ANY CHANGES OR MODIFICATIONS TO THIS TV

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

RECEIVER NOT EXPRESSLY APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.

FCC INFORMATION

This equipment has been tested and found to comply with the limit for a Class B Digital Device in accordance with the specifications in Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against radio and television interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause interference to radio or television reception (which you can determine by turning the equipment off and on), try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ENVIRONMENTAL NOTICE:

The Energy Star label, a symbol for energy efficiency, was created by the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) to help customers identify products that can save them money and protect the environment by saving energy. Energy Star compliant products generally consume less energy than similar standard products.

High Definition Sound

THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 4482866,

5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

TABLE OF CONTENTS

Congratulations ...............................................2

Customer Record........................................................ 2

Care and Cleaning...................................................... 2

Specifications.............................................................. 2

Feature Chart.............................................................. 2

Installation........................................................3

Television Location ..................................................... 3

Optional Cable Connections ....................................... 3

AC Power Supply Cord............................................... 3

Cable / Antenna Connection....................................... 3

Important Information .................................................. 3

Initial Set Up Menu...........................................4

Optional Equipment Connections..................5

VCR ............................................................................ 5

Cable Box................................................................... 5

VCR and Cable Box.................................................... 5

Amplifier (TO AUDIO AMP) ........................................ 6

Digital TV - Set-Top Box (DTV-STB) or DVD Players 6

Front Control Panel..................................................... 6

DVI (Digital Visual Interface) input connection ........... 7

Program Out connection............................................. 7

Special Remote Butttons............................................ 7

PIP And Split Operation ..................................8

PIP Operation ............................................................ 8

Split Operation ........................................................... 8

PIP and Split Operation With a Cable Box ................ 8

PIP And Split Operational Buttons.................8

TV/Video Button.......................................................... 8

Search Button .............................................................. 8

Move Button ................................................................. 9

PIP MIN and PIP MAX Buttons.................................... 9

Freeze Button.............................................................. 9

Main Picture Freeze Feature....................................... 9

PIP, Split and Freeze Mode Butons

Operational Chart ..................................................... 9

Remote Control Operation (models

CT-32HXC43, CT-32HC43 and CT-36HC43).......... 10

Battery Installation...................................................... 10

Operating Components with Remote Control............. 11

Programming the Remote.......................................... 12

Programming Without a Code.................................... 12

Component Codes ..................................................... 12

Remote Control Operation

(models CT-32HL43 and CT-36HL43) ....... 14

Battery Installation...................................................... 14

Operating Components with Remote Control............. 15

Programming the Remote.......................................... 17

Programming Without a Code.................................... 17

Component Codes ..................................................... 17

Basic Menu Navigation................................. 20

Icon Menus Operation.................................. 21

Picture........................................................................ 21

Audio .......................................................................... 21

Channels .................................................................... 22

Timer .......................................................................... 22

Lock............................................................................ 23

Set Up ........................................................................ 26

Troubleshooting Chart ................................. 27

Index............................................................... 28

ENGLISH

Note: The warranty and service center information is located in the back of this manual.

Read these instructions completely before operating television. Contents are subject to change without notice or obligation.

1 l

CON GRATULATIONS

Congratulations

Your new Panasonic Tau television features state-of-theart technology for high quality picture and sound with complete audio/video connections for your home theater system. Your TV is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial number of this product are located on the back of the TV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss. Product registration for U.S. customers is available at: www.prodreg.com/panasonic.

ENGLISH

Model Number

Serial Number

Care and Cleaning

Screen (Turn TV Off)

• Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS.

• Avoid excessive moisture and wipe dry.

Note: Do not spray any type of cleaning fluid directly on the

screen.

Feature Chart

MODELS

FEATURES

MENU LANGUAGE ENG/

SPAN/FR

2 TUNER SPLIT

2RF

CLOSED CAPTIONING

V-CHIP CAPABILITY

DIGITAL SCAN RATE

NTSC LINE-DOUBLER

VIDEO NORM

AUDIO NORM

CT-32HL43

CT-36HL43

CT-32HC43

CT-36HC43

• • •

1080i,

1080i, 480p

480p 480p 480p 480p

• • •

CT-32HXC43

Cabinet and Remote Control

• For cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and wipe dry.

• Do not use benzene, thinner or other petroleum based products.

Specifications

Specifications are subject to change without notice or obligation.

Power Source

DVI Input jack (some models) 1.0 compatible Component Input (Y / PB / PR) 75 Ohm, Phono Jack Type

CT-32HC43 (3.6A) CT-32HC43U (3.6A) CT-32HL43 (3.6A) CT-32HL43U (3.6A) CT-32HXC43 (3.6A) CT-36HC43 (3.6A) CT-36HC43U (3.6A) CT-36HL43 (3.6A) CT-36HL43U (3.6A)

Channel Capability - 181 VHF- 12; UHF-56; Cable-113

Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type Audio Input Jacks 500mV RMS 47K Ohm

Video out jack 1Vp-p, 75 Ohm, Phono Jack Type

Audio Output Jacks 0-2.0V RMS 4.7K Ohm

S-Video Input Jacks S-Video (Y-C) Connector

120V AC, 60Hz

STEREO

AI SOUND

BASS/BALANCE/TREBLE

SURROUND

SUBWOOFER

BBE VIVA 3D

BBE

A/V IN (REAR/FRONT)

AUDIO OUT

DVI INPUT

S-VHS INPUT

COMPONENT INPUTS

• • •

•

• • •

(3/1)

(3/1)4 (3/1)

• • •

•

• • •

2 l

HEADPHONE JACK

• • •

Installation

Incoming Cable from

INSTALLATION

Television Location

This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.

• Avoid excessive sunlight or bright lights, including reflections.

• Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.

• Fluorescent lighting may reduce remote control transmitting range.

• Keep away from magnetic equipment, including motors, fans and external speakers.

WARNING: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it. A falling television can cause serious injury or even death. CT-32HL43, CT-32HL43U:

CAUTION: These television receivers for use only with PANASONIC TY-32HL43T stand. Use with other carts (or stands) is capable of resulting in instability causing possible injury.

Cable Connection

Connect the cable supplied by your local cablecompany to ANT1 connection on back of television. Select cable mode and ANT1 in the SET UP menu (refer to page

26).

Note: A cable converter box may be

required for proper reception. Check with your local cable company for compatibility requirements.

Incoming Cable from

Cable Company

75 Ohm VHF/UHF

on back of TV

Antenna Connection

• For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended.

• Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the SET UP menu. (refer to page 26)

Note: Cable Mode is preset at the

factory. Antenna users must change to TV Mode and ANT 1 in the Set Upmenu.

Home Antenna

Important Information Regarding The Use Of Video Games, Computers, Or Other Fixed Image Displays.

ENGLISH

CT-36HL43, CT-36HL43U:

CAUTION: These television receivers for use only with PANASONIC TY-36HL43T stand. Use with other carts (or stands) is capable of resulting in instability causing possible injury.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

• Use 75-ohm coaxial shielded cables.

• Use appropriate input and output connectors, that match your component connectors.

• Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Polarized plug

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is not an operating defect and as such is not covered by Warranty.

The television is designed to display constantly moving images on the screen. Continuous viewing of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), nonexpanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an image), stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited.

The extended use of fixed image program material can cause a permanent picture tube damage, shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be limited by performing the following steps:

• Limit the display of fixed image program material to no more than 15% of total viewing time per week.

• Turn the power off when not in use.

3 l

IN ITIAL SET UP MENU

Initial Set Up Menu

For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures for setting up the features.

IDIOMA/LANGUE

To change menu language to ENGLISH, SPANISH or FRENCH.

Procedure

• Press VOL u to select English, Spanish or French.

ENGLISH

MODE

To select TV (antenna) or CABLE mode depending on the signal source.

Procedure

• Press VOL u to select TV or CABLE.

TILT CORRECTION

This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area.

Procedure

• Press VOL u to display adjustment menu.

• Press t VOL or VOL u to adjust picture tilt.

AUTO PROGRAM

To automatically program all channels with a signal.

Procedure

• Press VOL u to start Auto Programming.

GEOMAGNETIC CORRECTION

This feature is used to adjust discoloration of the picture due to the earth’s magnetic field in the area.

