Panasonic CT 32HL43 User Manual
HDTV Monitor
Operating Instructions
Monitor HDTV
Instrucciones de Operación
Écran à haute définition
Manuel d’utilisation
CT-32HL43
CT-36HL43
CT-32HC43
CT-32HXC43
CT-36HC43
TQB2AA0467 30422
PRINTED IN USA
IMPRESO EN EE.UU
IMPRIMÉ AUX ÉTATS-UNIS
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock do not remove cover or back. No
user-serviceable parts inside. Refer servicing to qualified service personnel.
ENGLISH
The lightning flash with arrow
head within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture and objects filled with liquids, such as vases,
should not be placed on this apparatus.
The Class II insulation symbol (square within a square) indicates
that this product has been evaluated and tested to comply with
Class II insulation requirements.
FCC CAUTION:
ANY CHANGES OR MODIFICATIONS TO THIS TV
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.
RECEIVER NOT EXPRESSLY APPROVED BY
MATSUSHITA ELECTRIC CORPORATION OF AMERICA
COULD CAUSE HARMFUL INTERFERENCE, WHICH
WOULD VOID THE USER’S AUTHORITY TO OPERATE
THIS EQUIPMENT.
FCC INFORMATION
This equipment has been tested and found to comply with the limit for a Class B Digital Device in
accordance with the specifications in Part 15 of the FCC Rules. The limits are designed to provide
reasonable protection against radio and television interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications, However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception (which you can determine by
turning the equipment off and on), try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ENVIRONMENTAL NOTICE:
The Energy Star label, a symbol for energy efficiency, was created by the U.S.
Environmental Protection Agency (EPA) and the U.S. Department of Energy
(DOE) to help customers identify products that can save them money and protect
the environment by saving energy. Energy Star compliant products generally
consume less energy than similar standard products.
High Definition Sound
THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER
COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS
MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL
CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION
PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS
INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866,
5510752 and 5736897. BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
Table of Contents
TABLE OF CONTENTS
Congratulations ...............................................2
Customer Record........................................................ 2
Care and Cleaning...................................................... 2
Specifications.............................................................. 2
Feature Chart.............................................................. 2
Installation........................................................3
Television Location ..................................................... 3
Optional Cable Connections ....................................... 3
AC Power Supply Cord............................................... 3
Cable / Antenna Connection....................................... 3
Important Information .................................................. 3
Initial Set Up Menu...........................................4
Optional Equipment Connections..................5
VCR ............................................................................ 5
Cable Box................................................................... 5
VCR and Cable Box.................................................... 5
Amplifier (TO AUDIO AMP) ........................................ 6
Digital TV - Set-Top Box (DTV-STB) or DVD Players 6
Front Control Panel..................................................... 6
DVI (Digital Visual Interface) input connection ........... 7
Program Out connection............................................. 7
Special Remote Butttons............................................ 7
PIP And Split Operation ..................................8
PIP Operation ............................................................ 8
Split Operation ........................................................... 8
PIP and Split Operation With a Cable Box ................ 8
PIP And Split Operational Buttons.................8
TV/Video Button.......................................................... 8
Search Button .............................................................. 8
Move Button ................................................................. 9
PIP MIN and PIP MAX Buttons.................................... 9
Freeze Button.............................................................. 9
Main Picture Freeze Feature....................................... 9
PIP, Split and Freeze Mode Butons
Operational Chart ..................................................... 9
Remote Control Operation (models
CT-32HXC43, CT-32HC43 and CT-36HC43).......... 10
Battery Installation...................................................... 10
Operating Components with Remote Control............. 11
Programming the Remote.......................................... 12
Programming Without a Code.................................... 12
Component Codes ..................................................... 12
Remote Control Operation
(models CT-32HL43 and CT-36HL43) ....... 14
Battery Installation...................................................... 14
Operating Components with Remote Control............. 15
Programming the Remote.......................................... 17
Programming Without a Code.................................... 17
Component Codes ..................................................... 17
Basic Menu Navigation................................. 20
Icon Menus Operation.................................. 21
Picture........................................................................ 21
Audio .......................................................................... 21
Channels .................................................................... 22
Timer .......................................................................... 22
Lock............................................................................ 23
Set Up ........................................................................ 26
Troubleshooting Chart ................................. 27
Index............................................................... 28
ENGLISH
Note: The warranty and service center information is located in the back of this manual.
