Panasonic CT-32G33, CT-27G33 Owner’s Manual
Panasonlc
Color Television
Operating Instructions
CT-27G33 CT-32G33
CT-36G33
_ TQB2AA0260
PRINTEO IN MEXICO 80306
Table of Contents
Congratulations ........................................................ 2
Installation ................................................................. 3
Picture In Picture (PIP) Operation ........................... 5
Main Menu ................................................................. 7
Main Menu Feature Chart ......................................... 8
TABLE OF CONTENTS
Customer Record ..................................................................... 2
Care and Cleaning ................................................................... 2
Specifications ........................................................................... 2
Television Location................................................................... 3
Optional Cable Connections ..................................................... 3
AC Power Supply Cord ............................................................ 3
Cable / Antenna ........................................................................ 3
Cable Connection ..................................................................... 3
Antenna Connection ................................................................. 3
Optional Equipment Connections ............................................. 4
To Audio Amplifier .................................................................... 4
Audio Adjustments ................................................................... 4
With / Without a VCR and Cable Box ...................................... 5
With a VCR - No Cable Box ................................................... 6
ACTION Button ........................................................................ 7
CH / VOL Buttons ..................................................................... 7
Special Features ..................................................... 10
Languages .............................................................................. 10
Geomagnetic Correction ........................................................ 10
Timer ...................................................................................... 10
Sleep Timer ............................................................................ 10
Program Timer ....................................................................... 11
CH CAP (Channel Caption) .................................................... 12
LOCK ...................................................................................... 12
Game Guard Lock .................................................................. 12
Unlocking Game Guard .......................................................... 13
Troubleshooting Chart ........................................... 14
[]
CONGRA TULA TIONS
Congratulations
Customer Record
Care and Cleaning
Your new TV features a solid state chassis that is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the factory for best performance.
The model and serial number of this product are located on the back of the TV. You should note
the model and serial number in the space provided and retain as a permanent record of your
purchase. This will aid in identification in the event of theft or loss. Product registration is
available at www,prodreg.com/panasonic.
Model
Number
Serial
Number
Screen (Turn TV Off)
Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE
ABRASIVECLEANERS.
Avoid excessivemoistureand wipedry.
Cabinet and Remote Control
[3 For plastic cabinets and Remote Control, use a soft cloth dampened with water or a mild
detergent solution. Avoid excessive moisture and wipe dry.
0 For wooden cabinets, use a soft cloth and an occasional coat of furniture polish to preserve
the finish.
0 Do not use benzene, thinner or other petroleum based products.
Specifications
IB
Power Source
CT-27G33 CT-32G33 CT-36G33
_annel Capability - 181
2 Video Input Jacks
2 Audio Input Jacks
To Audio AMP Jack
S*VHS Input Jack
Specifications are subject to change without notice or obligation,
I VHF-t2; UHF_$6; Cable,il 3
' Ivp-p, 75 Oh'ml'Phono Jack Type
500mV RMS 47K Ohm
0-2.0V RMS 4.7K Ohm
S-Vide0 (Y-C) Connector
120V AC, 60Hz
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment center. Consult your
dealer for available options.
O Avoid excessive sunlight or bright lights, including reflections.
[] Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure,
£3 Fluorescent lighting may reduce Remote Control transmitting range.
[] Avoid magnetic equipment, includingmotors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
[] Use 75-ohm coaxial shielded cables.
[] Check type of output and input connectors on your components.
O Determine required cable lengths.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK,MATCHWIDE BLADE OF PLUG TO
WIDE SLOTOF ACOUTLETAND FULLY INSERT. DONOT USE A PLUGWITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENTBLADE EXPOSURE. FOR SOME MODELSTHAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTORMAY
BE NECESSARY.
INSTALLA TION
Polarized plug
Cable / Antenna
For properreception,either a cable orantenna connection is required•
Cable Connection
Connect the cable supplied by your local cable company•
Note: A cable converter box may be required for proper reception.
Check with your local Cable company for compatibility
requirements•
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required• For
best reception an outdoor antenna is recommended•
Antenna Mode must be set to TV in the SET UP menu.
_ Cable Preset
Cable Mode is preset at the ractory. Antenna
users must change to Antenna Mode in the Set
I Up Menu.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna
[]
INSTALLA'I ION
Optional Equipment Connections
VCR's, video disc players, video game consoles, and DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details.
i- p _ --
,I I
I! :
,I,._I
,l@i
I
I
I
Procedure
1. Connectequipment as shownto rearAudio/Video inputjacks.
2. Select the Video modeby pressingTV/MIDEObutton.
3. Operateoptional equipmentas instructedin equipment manual.
Note: The S-VIDEO connection is optional and overrides other VIDEO
connection. Use INPUT 1, AUDIO R and L with S-VIDEO connection.
TERMINALS ON SACK OF TV VCR
L @ @@ L.1 _',,-.I, .-b'_F_,L I
,oo,o I: OOTPOT,
{., @ o ,
TOAUDI 0 2_ _INPUT IJ _ _ -- _ ,.I
"AMP Jl CABLES NOT SUPPLIED
J
TO AUDIO AMPlifier
Connect to an external audio amplifier input for listening to a stereo system.
Audio Adjustments
[]
Note: TO AUDIO AMP terminals cannot be connected directly to
external speakers.
1. Select TV SPEAKERS ON located in the AUDIO menu on screen.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external amplifier:
Picture In Picture (PIP) Operation
With / Without A VCR And Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Without A VCR (External Video Source)
Procedure
Connect incoming cable to antenna (ANT) input on back of TV.
Press the PIP button on the Remote Control to display the PIP frame.
Note: The audio is for the Main Picture, onl F
Choose channels for the PIP frame by pressing the Remote Control PIP
CHANNEL up/down buttons.
Choose channels for the Main Picture by pressing the Remote Control OH
up/down buttons or by using the numeric keypad.
With A VCR (External Video Source) And Cable Box
Connectyour television toaVCR and Cable Box,as shown,
TERMINALS ON BACK OF TV VCR CABLE BOX
PICTURE IN PICTURE (PIP) OPERATION
0 I
Incoming
Cable
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with suppfied codes to operate the VCR
and Cable Box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note: Theaudio is fromthe Main Picture only.
To view scrambled channels through your Cable Box in the PIP frame:
Press the TVNIDEO button on the Remote Control to select the same video
input which your cable box is connected to.
Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
Choose channels for the PIP frame by pressing the CBL button on the Remote
Control and using the numeric keypad or CH up/down buttons.
Choose channels for the Main Picture by pressing the TV button on the Remote
Note:
Control and using the numeric keypad or OH up/down buttons.
TheSWAP button switches the PIPand MainPicture source. Press theRECALL button for PIP
and Main Picture source status, on screen.
[]
Loading...