Procedure

• Press VOL u to display adjustment menu.

• Press t VOL or VOL u to adjust discoloration in picture.

4 l

Optional Equipment Connections

Notes:

• The remote control must be programmed with supplied codes to operate the optional equipment.

• Models CT-32HC43, CT-36HC43 and CT-32HXC43 do not have DIGITAL INPUT.

VCR Connection

Follow this diagram when connecting your television to a VCR only.

Viewing a television program Procedure

• Select ANT1 in the SET UP menu under Prog Chan (Program Channels).

• Tune the television to the program you want to view.

Viewing a video Procedure

r Option A

• Select ANT1 in the SET UP menu.

• Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

• Begin the video.

r Option B

• Select ANT2 in the SET UP.

• Tune the television to Channel 3 or 4, depending on your VCR.

• Begin the video.

Recording a television program

OPTIONAL EQUIPMENT CONNECTIONS

• Tune the television to the program you want to view.

Cable Box Connection

Follow this diagram when connecting your television to a cable box only.

ENGLISH

Viewing a premium (scrambled) cable channel Procedure

• Select ANT2 in the SET UP menu.

• Tune the television to Channel 3.

• Using the cable box, tune to the premium cable channel you want to view.

Note: To use special features such as Favorite Channels and

Channel Captions ANT1 must be selected in the SET UP menu.

VCR and Cable Box Connection

Follow this diagram when connecting your television to both a VCR and a cable box.

Procedure

r Option A (Recording and viewing the same program)

• Select ANT2 in the SET UP menu.

• Tune the television to Channel 3 or 4, depending on your VCR.

• Using the VCR, tune to the television program you want to record.

• Begin recording.

r Option B (Recording one program while viewing another

program)

• Select ANT1 in the SET UP menu under Prog Chan.

• Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

• Using the VCR, tune to the television program you want to record.

• Begin recording.

• Press the TV/VIDEO button on the remote control to switch back to TV mode.

Viewing a premium (scrambled) cable channel Procedure

• Select ANT2 in the SET UP menu.

• Tune the television to Channel 3.

• Using the cable box, tune to the premium cable channel you want to view.

Note: To use special features such as Favorite Channels and

Channel Captions ANT1 must be selected in the SET UP menu.

5 l

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections (cont.)

VCR and Cable Box Connection (Cont.)

Note: Models CT-32HC43, CT-36HC43 and CT-32HXC43 do

not have DIGITAL INPUT.

Recording a premium (scrambled) cable channel Procedure

• Select ANT2 in the SET UP menu.

• Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

• Turn the VCR ON.

• Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.

• Using your cable box, tune to the premium cable channel

ENGLISH

r To view a different channel while recording:

you want to record.

• Begin recording.

• Select ANT1 in the SET UP menu.

• Press the TV/VIDEO button on the remote control to TV mode.

• Tune the television to a program (except another premium cable channel).

Amplifier Connection (TO AUDIO AMP)

To listen the audio through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of television.

Note: TO AUDIO AMP terminals cannot be connected directly

to externalspeakers.

Digital TV - Set-Top Box (DTV-STB) or DVD Connection

This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV tuner set-top-box (STB). In order to view DTV programming, the STV must be connected to the component video inputs (Y,PB,PR) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.

This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures.

Use this diagram to connect the DTV-STB (Digital TV Set-TopBox) or DVD player to the back of

Front Control Panel

The front control panel can be used to access menus and switch video mode when the remote control is not available.

Note: The ON/OFF indicator LED (red) will be lit when set

is on.

Audio Adjustments

• Select SPEAKERS ON located in the onscreen AUDIO menu.

• Set amplifier volume to minimum.

• Adjust television volume to desired level.

• Adjust amplifier volume to match the television.

• Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.

• Volume, mute, bass, treble and balance are now controlled through the television.

Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control

audio functions through the external amplifier.

6 l

A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the video inputs. See the optional equipmentmanual for details.

Procedure

• Connect equipment to front Audio/Video input jacks.

• Press TV/VIDEO button to select VIDEO 4 input mode.

• Operate optional equipment as instructed in equipment manual.

Optional Equipment Connections (cont.)

OPTIONAL EQUIPMENT CONNECTIONS

DVI (Digital Visual Interface) input connection

(for models CT-32HL43 and CT-36HL43 only) The DVI/HDCP1 input on your TV can accommodate copy

protected digital programming. The DVI/HDCP input terminal complies with the EIA-861Profiles2 standard and is

not intended for use with personal computers. The DVI/ HDCP input can be connected to an EIA/CEA 861 compliant consumer electronic device, such as a set top

box or DVD player equipped with a DVI output connection3. The DVI/HDCP input is designed for best performance with

HDTV signals, such as 1080i. The DVI/HDCP input will also accept and display 480i and 480p picture signals.

Notes:

1. DVI/HDCP = Digital Visual Interface / High-Bandwidth Digital Copy Protection.

2. EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

3. Consult your consumer electronics dealer for availability details.

Follow the diagram below to connect the TV to a set top box or a DVD player.

Procedure

• Press TV/VIDEO button on the remote control to select DIGITAL-IN input.

• Connect the DVI output from the set top box or a DVD player to the DVI input on the back of the TV.

• Connect the Audio Out signal from the set top box or DVD player to the Audio In input associated with the DIGITAL INPUT.

Note: This HDTV Monitor is not intended to be used with a PC.

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television.

Note: If the Main Picture signal is Component Video Input, no

Program out signal will be available..

TERMINALS ON BACK OF TV

MONITOR

CABLES NOT SUPPLIED

VCR

Procedure

• Connect optional equipment to PROG OUT a ndTO AUDIO AMP terminals.

• PROG OUT terminal display is the same as on-screen display.

• See optional equipment manual for further instructions for recording and monitoring.

Special Remote Buttons

ASPECT Button

The ASPECT button on the remote control lets you select the picture size ratio to match programming format when using DTV STB or DBS.

BBE Button

Press this button to turn the BBE VIVA 3D feature (available in CT-36HL43 and CT-32HL43 only) or BBE

sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes. If you are receiving a stereo program and you press the SAP button, you can cycle between STEREO and MONO.

ENGLISH

7 l

PICTURE IN PICTURE AND SPLIT OPERA TION

PIP

PIP CH

RECALL

PIP

PIP CH

PIP

Picture In Picture and Split Operation

Note: The shapes of PIP and SPLIT function buttons may vary

PIP Operation

This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc.

Procedure

ENGLISH

depending on the remote control.

• Connect incoming cable to ANT 1 input on back of TV.

• Press to display PIP frame.

• Select channels for the PIP frame by pressing

• Select channels for the Main picture by pressing

or use the remote control numeric keypad.

• Press to switch the PIP and MAIN PICTURE

SWA

source.

• Press to view picture source status.

• Press to cancel PIP frame.

PIP and Split Operation With a Cable Box

To view premium (scrambled) cable channels through your cable box in the Main Picture:

Note: Use this procedure if you want to watch premium cable

channels in the Main Picture while viewing a television program or video in the PIP or Split frame.

Procedure

• Select ANT 2 in the SET UP menu.

• Tune TV to Channel 3.

SPLIT

• Press or on the remote control to display the PIP or Split frame.

Note: Audio is from the Main Picture only.

• Verify the Cable box is ON.

• Choose channels for the Main Picture by tuning the cable box.

• Choose channels for the PIP frame by pressing

Note: Swap is not available when using the cable box to tune

channels. If your cable box has video output, it can be connected to the TV to allow you to use all PIP functions. See the equipment manual for more information.

PIP and Split Operational Buttons

TV/VIDEO Button

Main Picture

PIP Frame

Note: Audio is from Main Picture only.

Split Operation

This feature lets you watch two different channels side by side with or without an external video source.

Procedure

SPLIT

• Press to display Split screen.

• Select channels for the Split by pressing .

• Select channels for the Main picture by pressing

• Press to switch the SPLIT SCREEN and MAIN PICTURE source.

• Press to view picture source status.

• Press to cancel Split screen.

or use the remote control numeric keypad.

SWA

RECALL

SPLIT

Press when PIP or Split frame is displayed to select desired input mode.