Read these instructions completely before operating television.
Contents are subject to change without notice or obligation.
Copyright 2003 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.
1 l
CON GRATULATIONS
Congratulations
Your new Panasonic Tau television features state-of-theart technology for high quality picture and sound with
complete audio/video connections for your home theater
system. Your TV is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the
factory for best performance.
Customer Record
The model and serial number of this product are located on
the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent
record of your purchase. This will aid in identification in the
event of theft or loss. Product registration for U.S. customers
is available at: www.prodreg.com/panasonic.
ENGLISH
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
• Use a mild soap solution or window cleaner with a soft
clean cloth. DO NOT USE ABRASIVE CLEANERS.
• Avoid excessive moisture and wipe dry.
Note: Do not spray any type of cleaning fluid directly on the
screen.
Feature Chart
MODELS
FEATURES
MENU LANGUAGE ENG/
SPAN/FR
2 TUNER SPLIT
2RF
CLOSED CAPTIONING
V-CHIP CAPABILITY
DIGITAL SCAN RATE
NTSC LINE-DOUBLER
VIDEO NORM
AUDIO NORM
CT-32HL43
CT-36HL43
CT-32HC43
CT-36HC43
• • •
• • •
• • •
• • •
• • •
1080i,
1080i,
480p
1080i,
480p
480p
480p 480p 480p
• • •
• • •
CT-32HXC43
Cabinet and Remote Control
• For cabinets and remote control, use a soft cloth
dampened with water or a mild detergent solution. Avoid
excessive moisture and wipe dry.
• Do not use benzene, thinner or other petroleum based
products.
Specifications
Specifications are subject to change without notice or
obligation.
Power Source
DVI Input jack (some models) 1.0 compatible
Component Input (Y / PB / PR) 75 Ohm, Phono Jack Type
CT-32HC43 (3.6A)
CT-32HC43U (3.6A)
CT-32HL43 (3.6A)
CT-32HL43U (3.6A)
CT-32HXC43 (3.6A)
CT-36HC43 (3.6A)
CT-36HC43U (3.6A)
CT-36HL43 (3.6A)
CT-36HL43U (3.6A)
Channel Capability - 181 VHF- 12; UHF-56; Cable-113
Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type
Audio Input Jacks 500mV RMS 47K Ohm
Video out jack 1Vp-p, 75 Ohm, Phono Jack Type
Audio Output Jacks 0-2.0V RMS 4.7K Ohm
S-Video Input Jacks S-Video (Y-C) Connector
120V AC, 60Hz
STEREO
AI SOUND
BASS/BALANCE/TREBLE
SURROUND
SUBWOOFER
BBE VIVA 3D
BBE
A/V IN (REAR/FRONT)
AUDIO OUT
DVI INPUT
S-VHS INPUT
COMPONENT INPUTS
• • •
• • •
• • •
• • •
•
•
• • •
4
4
(3/1)
(3/1)4 (3/1)
• • •
•
• • •
• • •
2 l
HEADPHONE JACK
• • •
Installation
Incoming Cable from
INSTALLATION
Television Location
This unit is intended to be used with an optional stand or
entertainment center. Consult your dealer for available
options.
• Avoid excessive sunlight or bright lights, including
reflections.
• Keep away from excessive heat or moisture. Inadequate
ventilation may cause internal component failure.
• Fluorescent lighting may reduce remote control
transmitting range.
• Keep away from magnetic equipment, including motors,
fans and external speakers.
