– The Automatic Functionality System
– Soft Dry Operating Functionality
– The OFF and ON Duo Functionality Setting or Timer
– Sleep Mode Automatic Regulation
– Automatic Regulation of Airflow Directions
– Wireless Remote Control Functionality to up to 10 meters
– Indoor Unit Functionality for vertical and horizontal airflow direction control
Q: Which is the Most Suitable Temperature for Cooling Purposes?
A: Recommended temperature for cooling purposes should range between 26 degrees to 28 degrees.
Q: In what manner does the sleep mode function?
A: During sleep time mode is initiated, temperature increases by 0.5 for the period of an hour so as to prevent very low cooling of the temperature. After 8 hours the operation stops after soft dry mode or cooling and for the heating mode the operation ends after 5 hours.
Q: Is it possible to adjust the airflow direction by hand?
A: Yes, the remote control can be used to change the vertical or horizontal louvers on the unit to help with airflow adjustment.
Q: What should I do if the airflow is initiated in heating mode after a few seconds delay?
A: As a safety aspect, the unit will not start blowing air until it has finished warming up to a desired temperature as this may lead to an undesirable cooling effect, the yellow lamp will keep blinking and only stop once the airflow starts which indicates a start of heating.
Q: How often are the air filters to be replaced or cleaned?
A: You should clean the air filters every 2 weeks while the air purifying filters should be replaced nearly every 3 months or whenever they are ready to be replaced.