Main Picture

CH #

Main Picture

COMPONENT1 COMPONENT2

VIDEO 1/2/3/4

PIP Frame

COMPONENT1 COMPONENT2

VIDEO 1/2/3/4

SPLIT Frame

DIGITAL-IN

(some models)

DIGITAL-IN

(some models)

Search Button (PIP and Split)

This feature lets you scan through all available channels.

Procedure

SPLIT

• Press or to display PIP or Split frame.

8 l

PIP Operation (cont.)

PIP

FREEZE

PICTURE IN PICTURE AND SPLIT OPERATION

OPEN/CLOSE

• Press to display search frames.

• Press again to stop search feature. PIP or

OPEN/CLOSE

Split frame channel will be the last active search frame.

SPLIT

• Press or to cancel PIP or Split frame

Main Picture

Search Frames

Move Button (PIP only)

This feature is used to move PIP frame to one of four corners.

Procedure

• Press to display PIP frame.

MOVE

• Press to position PIP frame to desired corner.

• Press to cancel PIP frame.

• Press to stop PIP or Split frame action.

TV/VCR

• Press again to continue action.

PIP

SPLIT

• Press or to cancel PIP frame.

Main Picture

PIP freeze frame

Split freeze frame

Note: Audio is from Main Picture only.

Main Picture Freeze Feature

This feature is used to stop action of the Main Picture and display it on a Split or PIP freeze frame.

Procedure

• To stop action for Main picture, press while PIP or Split frame is not displayed.

• Main Picture freeze will be displayed in a PIP or Split frame, depending on the selection in the Freeze menu located in Picture Other ADJ. section (refer to page 21).

TV/VCR

ENGLISH

Main Picture

PIP Frame

PIP MIN and PIP MAX Buttons

While PIP frame is displayed, press PIP MIN or PIP MAX button to vary the size of PIP frame.

Procedure

• Press to display PIP frame.

PIP MIN PIP MAX

• Press or to size PIP frame.

• Press to cancel PIP frame.

MAX

Main Picture

MIN

Freeze Button (PIP and Split)

This feature is used to stop action in PIP or Split frame.

Procedure

• Press or to display PIP or Split frame

PIP

SPLIT

• Press again to cancel Main Picture freeze

TV/VCR

frame.

Note: While Main Picture freeze frame is displayed, only

MOVE button is active for PIP, all other PIP and Split buttons has no effect (see chart).

PIP, Split and Freeze Mode Buttons Operational chart

This chart indicates the buttons that are operational with PIP, Split or Main Picture Freeze mode.

REMOTE

BUTTONS

PIP MIN

PIP MODE SPLIT MODE

Size Smaller No Effect No Effect

PIP MAX Size Larger No Effect No Effect

FREEZE

PIP CH

PIP

SPLIT

MOVE

SWAP

Freeze PIP

frame

Change

Channel

Displays

Search Frame

Displays PIP

Frame

Displays Split

Frame

Move PIP

Frame

Swap with Main

Picture

Freeze Split

Frame

Change

Channel

Displays

Frame

Displays PIP

Frame

Displays Split

Frame

No Effect

Swap with

Main Picture

MAIN

PICTURE

FREEZE

MODE

Display or

Delete

No Effect

Move PIP

Frame

No Effect

9 l

REMOTE CONTROL OPERATION (MODELS CT-32HXC43, CT-32HC43 AND CT-36HC43)

Remote Control Operation (models CT-32HXC43, CT-32HC43 and CT-36HC43)

POWER

Press to turn ON and OFF.

ACTION

Press to select remote operation.

Press to access menus.

ENGLISH

MUTE

Press to mute sound. Press to display and cancel CC (Closed Caption).

TV/VIDEO

Press to select TV or input modes.

BBE

BBE - Press to turn on or off. MENU- Press to access DBS or DVD menus.

SAP

Press to access audio modes (Stereo, SAP or Mono)

Press to adjust TV sound and navigate in menus.

Press to select next or previous channel and navigate in menus.

Press to display time, channel, sleep timer, and other options.

SEARCH - Press for PIP or SPLIT search. GUIDE - DBS functions button

DBS functions button.

VOL VOL

RECALL

GUIDE

EXIT

1 2 4 7

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed channel or input modes.

*Remote EUR7613Z80 is same as EUR7613Z40, except it has a silver body.

EUR7613Z40

*EUR7613Z80

Battery Installation

Use two AA batteries:

Remove battery cover by pushing in and up neararrow. Install batteries matching (+) and (-) polarity signs. Replace the battery cover.

Note: Incorrect installation can cause battery leakage and

corrosion that will damage the Remote Control

ASPECT

PROG

ASPECT - Select picture size (ratio) to match programming format. PROG - Press to enter minor number in a compound number.

*PIP MIN

REW

*SWAP PAUSE

*FREEZE

TV/VCR

*Split and PIP function buttons

Component function buttons

*SPLIT

PLAY

*MOVE

STOP

VCR /DBS CH

Precautions

• Replace batteries in pairs.

• Do not mix battery types (zinc carbon with alkaline).

• Do not recharge, heat, short-circuit, disassemble, or burn batteries.

*PIP CH

*PIP MAX

*PIP

REC

10 l

REMOTE CONTROL OPERATION (MODELS CT-32HXC43, CT-32HC43 AND CT-36HC43)

TV/VIDEO

EXIT

Operating Components with Remote Control

Note: Refer to page 12 for programming Remote Control

procedure.

Operating a VCR

Program the remote control to use with VCR.

TO DO THIS... PRESS

Turn on/off

POWER

Operating a DBS

Program the remote control to use with DBS.

TO DO THIS... PRESS

Turn on/off

Display DBS menu

POWER

ACTION

Select TV Input mode for VCR

Change Channels up/down

Record

Play

Stop

Fast Forward

Rewind the Tape

Pause

Change to TV or VCR Mode

On screen VCR Display

VCR/DBS CH

REC

PLAY

STOP

REW

PAUSE

TV/VCR

RECALL

Operating a CABLE BOX

Program the remote control to use with Cable Box.

TO DO THIS... PRESS

Menu Navigation

1 2 4

Select a Channel

8 0

Program Information

Back to previous channel

Select next page up/down

Exit menus

Display program Guide

RECALL

R-TUNE

VCR/DBS CH

GUIDE

Operating a DVD

Program the remote control to use with DVD

TO DO THIS... PRESS

Turn on/off

POWER

VOL VOL

3 6

ENGLISH

Turn on/off

Select a Channel

Change Channels Up/Down

Back to previous channel

POWER

1 2 4 7

R-TUNE

Next/Previous Chapter

DVD Display

Skip Search Reverse

Skip Search Fast Forward

Play

DVD Open/Close

Stop

Still

Slow + / -

CH CH

RECALL

REW

PLAY

TV/VCR

STOP

PAUSE

VCR/DBS CH

11 l

REMOTE CONTROL OPERATION (MODELS CT-32HXC43, CT-32HC43 AND CT-36HC43)

ACTION

Programming The Remote

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Device Operates Default

TV TV (Panasonic Only) Panasonic Code DBS/CBL DBS STB & CBL STB (Preset) Panasonic DBS Code VCR VCR (Preset) Panasonic Code DVD DVD (Preset) Panasonic Code

Note: Determine the manufacturer of the component and look

in the table for the code.

Programming with a Code

ENGLISH

Procedure

• Confirm that the external component is plugged and operating.

• Turn the component off.

• Press and together, for at least 5

seconds.

• Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.

• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).

• Press the Remote Control to test the component. If the procedure was successful, the

component will turnon.

Note: If the component does not operate with the Remote

Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

POWER

Programming Without A Code

This procedure searches all codes and is called the “sequence method.”

• Confirm that the external component is plugged in and on.

• Turn the component off.

• Press and together, for at least 5

ACTION

seconds.

• Press appropriate component button on the Remote Control.

• Press VOL u to move forward to the next code. Press t VOL to move backward.

• Press the Remote Control to test the component. If the procedure was successful, the

component will turn on.

Note: Repeat the above steps until the component code is

found. It may take many attempts before the correct code isfound.

• After the code is found, press to store the code.

POWER

ACTION

Component Codes

The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR CABLE DVD

DBS

12 l

REMOTE CONTROL OPERATION (MODELS CT-32HXC43, CT-32HC43 AND CT-36HC43)

Component Codes (cont.)