WARNING: Use this television receiver only with the
cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
In order to avoid injury to children, never place your television
receiver on a piece of furniture that is capable of being tilted by a
child leaning on it, pulling on it, standing on it, or climbing on it. A
falling television can cause serious injury or even death.
CT-32HL43, CT-32HL43U:
CAUTION: These television receivers for use only with
PANASONIC TY-32HL43T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
Cable Connection
Connect the cable supplied by your local
cablecompany to ANT1 connection on
back of television. Select cable mode and
ANT1 in the SET UP menu (refer to page
26).
Note: A cable converter box may be
required for proper reception.
Check with your local cable company for compatibility
requirements.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Antenna Connection
• For proper reception of VHF/UHF channels, an
external antenna is required. For best reception an
outdoor antenna is recommended.
• Connect home antenna to
ANT1 connection on back of
television. Select TV mode
and ANT1 in the SET UP
menu. (refer to page 26)
Note: Cable Mode is preset at the
factory. Antenna users must
change to TV Mode and ANT 1 in the Set Upmenu.
Home Antenna
Important Information Regarding The Use Of
Video Games, Computers, Or Other Fixed
Image Displays.
ENGLISH
CT-36HL43, CT-36HL43U:
CAUTION: These television receivers for use only with
PANASONIC TY-36HL43T stand. Use with other carts
(or stands) is capable of resulting in instability causing
possible injury.
Optional Cable Connections
Shielded audio and video cables should be used between
components. For best results:
• Use 75-ohm coaxial shielded cables.
• Use appropriate input and output connectors, that match
your component connectors.
• Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
OF AC OUTLET AND FULLY INSERT. DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED
OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,
CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT
FROM THE APPARATUS.
Polarized plug
Cable / Antenna Connection
For proper reception, either a cable or antenna connection
is required.
WARNING: The marking or retained image on the
picture tube resulting from viewing fixed image is
not an operating defect and as such is not covered
by Warranty.
The television is designed to display constantly moving
images on the screen. Continuous viewing of
stationary images such as letterbox pictures on
standard screen TVs (with top/bottom bars), nonexpanded standard (4:3) pictures on wide screen TVs
(with side bars shown on each side of an image), stock
market report bars (ticker running at the bottom of the
screen), video game patterns, fixed scoreboards,
bright station logos, on-line (Internet) or repetitive
computer style patterns should be limited.
The extended use of fixed image program material can
cause a permanent picture tube damage, shown as a
“shadow image” viewable on normal programs. This
type of irreversible picture tube deterioration can be
limited by performing the following steps:
• Limit the display of fixed image program material to
no more than 15% of total viewing time per week.
• Turn the power off when not in use.
3 l
IN ITIAL SET UP MENU
Initial Set Up Menu
For your convenience, Auto Set up menu will be displayed
on screen when the set is turned on for the first time. If
needed, follow the menus and procedures for setting up the
features.
IDIOMA/LANGUE
To change menu language to ENGLISH, SPANISH or
FRENCH.
Procedure
• Press VOL u to select English, Spanish or French.
ENGLISH
MODE
To select TV (antenna) or CABLE mode depending on the
signal source.
Procedure
• Press VOL u to select TV or CABLE.
TILT CORRECTION
This feature is used to adjust the tilt of the picture due to
earth’s magnetic field in the area.
Procedure
• Press VOL u to display adjustment menu.
• Press t VOL or VOL u to adjust picture tilt.
AUTO PROGRAM
To automatically program all channels with a signal.
Procedure
• Press VOL u to start Auto Programming.
GEOMAGNETIC CORRECTION
This feature is used to adjust discoloration of the picture
due to the earth’s magnetic field in the area.
Procedure
• Press VOL u to display adjustment menu.
• Press t VOL or VOL u to adjust discoloration in
picture.
4 l
Optional Equipment Connections
Notes:
• The remote control must be programmed with supplied
codes to operate the optional equipment.
• Models CT-32HC43, CT-36HC43 and CT-32HXC43 do
not have DIGITAL INPUT.