Codes For VCR

Brand Code

Admiral 335 Aiwa 332 Akai 314, 315, 316, 329 Audio

Dynamic Bell & Howell 305, 313 Broksonic 320, 326 Canon 323, 325 CCE 343 Citizen 306 Craig 305, 306, 329 Curtis

Mathes Daewoo 301, 324, 343 DBX 310, 311, 339 Dimensia 345

Emerson

Fisher Funai 320, 326, 334

GE 324, 333, 345 Goldstar 306 Gradiente 334 Hitachi 300, 323, 345 Instant

Replay Jensen 339 JVC 310, 311, 334, 339 Kenwood 306, 310, 311, 339

LXI Magnavox 323, 324, 331

Marantz 310, 311, 339 Marta 306 Memorex 309, 324

MGA Minolta 300, 345 Mitsubishi Multitech 304, 347

NEC 310,311, 334, 339 Olympic 323, 324 Optimus 306, 321, 328, 335 Orion 320, 326 Panasonic 321,322, 323, 324

Penney Pentax 300, 311, 345

311, 339

324, 345

303, 319, 320, 325, 326, 343

305, 307, 308, 309, 313

323, 324

300, 305, 306, 307, 308, 309

338, 340, 341, 347, 348

300,305, 310, 311, 324, 339, 345

Philco Philips 323, 324, 331

Pioneer 323

Proscan

Quasar 321, 322, 323, 324 Radio Shack

RCA

Realistic Samsung 302, 304, 333

Sansui 320, 326, 339, 352 Sanyo 305, 309, 313

Scott

Sears Sharp 335, 336

Shintom 317 Signature

2000 Singer 337 Sony 328, 329, 330 Sylvania 331, 324, 331 Tashiro 306 Tatung 310, 311, 339 Teac 310, 311, 339 Technics 321, 322, 323, 324 Teknika 324 Toshiba 301, 346 Vector

Research Wards Yamaha 305, 310, 311, 339

Zenith 306, 344

Codes For VCR (Contd.)

Brand Code

320, 323, 324, 326, 331, 343

300, 301, 302, 323, 324, 331, 333, 345, 346

305, 309, 324, 333, 336, 340

300, 301, 302, 323, 324, 331, 333, 345, 346

305, 309, 324, 336, 340

301, 302, 304, 309, 320, 326, 338, 340, 347, 348

300, 305, 306, 307, 308

335

311 306, 309, 335, 336,

344

Codes For Cable Box

Brand Code

ABC 224 Archer 225, 232 Cableview 205, 232 Citizen 205, 222 Curtis 212, 213

Diamond Eagle 229

Eastern 234 GCbrand 205, 232 Gemini 222

General Instrument/ Jerrold

Hamlin

Hitachi 203, 224 Macom Magnavox 233

Memorex 230 Movietime 205, 232

Oak

Panasonic

Philips

Pioneer 201, 216 Pulsar 205, 232 Puser 232 RCA 215 Realistic 232

Regal

Regency 234 Rembrandt Samsung 205 Scientific Atlanta Slmark 201, 205

Sprucer 205, 210 Stargate 205, 210 Teleview 201, 205 Texscan 244 Tocom 235 Toshiba 204 Unika 225, 232

224, 225, 232

211, 219, 220, 221, 222, 224, 225, 226, 227

212, 218, 240, 241, 242, 245

203, 204, 205

202, 237, 239

209, 210, 214

206, 207, 228, 229, 230

212, 218, 240, 241, 242, 245, 249

205, 232, 237

211, 212, 213

Codes For Cable Box (Contd.)

Brand Code

Universal 222, 232 Videoway 206 Viewstar 229, 230 Zenith 200, 217 Zenith/.Drake

Satellite

Codes For DBS

Brand Code

Dish Network (Echostar)

Echostar 105 Express VU 105, 115 G. E. 106 G.I. (General

Instrument) Gradiente 114 Hitachi 103, 111,

HNS (Hughes) 103 Magnavox 101, 102 Panasonic 104 Philips 101, 102 Primestar 108 Proscan 106, 109,

RCA 106, 109,

Sony 107 Star Choice 103, 108 Toshiba 100 Uniden 101, 102

Codes For DVD

Brand Code

Denon 100 Ferguson 101 JVC 109 Mitsubishi 105 Nordmende 101 Panasonic 100 Philips 103 Pioneer 102 RCA 101 Saba 101 Samsung 110 Sharp 108 Sony 104 Technics 100 Thomson 101 Toshiba 103 Yamaha 100 Zenith 107

200

105, 115, 116

108

112

110, 113

ENGLISH

13 l

REMOTE CONTROL OPERATION (MODELS CT-32HL43 AND CT-36HL43)

Remote Control Operation (models CT-32HL43 and CT-36HL43)

POWER

ASPECT

TV/VIDEO

ENGLISH

Press to turn ON and OFF.

MUTE

Press to mute sound. Press to display and cancel CC (Closed Caption).

ACTION

VOL VOL

BBE

EXIT

Press to select remote operation.

Press to access menus.

Press to adjust TV sound and navigate in menus.

BBE - Press to turn on or off. MENU - Press to access DBS or DVD menus.

Select picture size (ratio) to match programming format.

Press to select TV or input modes.

SAP

Press to access audio modes (Stereo, SAP or Mono).

LIGHT

Press to illuminate remote buttons.

CH CH

Press to select next or previous channel and navigate in menus.

RECALL

Press to display time, channel, sleep timer, and other options.

GUIDE

DBS functions button.

PAGE

DBS functions button.

1 2 4 7

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed channel or input modes.

EUR7603Z90

Battery Installation

Use two AA batteries:

Remove battery cover by pushing in and up neararrow. Install batteries matching (+) and (-) polarity signs. Replace the battery cover.

Note: Incorrect installation can cause battery leakage and

corrosion that will damage the Remote Control

DBS page up/down and DVD skip -/+ buttons.

PROG

Press to enter minor number in a compound number.

*PIP MIN

REW

PAUSE STOP

*FREEZE

TV/VCR

*PIP *SPLIT *MOVE

*Split or PIP function buttons

Component function buttons

PLAY

*PIP CH VCR CH

Precautions

• Replace batteries in pairs.

• Do not mix battery types (zinc carbon with alkaline).

• Do not recharge, heat, short-circuit, disassemble, or burn batteries.

*PIP MAX

REC

*SEARCH

OPEN/CLOSE

*SWAP

14 l

REMOTE CONTROL OPERATION (MODELS CT-32HL43 AND CT-36HL43)

EXIT

Operating Components with Remote Control

Note: Refer to page 17 for programming Remote Control

procedure.

Operating a VCR

Program the remote control to use with VCR.

TO DO THIS... PRESS

Turn on/off

Select TV Input mode for VCR

Change Channels up/down

Record

Play

Stop

Fast Forward

Rewind the Tape

Pause

Change to TV or VCR Mode

On screen VCR Display

POWER

TV/VIDEO

PIP CH

VCR CH

REC

PLAY

STOP

REW

PAUSE

TV/VCR

RECALL

Operating a DBS

Program the remote control to use with DBS.

TO DO THIS... PRESS

Turn on/off

Display DBS menu

DBS ASPECT

Menu Navigation

POWER

ASPECT

1 2 4

Select a Channel

8 0

Program Information

Back to previous channel

Select next page up/down

Channel Up/Down

RECALL

R-TUNE

PAGE

PIP CH

VCR CH

VOL VOL

ENGLISH

3 6 9

Operating a CABLE BOX

Program the remote control to use with Cable Box.

TO DO THIS... PRESS

Turn on/off

Select a Channel

POWER

1 2 4 7

Change Channels Up/Down

Back to previous channel

Exit menus

R-TUNE

Exit menus

Display program Guide

GUIDE

Operating a DVD

Program the remote control to use with DVD.

TO DO THIS... PRESS

Turn on/off

Next/Previous Chapter

DVD Display

Skip Search Reverse

Skip Search Fast Forward

Play

DVD Open/Close

POWER

CH CH

RECALL

REW

PLAY

OPEN/CLOSE

15 l

REMOTE CONTROL OPERATION (MODELS CT-32HL43 AND CT-36HL43)

EXIT

MUTE

EXIT

Operating a DTV

Program the remote control to use with DTV.