VCR Connection
Follow this diagram when connecting your television to a
VCR only.
Viewing a television program
Procedure
• Select ANT1 in the SET UP menu under Prog Chan
(Program Channels).
• Tune the television to the program you want to view.
Viewing a video
Procedure
r Option A
• Select ANT1 in the SET UP menu.
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Begin the video.
r Option B
• Select ANT2 in the SET UP.
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Begin the video.
Recording a television program
OPTIONAL EQUIPMENT CONNECTIONS
• Tune the television to the program you want to view.
Cable Box Connection
Follow this diagram when connecting your television to a
cable box only.
ENGLISH
Viewing a premium (scrambled) cable channel
Procedure
• Select ANT2 in the SET UP menu.
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
Note: To use special features such as Favorite Channels and
Channel Captions ANT1 must be selected in the SET UP
menu.
VCR and Cable Box Connection
Follow this diagram when connecting your television to
both a VCR and a cable box.
Procedure
r Option A (Recording and viewing the same program)
• Select ANT2 in the SET UP menu.
• Tune the television to Channel 3 or 4, depending on your
VCR.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
r Option B (Recording one program while viewing another
program)
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Using the VCR, tune to the television program you want
to record.
• Begin recording.
• Press the TV/VIDEO button on the remote control to
switch back to TV mode.
Viewing a premium (scrambled) cable channel
Procedure
• Select ANT2 in the SET UP menu.
• Tune the television to Channel 3.
• Using the cable box, tune to the premium cable channel
you want to view.
Note: To use special features such as Favorite Channels and
Channel Captions ANT1 must be selected in the SET UP
menu.
5 l
OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment Connections (cont.)
VCR and Cable Box Connection (Cont.)
Note: Models CT-32HC43, CT-36HC43 and CT-32HXC43 do
not have DIGITAL INPUT.
Recording a premium (scrambled) cable channel
Procedure
• Select ANT2 in the SET UP menu.
• Press the TV/VIDEO button on the remote control to
select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.
• Turn the VCR ON.
• Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.
• Using your cable box, tune to the premium cable channel
ENGLISH
r To view a different channel while recording:
you want to record.
• Begin recording.
• Select ANT1 in the SET UP menu.
• Press the TV/VIDEO button on the remote control to TV
mode.
• Tune the television to a program (except another
premium cable channel).
Amplifier Connection (TO AUDIO AMP)
To listen the audio through a separate stereo system,
connect an external audio amplifier TO AUDIO AMP
outputs on back of television.
Note: TO AUDIO AMP terminals cannot be connected directly
to externalspeakers.
Digital TV - Set-Top Box (DTV-STB) or DVD
Connection
This television is capable of displaying 1080i and 480p DTV
signals when connected to a DTV tuner set-top-box (STB). In
order to view DTV programming, the STV must be connected
to the component video inputs (Y,PB,PR) of the television. A
DTV signal must be available in your area. Select the output of
the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which
de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB (Digital TV Set-TopBox) or DVD player to the back of
Front Control Panel
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
Note: The ON/OFF indicator LED (red) will be lit when set
is on.
Audio Adjustments
• Select SPEAKERS ON located in the onscreen AUDIO
menu.
• Set amplifier volume to minimum.
• Adjust television volume to desired level.
• Adjust amplifier volume to match the television.
• Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.
• Volume, mute, bass, treble and balance are now
controlled through the television.
Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
6 l
A second VCR, Camcorder, a video disc player, video
game equipment or DSS equipment can also be connected
to the video inputs. See the optional equipmentmanual for
details.
Procedure
• Connect equipment to front Audio/Video input jacks.
• Press TV/VIDEO button to select VIDEO 4 input mode.
• Operate optional equipment as instructed in equipment
manual.
Optional Equipment Connections (cont.)
OPTIONAL EQUIPMENT CONNECTIONS
DVI (Digital Visual Interface) input connection
(for models CT-32HL43 and CT-36HL43 only)
The DVI/HDCP1 input on your TV can accommodate copy
protected digital programming. The DVI/HDCP input
terminal complies with the EIA-861Profiles2 standard and is
not intended for use with personal computers. The DVI/
HDCP input can be connected to an EIA/CEA 861
compliant consumer electronic device, such as a set top
box or DVD player equipped with a DVI output connection3.
The DVI/HDCP input is designed for best performance with
HDTV signals, such as 1080i. The DVI/HDCP input will
also accept and display 480i and 480p picture signals.
Notes:
1. DVI/HDCP = Digital Visual Interface / High-Bandwidth
Digital Copy Protection.
2. EIA/CEA-861 Profiles compliance covers profiles for
transmission of uncompressed digital video including
high bandwidth digital content protection.
3. Consult your consumer electronics dealer for availability
details.
Follow the diagram below to connect the TV to a set top
box or a DVD player.
Procedure
• Press TV/VIDEO button on the remote control to select
DIGITAL-IN input.
• Connect the DVI output from the set top box or a DVD
player to the DVI input on the back of the TV.
• Connect the Audio Out signal from the set top box or
DVD player to the Audio In input associated with the
DIGITAL INPUT.
Note: This HDTV Monitor is not intended to be used with a PC.
Program Out Connection (PROG OUT)
To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.
Note: If the Main Picture signal is Component Video Input, no
Program out signal will be available..
TERMINALS ON BACK OF TV
MONITOR
CABLES NOT SUPPLIED
VCR
OR
Procedure
• Connect optional equipment to PROG OUT a ndTO
AUDIO AMP terminals.
• PROG OUT terminal display is the same as on-screen
display.
• See optional equipment manual for further instructions
for recording and monitoring.
Special Remote Buttons
ASPECT Button
The ASPECT button on the remote control lets you select
the picture size ratio to match programming format when
using DTV STB or DBS.
BBE Button
Press this button to turn the BBE VIVA 3D feature
(available in CT-36HL43 and CT-32HL43 only) or BBE
sound feature On or Off.
SAP Button
Press this button to let you cycle through different audio
modes. If you are receiving a stereo program and you
press the SAP button, you can cycle between STEREO
and MONO.
ENGLISH
®
7 l
PICTURE IN PICTURE AND SPLIT OPERA TION
PIP
PIP CH
CH
RECALL
PIP
PIP CH
PIP
PIP
Picture In Picture and Split Operation
Note: The shapes of PIP and SPLIT function buttons may vary
PIP Operation
This television includes a two-tuner Picture In Picture (PIP)
feature. This allows you to watch two (2) live broadcasts at
the same time with or without an external video source
such as a VCR, cable box, etc.
Procedure
ENGLISH
depending on the remote control.
• Connect incoming cable to ANT 1 input on back of TV.
• Press to display PIP frame.
• Select channels for the PIP frame by pressing
.
• Select channels for the Main picture by pressing
or
CH
or use the remote control numeric keypad.
• Press to switch the PIP and MAIN PICTURE
SWA
source.
• Press to view picture source status.
• Press to cancel PIP frame.
PIP and Split Operation With a Cable Box
To view premium (scrambled) cable channels through your
cable box in the Main Picture:
Note: Use this procedure if you want to watch premium cable
channels in the Main Picture while viewing a television
program or video in the PIP or Split frame.
Procedure
• Select ANT 2 in the SET UP menu.
• Tune TV to Channel 3.
SPLIT
• Press or on the remote control to display
the PIP or Split frame.
Note: Audio is from the Main Picture only.
• Verify the Cable box is ON.
• Choose channels for the Main Picture by tuning the
cable box.
• Choose channels for the PIP frame by pressing
.
Note: Swap is not available when using the cable box to tune
channels. If your cable box has video output, it can be
connected to the TV to allow you to use all PIP functions.
See the equipment manual for more information.
PIP and Split Operational Buttons
TV/VIDEO Button
Main Picture
PIP Frame
Note: Audio is from Main Picture only.