TO DO THIS... PRESS

Turn on/off

DTV ASPECT

POWER

ASPECT

1 2 4

Select a Channel

8 0

Navigation Left / Right

ENGLISH

Back to previous channel

Exit menus

VOL VOL

R-TUNE

Operating a Cassette Deck

To operate a cassette deck, the remote control must be in AUX mode and be programmed with the appropriate code for your equipment.

TO DO THIS... PRESS

Turn on/off

Receiver Volume Up/Down

Deck A/B

Record

Play

Stop

Fast Forward

POWER

VOL VOL

R-TUNE

REC

PLAY

STOP

3 6 9

TO DO THIS... PRESS

To select AV Inputs or Components:

Surround VOL Down

Surround VOL UP

Center CH VOL Up/Down

Operating a PVR (Personal Video Recorder)

Program the remote control to use with a PVR.

TO DO THIS... PRESS

Turn on/off

PVR Navigation

Select a Channel

Play

Record

Press Remote numeric

keypad

AV 1 Press 1 AV 2 Press 2 AV 3 Press 3 AV 4 Press 4 CD Press 5 TUNER Press 6 PHONO Press 7 TAPE Press 8 AUX Press 9

PIP MAX

VCR CH

POWER

VOL VOL

1 2 4 7

PLAY

REC

Rewind the Tape

Pause

REW

PAUSE

Operating a Receiver

Program the remote to operate audio receiver.

TO DO THIS... PRESS

Turn on/off

Audio Mute

RCVR. VOL Up Down

Tuner Pre-set stations Up/ Down

POWER

VOL VOL

CH CH

16 l

Pause

Back to previous channel

Exit menus

PVR Guide

Replay Zones

Quick Skip

Return to live

PAUSE

R-TUNE

GUIDE

R-TUNE

OPEN/CLOSE

PROG

REMOTE CONTROL OPERATION (MODELS CT-32HL43 AND CT-36HL43)

Programming the Remote

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Default Modes for Remote Control

Device Operates Default

TV TV (Panasonic Only) Panasonic TV Code DTV-STB DTV (Panasonic Only) Panasonic DBS Code

CABLE CABLE (Preset) DBS

VCR DVD/CD

AUX RCVR Audio receiver (Preset) Panasonic RCVR code

Note: Determine the manufacturer of the component and look

in the table for the code.

DBS (Preset) Panasonic DBS Code

VCR (Preset0 Panasonic VCR Codes

DVD and CD (Preset) Panasonic DVD Codes

Personal Video Recorders,

Tape and VCR2

Panasonic CABLE

Code

Panasonic Personal

Video Recorder Code

Programming with a Code

Procedure

• Confirm that the external component is plugged and operating.

• Turn the component off.

• Press and together, for at least 5

ACTION

seconds.

• Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV, CABLE or DBS.

• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).

• Press the Remote Control to test the

component. If the procedure was successful, the component will turnon.

Note: If the component does not operate with the Remote

Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

POWER

Programming without a Code

This procedure searches all codes and is called the “sequence method.”

Procedure

• Confirm that the external component is plugged in and on.

• Turn the component off.

• Press and together, for at least 5

ACTION

POWER

seconds.

• Press appropriate component button on the Remote Control.

• Press VOLu to move forward to the next code.

Presst VOL to move backward.

• Press the Remote Control to test the

POWER

component. If the procedure was successful, the component will turn on .

Note: Repeat the above steps until the component code is

found. it may take many attempts before the correct code is found.

Component Codes

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR DVD DVD (CD)

AUX (VCR2) AUX (TAPE) RECEIVER

CABLE DBS AUX (PVR)

ENGLISH

17 l

REMOTE CONTROL OPERATION (MODELS CT-32HL43 AND CT-36HL43)

Component codes

Codes For VCR

Brand Code

Admiral 335 Aiwa 332

Akai Audio

Dynamic Bell & Howell 305, 313 Broksonic 320, 326 Canon 323, 325 CCE 343

ENGLISH

Citizen 306 Craig 305, 306, 329 Curtis

Mathes Daewoo 301, 324, 343 DBX 310, 311, 339 Dimensia 345

Emerson

Fisher Funai 320, 326, 334

GE 324, 333, 345 Goldstar 306 Gradiente 334 Hitachi 300, 323, 345 Instant

Replay Jensen 339

JVC

Kenwood

LXI Magnavox 323, 324, 331

Marantz 310, 311, 339 Marta 306 Memorex 309, 324

MGA Minolta 300, 345 Mitsubishi Multitech 304, 347 NEC Olympic 323, 324 Optimus

314, 315, 316, 329

311, 339

324, 345

303, 319, 320, 325, 326, 343

305, 307, 308, 309, 313

323, 324

310, 311, 334, 339

306, 310, 311, 339

300, 305, 306, 307, 308, 309

338, 340, 341, 347, 348

310, 311, 334, 339

306, 321, 328, 335

Codes For VCR (cont.)

Brand Code

Orion 320, 326 Panasonic

Penney

Pentax 300, 311, 345 Philco Philips 323, 324, 331

Pioneer 323

Proscan

Quasar

Radio Shack

RCA

Realistic Samsung 302, 304, 333 Sansui Sanyo 305, 309, 313

Scott

Sears Sharp 335, 336

Shintom 317 Signature

2000 Singer 337 Sony 328, 329, 330 Sylvania 331, 324, 331 Tashiro 306 Tatung 310, 311, 339 Teac 310, 311, 339

Technics Teknika 324

Toshiba 301, 346 Vector

Research Wards

Yamaha Zenith 306,344

321, 322, 323, 324

300, 305, 310, 311, 324, 339, 345

320, 323, 324, 326, 331, 343

300, 301, 302, 323, 324, 331, 333, 345, 346

321, 322, 323, 324

305, 309, 324, 333, 336, 340

300, 301,302, 323, 324, 331, 333, 345, 346

305, 309, 324, 336, 340

320, 326, 339, 352

301, 302, 304, 309, 320, 326, 338, 340, 347, 348

300, 305, 306, 307, 308

335

321, 322, 323, 324

311 306, 309, 335,

336, 344 305, 310, 311,

339

Codes For Cable Box

Brand Code

ABC 224 Archer 225, 232 Cableview 205, 232 Citizen 205, 222 Curtis 212, 213 Diamond 224, 225, 232 Eagle 229 Eastern 234 GCbrand 205, 232 Gemini 222

General Instrument/ Jerrold

Hamlin Hitachi 203, 224

Macom 203, 204, 205 Magnavox 233 Memorex 230 Movietime 205, 232 Oak 202, 237, 239 Panasonic 209, 210, 214

Philips Pioneer 201, 216

Pulsar 205, 232 Puser 232 RCA 215 Realistic 232

Regal

Regency 234 Rembrandt 205, 232, 237 Samsung 205 Scientific

Atlanta Slmark 201, 205 Sprucer 205, 210 Stargate 205, 210 Teleview 201, 205 Texscan 244 Tocom 235 Toshiba 204 Unika 225, 232 Universal 222, 232 Videoway 206 Viewstar 229, 230 Zenith 200, 217 Zenith/.Drake

Satellite

211, 219, 220, 221, 222, 224, 225, 226, 227

212, 218, 240, 241, 242, 245

206, 207, 228, 229, 230

212, 218, 240, 241, 242, 245, 249

211, 212, 213

200

Codes For DBS

Brand Code

Dish Network (Echostar)

Echostar 105 Express VU 105, 115 G. E. 106 G.I. (General

Instrument) Gradiente 114 Hitachi 103, 111,

HNS (Hughes) 103 Magnavox 101, 102 Panasonic 104 Philips 101, 102 Primestar 108 Proscan 106, 109,

RCA 106, 109,

Sony 107 Star Choice Toshiba 100 Uniden 101, 102

Codes For DVD

Brand Code

105, 115, 116

108

112

110, 113

103, 108

18 l

Component Codes (Cont.)

Codes For Cassette Decks

Brand Code

Aiwa 223, 224, 225 Denon 231 Fisher 203 Jensen 214 JVC 229, 230 Kenwood 200, 207 Marantz 202 Nakamichi 205 Onkyo 208, 209, 213 Panasonic 216, 218 Philips 222

Pioneer 204 RCA 226, 227, 228 Sansui 205, 210 Sharp 231 Sony 219, 220 Teac 210, 211, 215 Technics 216, 218 Yamaha 201, 202

Codes For Receivers Brand Code

Admiral 120 Aiwa 125, 126 Denon 134, 135, 136 Fisher 104 Garrard 113

REMOTE CONTROL OPERATION (MODELS CT-32HL43 AND CT-36HL43)

Codes For Receivers

(cont.)

Brand Code

Harman Kardon

Jensen 129 JVC 132, 133 Kenwood 100, 108 Magnavox 127 Marantz 124 Mclntosh 116 Nakamichi 106 Onkyo 109, 114

Optimus Panasonic 118, 119, 121

Philips 123 Pioneer 105, 107 Quasar 118, 119, 121

RCA Sansui 103, 111, 139

Sharp 134, 137 Sony 122 Soundesign 138 Teac 111, 112, 113 Technics 118, 119, 121 Victor 132, 133 Yamaha 101, 102

115, 123

103, 127, 130, 131

103, 105, 127, 130, 131

Codes For CD Player

Brand Code

Admiral 226 Aiwa 233, 235 Carver 229 Denon 242 Emerson 239 Fisher 205

Harman/Kardon Hitachi 207

Jensen 234 JVC 240, 241, 245 Kardon 223

Kenwood LXI/Sears 236

Magnavox 229, 232 Marantz 229 McIntosh 221 Nakamichi 210

Onkyo 214, 215 Optimus

Panasonic 224, 225, 227 Philips 229, 230 Pioneer 208 Quasar 224, 225, 227

RCA Sansui 210, 246

Sanyo 205 Scott 210, 246 Sharp 242, 243 Sherwood 220 Sony 228 Soundesign 244 Teac 212, 216, 218 Technics 224, 225, 227 Victor 240, 241, 245 Yamaha 202, 203, 204

219, 220, 221, 223

200, 201, 211, 245

208, 218, 220, 222

231, 237, 238, 247

Codes For Personal Video

Recorders

Brand Code

Panasonic Replay TV

Philips Tivo 101 Sony Tivo 102

100

ENGLISH

19 l

BASIC MENU NAVIGATION

Basic Menu Navigation

Press

to display the Main Menu.

Press

to choose the desired icon.

ENGLISH

Press to enter the sub-

menu field.

Press to select desired

sub-menu.

Press to enter sub sub-

menu field.

sub sub- Menu Field

Press to select desired

sub sub-menu.

sub Menu Field

Press to select or adjust

desired sub submenu.

Press

to select or adjust desired sub-menu.

Note: For sub -menu with OTHER ADJ.

Press to select OTHER ADJ.

BRIGHTNESS 32 IIIIIIIIII----------

Note: To EXIT menus.

Press

repeatedly until Main Menus icon is highlighted.

Press to exit

Main Menu.

Main Menu Icon

NORMAL PICTURE

20 l

Icon Menus Operation

PICTURE

Note: While sub-menu features are highlighted, press VOL u

to adjust or activate.

r PIC MODE - Lets you choose one of three pre-set

Picture Modes that best suits the program you are viewing. Selecting this feature will also affect Color Temperature setting.

• VIVID - This is the default mode, It provides enhanced picture contrast and sharpness for viewing in a well-lit room.

• STANDARD - Recommended for normal viewing conditions with subdued room lighting.

• CINEMA - Select this mode for watching movies in a darkened room. It provides a soft, film-like picture.

Note: Each mode has its own picture settings (Color, Tint, Brightness,

Picture and Sharpness).

r COLOR - Adjusts desired color intensity. r TINT - Adjusts natural flesh tones. r BRIGHTNESS - Adjusts dark areas of picture. r PICTURE - Adjusts white areas of picture. r SHARPNESS - Adjusts clarity of outline detail. r NORMAL - Reset adjustments to factory default

settings.

IC ON MENUS OPERATION

Note: When viewing a non-standard DTV signal

format, you can change color parameters manually for the best picture quality.

• VM (VELOCITY MODULATION) - Increases picture sharpness and provides crisp white to black transitions

• FREEZE - This feature is used to freeze main picture and display it in a PIP or SPLIT frame, when the FREEZE button on the remote control is pressed. Press FREEZE again to delete frame. SWAP, SIZE, SEARCH, PIP MIN and PIP MAX buttons are not functional in this mode.

AUDIO

Note: While sub-menu features are highlighted, press VOL u

to adjust or activate.

r MODE - Select STEREO, SAP (Second Audio

Program) or MONO. (Use MONO when stereo signal is weak).

r BASS - Increase or decrease the bass response. r TREBLE - Increase or decrease the treble response. r BALANCE - Emphasize the left/right speaker volume.

r NORMAL - Reset BASS, TREBLE and BALANCE

adjustments to factory default settings.

ENGLISH

r OTHER ADJ . Highlight OTHER ADJ. and press VOL u to display the sub sub-menu.

Note: While sub sub-menu features are highlighted, press

VOL u to select or activate.

• COLOR TEMP (temperature) - To increase or decrease WARM (red) and COOL (blue) colors to suit personal preferences.

• NATURAL COLOR - To increase the color reproduction range with natural color gradation and highly delicate hues.

• VIDEO NR - Reduces noise in the channel, commonly called snow.

• 3D Y/C FILTER - Minimizes noise and cross color in the picture.

• COLOR MATRIX - Available only with 480p signal. Select HD or SD to automatically adjust color parameters for HD (high definition) and SD (standard definition). This feature is not selectable when viewing regular TV (NTSC) program.

r OTHER ADJ.

Note: While sub sub-menu features are highlighted, press

VOL u to adjust or activate.

• AI SOUND - Equalize overall volume levels across all channels. (AI sound is not available in VIDEO mode).

• BBE® - Sound technology enhances speech intelligibility and restores the dynamic range of musical passages to

provide outstanding natural sound.

• BBE VIVA 3D - BBE VIVA provides a musically accurate natural 3D image with hi-fi sound. The clarity of the sound is improved by BBE while the width, depth and height of the sound image are expanded by BBE's proprietary 3D sound processing. BBE VIVA is compatible with all TV programs including news, music, dramas, movies and sports as well as electronic games. BBE VIVA enhances the surround sound effect, while maintaining the clarity of dialogue.

Note: BBE VIVA 3D is only used in models CT-32HL43 and

CT-36HL43.

21 l

IC ON MENUS OPERATION

AUDIO (cont.)

r OTHER ADJ.

• SURROUND - Enhances audio response when listening to stereo.

• SPEAKERS - This feature is used when connecting to an external amplifier.

• ON - TV speakers operate normally.

• OFF & Variable Audio Out - TV speakers off - audio

adjustable by television.

• OFF & Fixed Audio Out - TV speakers off - audio

adjustable by the external amplifier only.

CHANNELS

r CHANNEL SCAN - Select FAV or ALL.

Note: Use remote numeric keypad to select desired FAV

channels.

r FAVORITES - To enter up to 16 favorite channels. Use

ENGLISH

remote control numeric keypad to select desired channels.

r OTHER ADJ.

Highlight OTHER ADJ. and press VOL u to display the sub sub-menu.

• PRESET CAPTION - To enter channel numbers for popular TV stations.

Procedure

• Press CH q to select desired preset caption.

• Then use the remote numeric keypad to select

desired channel (refer to your local TV guide).

Procedure

• Press CH p or CH q to select the desired Video input.

• Press t VOL or VOL u to select desired preset input label (see chart below).

INPUT LABEL CHART

PRESET LABELS

VCR Select when VCR is connected to video input. DVD Select when DVD is connected to video input.

SKIP

CABLE DBS Select when DBS is connected to video input.

DTV STB

PVR(Personal Video Recorder)

GAME

AUX _____ Select to delete input label.

REASON FOR SELECTING

Select to skip unused video input when

pressing TV/VIDEO button.

Select when CABLE box is connected

Select when digital TV set-top-box is

Select when a personal video recorder is

Select when Video GAME is connected

Select when other components are

to video input.

connected

to video input.

connected to video input.

to video input.

connected.

TIMER

Note: Use CHp or CH q to highlight and use t VOL or

VOL u to select.

Note: To delete a channel, press t VOL while channel

number is highlighted.

• MANUAL CAPTION - To enter numbers and captions manually.