Split Operation
This feature lets you watch two different channels side by
side with or without an external video source.
Procedure
SPLIT
• Press to display Split screen.
• Select channels for the Split by pressing .
• Select channels for the Main picture by pressing
CH
or
CH
• Press to switch the SPLIT SCREEN and MAIN
PICTURE source.
• Press to view picture source status.
• Press to cancel Split screen.
or use the remote control numeric keypad.
SWA
RECALL
SPLIT
Press when PIP or Split frame is displayed to select
desired input mode.
Main Picture
CH #
Main Picture
COMPONENT1 COMPONENT2
VIDEO 1/2/3/4
PIP Frame
COMPONENT1 COMPONENT2
VIDEO 1/2/3/4
SPLIT Frame
DIGITAL-IN
(some models)
DIGITAL-IN
(some models)
Search Button (PIP and Split)
This feature lets you scan through all available channels.
Procedure
SPLIT
• Press or to display PIP or Split frame.
8 l
PIP Operation (cont.)
SEARCH
SEARCH
PIP
PIP
PIP
PIP
PIP
FREEZE
FREEZE
FREEZE
FREEZE
PICTURE IN PICTURE AND SPLIT OPERATION
OPEN/CLOSE
• Press to display search frames.
• Press again to stop search feature. PIP or
p
OPEN/CLOSE
p
Split frame channel will be the last active search frame.
SPLIT
• Press or to cancel PIP or Split frame
2
Main Picture
3
Search Frames
4
Move Button (PIP only)
This feature is used to move PIP frame to one of four
corners.
Procedure
• Press to display PIP frame.
MOVE
• Press to position PIP frame to desired corner.
• Press to cancel PIP frame.
• Press to stop PIP or Split frame action.
TV/VCR
TV/VCR
• Press again to continue action.
PIP
SPLIT
• Press or to cancel PIP frame.
Main Picture
Main Picture
PIP freeze frame
Split freeze frame
Note: Audio is from Main Picture only.
Main Picture Freeze Feature
This feature is used to stop action of the Main Picture and
display it on a Split or PIP freeze frame.
Procedure
• To stop action for Main picture, press while
PIP or Split frame is not displayed.
• Main Picture freeze will be displayed in a PIP or Split
frame, depending on the selection in the Freeze menu
located in Picture Other ADJ. section (refer to page 21).
TV/VCR
ENGLISH
Main Picture
PIP Frame
PIP MIN and PIP MAX Buttons
While PIP frame is displayed, press PIP MIN or PIP MAX
button to vary the size of PIP frame.
Procedure
• Press to display PIP frame.
PIP MIN PIP MAX
• Press or to size PIP frame.
• Press to cancel PIP frame.
MAX
Main Picture
MIN
Freeze Button (PIP and Split)
This feature is used to stop action in PIP or Split frame.
Procedure
• Press or to display PIP or Split frame
PIP
SPLIT
• Press again to cancel Main Picture freeze
TV/VCR
frame.
Note: While Main Picture freeze frame is displayed, only
MOVE button is active for PIP, all other PIP and Split
buttons has no effect (see chart).
PIP, Split and Freeze Mode Buttons Operational chart
This chart indicates the buttons that are operational with
PIP, Split or Main Picture Freeze mode.
REMOTE
BUTTONS
PIP MIN
PIP MODE SPLIT MODE
Size Smaller No Effect No Effect
PIP MAX Size Larger No Effect No Effect
FREEZE
PIP CH
SEARCH
PIP
SPLIT
MOVE
SWAP
Freeze PIP
frame
Change
Channel
Displays
Search Frame
Displays PIP
Frame
Displays Split
Frame
Move PIP
Frame
Swap with Main
Picture
Freeze Split
Frame
Change
Channel
Displays
Search
Frame
Displays PIP
Frame
Displays Split
Frame
No Effect
Swap with
Main Picture
MAIN
PICTURE
FREEZE
MODE
Display or
Delete
No Effect
No Effect
No Effect
No Effect
Move PIP
Frame
No Effect
9 l
REMOTE CONTROL OPERATION (MODELS CT-32HXC43, CT-32HC43 AND CT-36HC43)
C
R
Remote Control Operation (models CT-32HXC43, CT-32HC43 and CT-36HC43)
POWER
Press to turn ON and OFF.
D
B
S
/
ACTION
C
B
V
V
T
Press to select remote operation.
Press to access menus.
ENGLISH
MUTE
Press to mute sound. Press to display and
cancel CC (Closed Caption).
TV/VIDEO
Press to select TV or input modes.
BBE
MENU
BBE - Press to turn on or off.
MENU- Press to access DBS or DVD menus.
SAP
Press to access audio modes (Stereo, SAP or
Mono)
L
D
V
D
Press to adjust TV sound and navigate in
menus.
Press to select next or previous channel and
navigate in menus.
Press to display time, channel, sleep timer,
and other options.
SEARCH - Press for PIP or SPLIT search.
GUIDE - DBS functions button
DBS functions button.
VOL VOL
CH
CH
RECALL
SEARCH
GUIDE
EXIT
1 2
4
7
3
5
6
8
9
0
Press numeric keypad to select any channel.
R-TUNE
Press to switch to previously viewed
channel or input modes.
*Remote EUR7613Z80 is same as EUR7613Z40,
except it has a silver body.
EUR7613Z40
*EUR7613Z80
Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up neararrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Note: Incorrect installation can cause battery leakage and
corrosion that will damage the Remote Control
ASPECT
PROG
ASPECT - Select picture size (ratio) to match
programming format.
PROG - Press to enter minor number in a
compound number.
*PIP MIN
REW
*SWAP
PAUSE
*FREEZE
TV/VCR
*Split and PIP function buttons
Component function buttons
*SPLIT
PLAY
u
*MOVE
STOP
VCR /DBS CH
Precautions
• Replace batteries in pairs.
• Do not mix battery types (zinc carbon
with alkaline).
• Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
*PIP CH
*PIP MAX
FF
*PIP
REC
10 l
REMOTE CONTROL OPERATION (MODELS CT-32HXC43, CT-32HC43 AND CT-36HC43)
TV/VIDEO
EXIT
Operating Components with Remote Control
Note: Refer to page 12 for programming Remote Control
procedure.
Operating a VCR
Program the remote control to use with VCR.
TO DO THIS... PRESS
Turn on/off
POWER
Operating a DBS
Program the remote control to use with DBS.
TO DO THIS... PRESS
Turn on/off
Display DBS menu
POWER
ACTION
Select TV Input mode for VCR
Change Channels up/down
Record
Play
Stop
Fast Forward
Rewind the Tape
Pause
Change to TV or VCR Mode
On screen VCR Display
VCR/DBS CH
REC
PLAY
u
STOP
FF
REW
PAUSE
TV/VCR
RECALL
Operating a CABLE BOX
Program the remote control to use with Cable Box.
TO DO THIS... PRESS
Menu Navigation
CH
CH
1 2
4
Select a Channel
5
7
8
0
Program Information
Back to previous channel
Select next page up/down
Exit menus
Display program Guide
RECALL
R-TUNE
VCR/DBS CH
GUIDE
Operating a DVD
Program the remote control to use with DVD
TO DO THIS... PRESS
Turn on/off
POWER
VOL VOL
3
6
ENGLISH
9
Turn on/off
Select a Channel
Change Channels Up/Down
Back to previous channel
POWER
1 2
4
7
CH
CH
R-TUNE
Next/Previous Chapter
3
5
6
8
9
0
DVD Display
Skip Search Reverse
Skip Search Fast Forward
Play
DVD Open/Close
Stop
Still
Slow + / -
CH
CH
RECALL
REW
FF
PLAY
u
TV/VCR
STOP
PAUSE
VCR/DBS CH
11 l
Loading...