Note: Use the remote numeric keypad to select desired

channel (refer to your local TV guide).

• INPUT LABEL - To label video input connections for onscreen display.

22 l

r SLEEP - Select to turn TV off in 30, 60, or 90 minutes.

Select NO to turn sleep timer off.

r TIMER 1 and TIMER 2 - Select one or both timers to

turn the TV on and off at selected times, on selected channel, and on selected days.

Notes:

• The television automatically turns OFF after 90 minutes when turned ON by the TIMER. If the OFF time is selected or if a key is pressed, the automatic OFF after 90 minutes will becancelled.

• The TIMER is active when the television is OFF or ON. The television will switch to the selected channel at the selected time set in the TIMER.

r CLOCK SET - Set the time of the day and the day of

the week.

IC ON MENUS OPERATION

LOCK

r ENTER CODE - Use the remote numeric keypad to

enter a four-digit secret code (Use a code that is easy to remember and record it in a safe place).

r LOCK SET - To prevent video games, VCR tapes and

all channels and video modes from being viewed.

Notes:

• If you do not remember your code, LOCK will unlock in 12, 24, or 48 hours, depending on the current setup. Be cautious when selecting ALWAYS. If ALWAYS is selected, and you forget your secret code, the TV must be serviced by a qualified technician to clear the LOCK setup.

• If you select CHANGE CODE, and you change your code from the one used in the LOCK menu, your new code becomes the controlling code.

Procedure

• Press VOL u to select.

• OFF - Turns Lock function off.

• GAME - Lock CH 3, 4 and Video inputs.

• CHANNEL - Lock up to four channels.

• ALL - Locks all channels and video inputs.

Procedure

• Press CH q to highlight Enter Code.

• Use the numeric keypad to enter your four digit code.

(Use a code that is easy to remember and record it in a safe place.)

• Press CH q to highlight V-CHIP SET.

• Press t VOL or VOL u to select desired mode, U.S. TV Programs, U.S. Movies, Canadian English or Canadian French mode.

• Press CH q to highlight SETTING.

• Press t VOL or VOL u to display desired rating chart U.S. TV Programs, U.S. Movies, Canadian English or Canadian French.

• Press VOL u to select ON or OFF.

• Press CH q to select VIEW NR PROGRAMS? for U.S. TV Programs and U.S. Movies or VIEW E PROGRAMS for Canadian English and Canadian French.

• Press VOL u to select YES or NO.

U.S TV Programs

This TV model features the “V-Chip technology” which allows you to use U.S. TV PROGRAMS Guide ratings to block various types of TV programs. PIP will also be blocked automatically.

ENGLISH

• Press then CH q to highlight HOW LONG?.

ACTION

• Press VOL u to select 12 Hours, 24 Hours, 48 Hours or ALWAYS.

Note: If GAME, CHANNEL or ALL is selected, and if a blocked

channel or video input is selected, the message LOCKED displays in the upper left corner of the TV screen.

r V-CHIP SET - V-Chip technology allows parents to use

the TV rating codes to block programs that they feel are inappropriate for their children to watch.

Note: Selecting “Yes”, NR programs will be received. Selecting

“NO”, NR programs will be blocked (See Customer Caution on next page).

Procedure

• Press CH q to select SETTING.

• Press VOLu to select BASIC or DETAILED. BASIC - Allows you to select only general ratings such as TV-Y, TV-PG, etc. DETAILED - Allows you to select both general ratings and content such as V, L, etc.

• Press CH q or CH p to move between different ratings.

• Use t VOL or VOL u to select ratings you want to block (RED) and unblock (GREEN).

• Press to return to V-CHIP SET.

• Press CH q to select HOW LONG?

• Press t VOL or VOL u to select 12, 24, 48 hours or

• Press to return to Main Menu, then press CH p

ACTION

ALWAYS.

ACTION

to exit.

23 l

IC ON MENUS OPERATION

LOCK (cont.)

U.S TV Programs (cont.)

Customer Caution

The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) per FCC Rules Section 15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of programming: ”

• Emergency Bulletins (Such as EAS messages, weather warnings and others)

• Locally originated programming

• News

• Political

ENGLISH

• Public Service Announcements

• Religious

• Sports

• Weather

U.S. TV Programs Rating Chart Description

NR Not Rated. SEE CUSTOMER CAUTION above.

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

FV FANTASY/CARTOON VIOLENCE

V VIOLENCE S SEX L OFFENSIVE LANGUAGE

D DIALOGUE WITH SEXUAL CONTENT

All children. The themes and elements in this

program are specifically designed for a very young audience, including children from ages 2-6.

Directed to older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of 7.

General audience. It contains little or no violence, no strong language, and little or no sexual dialogue or situations.

Parental guidance suggested. The program may contain infrequent coarse language, limited violence, some suggestive sexual dialogue and situations.

Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence.

Mature audiences only. This program may contain mature themes, profane language, graphic violence, and explicit sexual content.

U.S. Movies

This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will also be blocked automatically.

Note: Some movies are not rated for a variety of reasons. Old

movies and foreign films are usually not rated.

Procedure

• Press CH q or CH p to move between different ratings.

• Use t VOL or VOL u to select ratings you want to block (RED) and unblock (GREEN).

• Press to return to V-CHIP SET.

• Press CH q to select HOW LONG?

• Press t VOL or VOL u to select 12, 24, 48 hours or

• Press to return to Main Menu, then press CH p

PG-13

NC-17 NO ONE 17 AND UNDER ADMITTED.

Canadian English

The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two rating systems used in Canada. PIP will also be blocked automatically.

ACTION

ALWAYS.

ACTION

to exit.

U.S. Movies Rating Chart Description

G GENERAL AUDIENCES. All ages admitted.

X ADULTS ONLY.

CONTAINS NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS . Movie has

not been rated or rating does not apply.

PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.

PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under

13. RESTRICTED. Under 17 requires accompanying

parent or adult guardian.

24 l

LOCK (cont.)

Canadian English (cont.)

Note: E (Exempt) programming includes: news, sports,

documentaries and other information programming, talk shows, music videos, and variety programming.

IC ON MENUS OPERATION

Note: E (Exempt) programming includes: news, sports,

documentaries and other information programming, talk shows, music videos, and variety programming.

Procedure

• Press CH q or CH p to move between different ratings.

• Use t VOL or VOL u to select ratings you want to block (RED) and unblock (GREEN).

• Press twice to return to V-CHIP SET.

ACTION

• Press CH q to select HOW LONG?

• Press t VOL or VOL u to select 12, 24, 48 hours or ALWAYS.

• Press to return to Main Menu, then press CH p

ACTION

to exit.

Canadian English Rating Description

Exempt - Exempt programming includes:

C8+

14+

18 ADULTS ONLY

news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

Programming intended for children under age

8. No offensive language, nudity or sexual content.

Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content.

General programming, suitable for all audiences.

Parental Guidance suggested. Some material may not be suitable for children.

Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.

Canadian French

The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings categories. PIP will also be blocked automatically.

Procedure

• Press CH q or CH p to move between different ratings.

• Use t VOL or VOL u to select ratings you want to block (RED) and unblock (GREEN).

• Press twice to return to V-CHIP SET.

• Press CH q to select HOW LONG?

• Press t VOL or VOL u to select 12, 24, 48 hours or

• Press to return to Main Menu, then press CH p

ACTION

ALWAYS.

ACTION

to exit.

Canadian French Rating Description

E Exempt - Exempt programming.

General - Programming intended

8 ans +

13 ans +

16 ans +

18 ans +

for audience of all ages. Contains no violence, or the violence content is minimal or is depicted appropriately.

8+ General - Not recommended for young children. Programming intended for a broad audience but contains light or occasional violence. Adult supervision recommended.

Programming may not be suitable for children under the age of 13 Contains either a few violent scenes or one or more sufficiently violent scenes to affect them. Adult supervision strongly suggested.

Programming may not be suitable for children under the age of 16 Contains frequent scenes of violence or intense violence.

Programming restricted to adults. Contains constant violence or scenes of extreme violence.

ENGLISH

25 l

IC ON MENUS OPERATION

Main Picture

Split Picture

LOCK (cont.)

Main and Split Blocking Message

If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all locks and rating blocks are disabled until the TV is turned off or until all settings are off.

Note: If you enter your four-digit secret code to override rating

blocks, you must reset all rating blocks by either reprogramming or turning the TV off.

ENGLISH

PIP Blocking Message

PIP function is available when V-chip feature is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will disappear and a blocking message will appear on screen.

Note: If the V-chip feature is activated while PIP is on, PIP will

immediately disappear. Enable PIP functions by setting V-CHIP ratings to OFF.

r MODE - This television contains a built-in decoder

that displays (Closed Captioned) text across the

screen (white or colored letters on black background). It allows the viewer to read the dialogue of a television program or other information. The program viewed must include Closed Captioning for the feature to work. Activate the onscreen Closed Caption feature by selecting one of the following modes.

• OFF - When Closed Caption is not desired.

• C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture). Text may be in any language.

• C2 to C4 - For other modes of video related information.

• T1 to T4 - For program guide and other information to be displayed, when available. (Blocks a large portion of the picture on the television screen).

Note: C1 mode is recommended for viewing Closed Caption.

r OTHER ADJ.

Highlight OTHER ADJ. and press VOL u to enter sub submenu field.

Note: While sub sub-menu features are highlighted, press

VOL u to adjust or activate.

SET UP

r While the desired sub menu is highlighted, press VOL u to

select or activate feature.

r IDIOMA/LANGUE - Select to change menu language

to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French).

r ANTENNA - To select either ANT1 or ANT2. r ON MUTE - Activates the onscreen Closed

Caption feature when the MUTE button on the remote control is pressed. To deactivate press MUTE again.

• MODE - To select TV (antenna) or CABLE mode depending on the signal source.

• AUTO PROGRAM - To automatically program all channels with a signal.

• MANUAL PROGRAM - To manually add or delete channels.

• AUTO POWER ON - Select SET to power up the TV at the same time as the Cable box or other components or select OFF.

• CHAN BANNER - Select ON to display onscreen banner when changing channels.

• GEOMAGNETIC CORR - This feature is used to

adjust discoloration of the picture due to earth’s magnetic field in the area.

• TILT CORRECTION - This feature is used to adjust

the tilt of the picture due to earth’s magnetic field in the area.

• IMAGE SHIFT - Selecting ON is recommended for this feature to prevent image retention on screen.

26 l

Troubleshooting Chart

Before calling for service, determine the symptoms and follow suggested solutions.

AUDIO VIDEO Solutions

TROUBLESHOOTING CHART

Adjust Antenna Location and Connection

Noisy Audio

No Audio

Noisy Audio

No Audio

Snowy Video

Multiple Image /

Color shift in picture

Interference

Normal Video

No Video with Snow

No Video / No PIP

Adjust Antenna Location and Connection Check Antenna Lead-in Wire

Move television from Electrical Appliances, Lights, Vehicles and Medical Equipment

Increase Volume Check Mute Check television SPEAKERS on/off Change Channel

Set TV or Cable Mode Properly Check Antenna Cables

Check Power Cord is Plugged into Active Outlet Adjust Brightness and Audio Controls Change Channel Check Cable Connections Program the Remote Control Again Check Second Video Source Operation Make sure that a PC is not connected to DVI (DIGITAL-IN) input.

Note: This HDTV Monitor is not intended to be used with a PC.

ENGLISH

Picture shifts slightly (vertically)

Normal Audio

Wrong Audio

Normal Audio

Normal Audio Normal Video

Intermittent Remote Control Operation

when turned on, changing channels

or within a duration of two (2) hours

of viewing.

No Color

Normal Video

Black Box on Screen

This is a normal condition to prevent image burn-in. This feature can be turned off. However, turning off this feature may result in image retention on screen. (refer pg. 26)

Adjust Color Settings Change Channel

Check Audio Is Set To Stereo or Mono, Not SAP

Change CC (Closed Captioning) from Text Mode

Replace Remote Control Batteries

27 l

IN DEX

Index

Numerics

3D Y/C Filter 21

AC Power Supply Cord 3 AI Sound 21 Amplifier Connection 6 Antenna 26 Antenna Connection 3 Aspect Button 7 Audio 21 Auto Program 4

Balance 21

ENGLISH

Basic Menu Navigation 20 Bass 21 Battery Installation 10, 14 BBE 21 BBE Button 7 BBE VIVA 3D 21 Brightness 21

Cable / Antenna Connection 3 Cable Box Connection 5 Cable Connection 3 Canadian English 24 Canadian English Rating

Description 25 Canadian French 25 Canadian French Rating

Description 25 Care and Cleaning 2 Channel Scan 22 Channels 22 Clock Set 22 Codes For Cable Box 13, 18 Codes For Cassette Decks 19 Codes For CD Player 19 Codes For DBS 13, 18 Codes For DVD 13, 18 Codes For Personal Video

Recorders 19 Codes For Receivers 19 Codes For VCR 13, 18 Color 21 Color Matrix 21 Color Temp 21 Component Codes 12, 17 Component codes 18 Customer Record 2

Digital TV - Set-Top Box (DTV-STB)

or DVD Connection 6

DVI (Digital Visual Interface)

input connection 7

Enter Code 23

Favorites 22 Feature Chart 2 Freeze Button 9 Front Control Panel 6

Geomagnetic Correction 4

Icon Menus Operation 21 Idioma/Langue 4, 26 Initial Set Up Menu 4 Input Label 22 Input Label Chart 22 Installation 3

Lock 23 Lock Set 23

Main and Split Blocking Message 26 Main Picture Freeze Feature 9 Mono 21 Move Button 9

Natural Color 21 Normal 21

Operating a Cable Box 11, 15 Operating a Cassette Deck 16 Operating a DBS 11, 15 Operating a DTV 16 Operating a DVD 11, 15 Operating a PVR (Personal

Video Recorder) 16 Operating a Receiver 16 Operating a VCR 11, 15 Operating Components with

Remote Control 11, 15 Optional Cable Connections 3 Optional Equipment Connections 5 Other Adj. 21

Picture 21

Picture In Picture and Split

Operation 8

PIP and Split Operation With a

Cable Box 8 PIP and Split Operational Buttons 8 PIP Blocking Message 26 Pip Min And Pip Max Buttons 9 PIP Operation 8 PIP, Split and Freeze Mode

Buttons Operational chart 9 Program Out Connection 7 Programming The Remote 12, 17

Regarding The Use Of Video Games 3 Remote Control Operation 10, 14

SAP 21 SAP Button 7 Search Button 8 Set Up 26 Sharpness 21 Sleep 22 Speakers 22 Special Remote Buttons 7 Specifications 2 Split Operation 8 Stereo 21 Surround 22

Television Location 3 Tilt Correction 4 Timer 21, 22 Timer 1 And Timer 2 22 Tint 21 Treble 21 TV/Video Button 8

U.S TV Programs 23 U.S. Movies 24 U.S. Movies Rating Chart

Description 24 U.S. TV Programs Rating Chart

Description 24

V-Chip Set 23 VCR and Cable Box Connection 5 VCR Connection 5 Video NR 21

28 l

+ 67 hidden pages

Panasonic CT-36HL43G User Manual

Table of Contents

Congratulations

Customer Record

Care and Cleaning

Feature Chart

Specifications

Installation

Television Location

Optional Cable Connections

AC Power Supply Cord

Cable / Antenna Connection

Initial Set Up Menu

Optional Equipment Connections

Front Control Panel

DVI (Digital Visual Interface) input connection

Special Remote Buttons

PIP Operation

PIP and Split Operation With a Cable Box

PIP and Split Operational Buttons

TV/VIDEO Button

Split Operation

Main Picture Freeze Feature

PIP MIN and PIP MAX Buttons

PIP, Split and Freeze Mode Buttons Operational chart

Remote Control Operation (models CT-32HXC43, CT-32HC43 and CT-36HC43)

Battery Installation

Operating Components with Remote Control

Programming The Remote

Programming Without A Code

Component Codes

Remote Control Operation (models CT-32HL43 and CT-36HL43)

Battery Installation

Operating Components with Remote Control

Programming the Remote

Programming without a Code

Component Codes

Basic Menu Navigation

Icon Menus Operation

PICTURE

AUDIO

CHANNELS

TIMER

LOCK

SET UP

Troubleshooting Chart

Index